Skip to main content

Average rating of 0 out of 5 stars

Create review

Rear conversion RACING (suitable for Harley-Davidson models: Breakout from 2013 - 2017)

Surface: paintable | Variation: 1-seater (incl. main seat made of genuine leather)
Complete racing rear conversion in the 1-seater or 2-seater version including ABS rear fender, mounting material, metal inner fender, lighting and seat!

Product information "Rear conversion RACING (suitable for Harley-Davidson models: Breakout from 2013 - 2017)"

Complete rear conversion "Racing" from Cult-Werk in the 1-seater or 2-seater version including ABS rear fender, mounting material, inner fender made of metal, lighting and genuine leather seat suitable for Harley-Davidson Breakout models from 2013 to 2017!

This Cult-Werk rear conversion is an ABS plastic part and is CNC milled on the most modern 5-axis machining centers! This ensures that this part is of original equipment quality. It's not a cheap GRP! The rear fender "Racing" was visually very elaborately designed and the rear is characterized by its very easy assembly. All you have to do is remove the original rear section and replace it with our metal inner fender. The lighting in the rear fender must then be wired using the lighting provided (the lighting units must be glued in - e.g. use silicone or other adhesive) and finally the ABS plastic part is placed on top and screwed to the metal inner fender!

The rear can be used for tires up to 280 mm and the narrow construction gives it a very beefy look. In the photos you can see a 280 tire that was mounted on a widened rim!

The matching seats (1-seater or with pillion pad) in the shape to match the rear are of course included. These are made of genuine leather (smooth outside & alcantara inside) in black with diamond stitching (black seams) and embossed Cult workmanship. Logo manufactured. It is simply exchanged for the original seat and is attached exactly like the original seat! If you have any questions, please contact us at any time!

IMPORTANT: The spring travel and the freedom of movement of the fender are Be sure to check and limit if necessary! The required suspension travel limiters are included in delivery!

The following two surface variants are available for this rear conversion:
- Can be painted (Minimal painting effort because the surface is perfect! The fender is delivered ready for painting and can basically be painted immediately!)
- Glossy black (No longer needs to be painted - so you save the entire painting costs! Remove the protective film and the fender shines in glossy black!)

Im The scope of delivery includes the following parts:
- ABS plastic rear fender
- Metal inner fender
- Lighting equipment
- Real leather seat and pillion pad (depending on selection)
- Mounting material
- 2x suspension travel limiters

THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!

GTú Approved

Cult-Werk

The team of Cult Werk, is composed of qualified, dedicated and dynamic employees and engineers, whose experience, in part over 25 years, creates a solid foundation for our company. Renowned companies from the vehicle and motorcycle sector rely on the quality of Cult Werk!
Manufacturer website

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Important note


Cult-werk.com and MEC Engineering GmbH, Cult-Werk® are not sponsored, associated, authorized, endorsed by, or affiliated in any way with Harley-Davidson Motor Company, LLC or Harley-Davidson Retail B.V. (www.harley-davidson.com). The Harley-Davidson name and, for example, the "Harley", "Sportster", "Softail" and "Nightster" marks are trademarks of Harley-Davidson Motor Company, LLC and all other products mentioned on this website are trademarks of their respective owners. Any mention of a brand name or other third party trademark is intended only to indicate that the Cult-Werk® units are intended as accessories or replacement parts for new/used Cult-Werk® units and is not an indication of an original product. Copyright / trademark infringements are not intended or implied. Translated with DeepL.com (free version)

Cult-werk.com and MEC Engineering GmbH, Cult-Werk® are not sponsored, associated, authorized, endorsed or affiliated in any way with Indian Motorcycle International, LLC (www.indianmotorcycle.com). The Indian name are trademarks of Indian Motorcycle International, LLC and all other products mentioned on this website are trademarks of their respective owners. Any mention of a third party brand name or other trademark is intended only to indicate that the Cult-Werk® units are intended as accessories or replacement parts and is not an indication of an original product. Copyright / trademark infringements are not intended or implied. Translated with DeepL.com (free version)

Accessories

License plate holder with TÜV (suitable for Harley-Davidson models: Breakout 2013 - 2017) License plate holder with TÜV (suitable for Harley-Davidson models: Breakout 2013 - 2017)

