Rear fender ORIGINAL STYLE (suitable for Harley-Davidson models: Nightster from 2022)

This rear fender from Cult-Werk is designed so that it sits approx. 50mm closer to the tire, so you save yourself having to lower the Sportster and the distance between the fender and tire is reduced and created therefore a super cool look! Optically designed like the original rear fender, but shortened to the maximum so that the frame does not have to be shortened. Also suitable for 180 rear tires without modifications!  The original fender struts are still used, as is the splash guard. 100% precisely fitting ABS plastic part - NO GRP! No adjustment work necessary! Minimal painting effort because of perfect surface quality. All holes and millings are milled on the most modern 5-axis CNC machining centers, so that the rear fender only needs to be replaced with the original rear fender. The rear fender is top-notch, fits perfectly and provides a clear view of the rear wheel. Original fit - super cool retro style. After installation, the spring travel must be checked! If necessary, the spring travel must be limited accordingly using a spring travel limiter (item number: HD-UNI033)! IMPORTANT INFORMATION: - The fender is also available in glossy black √§oldly! This means you no longer have to have the fender painted. (Item number: HD-SPO038) - The fender can only be used in conjunction with a very short single seat (single seat not possible from Sportster 2016) or with one of our swing saddles (Item number: HD-SPO068 & ; HD-SPO069)- The fender is not suitable for pillion riding as it would not support the weight due to the material (high-quality ABS plastic)!! THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB √ACCESS PROVIDED!!!

All holes and millings are milled on the most modern 5-axis CNC machining centers, so that the Cult-Werk rear fender only needs to be exchanged for the original rear fender. The rear fender is TOP processed and fits perfectly. After installation, the spring travel must be checked! If necessary, the spring travel must be limited accordingly using a spring travel limiter (item number: HD-UNI033)! IMPORTANT INFORMATION: - The fender is also available in paintable versions. old! This means it comes with a perfectly primed surface for the painter. (Item number: HD-SPO072) - The fender can only be used in conjunction with a very short single seat (single seat not possible from Sportster 2016) or with one of our swing saddles (Item number: HD-SPO068 & ; HD-SPO069)- The fender is not suitable for pillion riding as it would not support the weight due to the material (high-quality ABS plastic)!! THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB √ACCESS PROVIDED!!!

The swinging rear fender 'ÄûOld School'Äú from Cult-Werk suitable for Harley-Davidson Softail a real eye-catcher! Especially if you want to achieve a cool old-school look on your motorcycle, this is the perfect part for it! All holes and millings are milled on the most modern 5-axis CNC machining centers, so the part fits perfectly and without adjustments! The fender can be installed in different lengths to remain T√úV compliant and then it can simply be shortened at the desired point when attaching it to the swingarm! IMPORTANT INFORMATION: We definitely recommend our frame cover (HD-BRO126) as well as our "Old School" Sching saddle (HD-BRO125) for the rear fender! This completes the entire look of the bike! The frame cover also hides everything under the swing saddle so that neither screw points, dampers nor cables can be seen! The following two Surface variants are available for this front fender: - Paintable (Minimal painting effort 'Äì as perfect surface quality! The fender is delivered ready for painting and can basically be painted immediately!) - Glossy black (No longer needs to be painted - so you save the entire painting costs! Remove the protective film and the fender shines in glossy black!) THE PARTS CERTIFICATE IS IN THE TAB "DOWNLOADS" PROVIDED!!!

Complete original Cult-Werk rear conversion "Custom" V1 incl. mounting kit suitable for Harley-Davidson Touring models from 2014 onwards (Street Glide‚Ñ¢, Road Glide‚Ñ¢ & Road King‚Ñ¢ - also special versions as well as Ultra and Limited)! IMPORTANT: The rear conversion NOW comes with a wiring harness including a resistor for the correct flashing frequency! The conversion is therefore absolutely PLUG AND PLAY! The original license plate lighting must be used and connected to the wiring harness on the existing wires (red & black)! This Cult-Werk rear conversion is an ABS plastic part and is made using the latest technology 5-axis machining centers CNC milled! This ensures that these parts are of original equipment quality. No cheap GRP! You can have the plastic part painted immediately in a paintable version, which in turn is very cheap because it is a perfect surface! The complete conversion kit consists of a rear fender including a mounting kit as well as integrated LED tail and brake lights and indicators. The rear fender "Custom" V1 was visually very elaborately designed! The Cult-Werk rear is characterized by its very easy assembly. It is best to remove the side cases at the rear before assembly, then mount the ABS rear fender over the original metal fender and fasten it with the original seat screws! In addition, the supplied sheet metal holders are screwed on to attach the fender to the frame. Before final assembly of the ABS fender, the LED lights must be attached (these must be glued in - silicone or any other adhesive) and the wiring and laying of the cable harness must be carried out. The following two surface variants are available for this rear conversion: - Paintable (Minimal painting effort 'Äì as perfect surface quality! The fender is delivered ready for painting and can be √§Can be painted immediately!) - Glossy black (No longer needs to be painted - so you save the entire painting costs! Remove the protective film and the fender shines in glossy black!) The scope of delivery includes the following parts:- ABS rear fender- 2x LED tail and brake lights 2 in 1 (already on the wiring harness)- 2x LED Indicator (already on the wiring harness)- Mounting material- 2x holders for stiffening- Wiring harness including resistor and plug = Plug and Play THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!! !