Average rating of 0 out of 5 stars

License plate holder with TÜV (suitable for Harley-Davidson models: Breakout 2013 - 2017)
Prod. no.: HD-BRO020-FR2
The Cult-Werk side license plate holder with GTú parts certificate for the listed license plate sizes and countries. Suitable for all Harley-Davidson Breakout models from 2013 to 2017 as well as suitable for Harley-Davidson Rocker models from 2008 to 2011 ! The shortest license plate holder on the market guarantees you a TOP look! The Cult-Werk license plate holder is made of high-quality steel, CNC lasered and then powder-coated black! Incl. LED license plate lighting with E-test mark. License plate size: W-180xH-200 mm (suitable for √ºfor Germany) or W-210xH-170 mm (suitable for √Austria) or W-180xH-140 mm (suitable for Switzerland) or W-170xH- 170 mm (suitable for Italy) orW-210xH-130 mm (variant 2 suitable for France) orW-210xH-140 mm (suitable for the Netherlands) < p class="MsoNormal">The installation is very simple, the license plate holder is screwed onto the rear axle. This requires a special nut with collar, which is of course included in the scope of delivery. Since the Cult-Werk license plate holder has an extra short mounting foot compared to other license plate holders available on the market, it is visually much more appealing! Scope of delivery : - 1x side license plate holder - 1x LED license plate light incl. E-test mark (pre-assembled!) - 1x special stainless steel nut with collar M24x1.5 - 4x screws including nuts for license plate attachment THE ASSEMBLY INSTRUCTIONS AND THE PARTS CERTIFICATE ARE AVAILABLE A LITTLE DOWN IN THE "AVAILABLE DOWNLOADS" SECTION!!!

€309.00*
License plate holder including insert frame with TÜV (suitable for Harley-Davidson models: Breakout 2013 - 2017) License plate holder including insert frame with TÜV (suitable for Harley-Davidson models: Breakout 2013 - 2017)

Average rating of 0 out of 5 stars

License plate holder including insert frame with TÜV (suitable for Harley-Davidson models: Breakout 2013 - 2017)
Prod. no.: HD-BRO020-A-F
The Cult-Werk side license plate holder with GTú parts certificate for the listed license plate sizes and countries as well as a milled plate including insert frame for the license plate!Suitable for all Harley-Davidson Breakout models from 2013 to 2017 and also suitable for Harley-Davidson< sup> Rocker models from 2008 to 2011! The shortest license plate holder on the market guarantees you a TOP look! The license plate holder from Cult-Werk is made of high-quality steel, CNC lasered and then powder-coated black! Incl. LED license plate lighting with E-test mark. License plate size:  W-180xH-200 mm (suitable for √ºfor Germany) orW-210xH-170 mm (suitable for √Austria) other sizes with slide-in frames will follow... Installation is very simple, the license plate holder is screwed onto the rear axle. This requires a special nut with collar, which is of course included in the scope of delivery. Since the Cult-Werk license plate holder has an extra short mounting foot compared to other license plate holders available on the market, it is visually much more appealing! Scope of delivery : - 1x side license plate holder incl. insert frame - 1x LED license plate light incl. E-test mark (pre-assembled!) - 1x special stainless steel nut with collar M24x1.5 - 2x grub screws for license plate attachment THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!! < /p>

€365.00*
License plate holder with TÜV (suitable for Harley-Davidson models: Breakout 2013 - 2017) License plate holder with TÜV (suitable for Harley-Davidson models: Breakout 2013 - 2017)

Average rating of 0 out of 5 stars

License plate holder with TÜV (suitable for Harley-Davidson models: Breakout 2013 - 2017)
Prod. no.: HD-BRO020-CH
The Cult-Werk side license plate holder with GTú parts certificate for the listed license plate sizes and countries. Suitable for all Harley-Davidson Breakout models from 2013 to 2017 as well as suitable for Harley-Davidson Rocker models from 2008 to 2011 ! The shortest license plate holder on the market guarantees you a TOP look! The Cult-Werk license plate holder is made of high-quality steel, CNC lasered and then powder-coated black! Incl. LED license plate lighting with E-test mark. License plate size: W-180xH-200 mm (suitable for √ºfor Germany) or W-210xH-170 mm (suitable for √Austria) or W-180xH-140 mm (suitable for Switzerland) or W-170xH- 170 mm (suitable for Italy) orW-210xH-130 mm (variant 2 suitable for France) orW-210xH-140 mm (suitable for the Netherlands) < p class="MsoNormal">The installation is very simple, the license plate holder is screwed onto the rear axle. This requires a special nut with collar, which is of course included in the scope of delivery. Since the Cult-Werk license plate holder has an extra short mounting foot compared to other license plate holders available on the market, it is visually much more appealing! Scope of delivery : - 1x side license plate holder - 1x LED license plate light incl. E-test mark (pre-assembled!) - 1x special stainless steel nut with collar M24x1.5 - 4x screws including nuts for license plate attachment THE ASSEMBLY INSTRUCTIONS AND THE PARTS CERTIFICATE ARE AVAILABLE A LITTLE DOWN IN THE "AVAILABLE DOWNLOADS" SECTION!!!

€309.00*
License plate holder with TÜV (suitable for Harley-Davidson models: Breakout 2013 - 2017) License plate holder with TÜV (suitable for Harley-Davidson models: Breakout 2013 - 2017)

Average rating of 0 out of 5 stars

License plate holder with TÜV (suitable for Harley-Davidson models: Breakout 2013 - 2017)
Prod. no.: HD-BRO020-NL
The Cult-Werk side license plate holder with GTú parts certificate for the listed license plate sizes and countries. Suitable for all Harley-Davidson Breakout models from 2013 to 2017 as well as suitable for Harley-Davidson Rocker models from 2008 to 2011 ! The shortest license plate holder on the market guarantees you a TOP look! The Cult-Werk license plate holder is made of high-quality steel, CNC lasered and then powder-coated black! Incl. LED license plate lighting with E-test mark. License plate size: W-180xH-200 mm (suitable for √ºfor Germany) or W-210xH-170 mm (suitable for √Austria) or W-180xH-140 mm (suitable for Switzerland) or W-170xH- 170 mm (suitable for Italy) orW-210xH-130 mm (variant 2 suitable for France) orW-210xH-140 mm (suitable for the Netherlands) < p class="MsoNormal">The installation is very simple, the license plate holder is screwed onto the rear axle. This requires a special nut with collar, which is of course included in the scope of delivery. Since the Cult-Werk license plate holder has an extra short mounting foot compared to other license plate holders available on the market, it is visually much more appealing! Scope of delivery : - 1x side license plate holder - 1x LED license plate light incl. E-test mark (pre-assembled!) - 1x special stainless steel nut with collar M24x1.5 - 4x screws including nuts for license plate attachment THE ASSEMBLY INSTRUCTIONS AND THE PARTS CERTIFICATE ARE AVAILABLE A LITTLE DOWN IN THE "AVAILABLE DOWNLOADS" SECTION!!!

€309.00*
License plate holder with TÜV (suitable for Harley-Davidson models: Breakout 2013 - 2017) License plate holder with TÜV (suitable for Harley-Davidson models: Breakout 2013 - 2017)

Average rating of 0 out of 5 stars

License plate holder with TÜV (suitable for Harley-Davidson models: Breakout 2013 - 2017)
Prod. no.: HD-BRO020-D
The Cult-Werk side license plate holder with GTú parts certificate for the listed license plate sizes and countries. Suitable for all Harley-Davidson Breakout models from 2013 to 2017 as well as suitable for Harley-Davidson Rocker models from 2008 to 2011 ! The shortest license plate holder on the market guarantees you a TOP look! The Cult-Werk license plate holder is made of high-quality steel, CNC lasered and then powder-coated black! Incl. LED license plate lighting with E-test mark. License plate size: W-180xH-200 mm (suitable for √ºfor Germany) or W-210xH-170 mm (suitable for √Austria) or W-180xH-140 mm (suitable for Switzerland) or W-170xH- 170 mm (suitable for Italy) orW-210xH-130 mm (variant 2 suitable for France) orW-210xH-140 mm (suitable for the Netherlands) < p class="MsoNormal">The installation is very simple, the license plate holder is screwed onto the rear axle. This requires a special nut with collar, which is of course included in the scope of delivery. Since the Cult-Werk license plate holder has an extra short mounting foot compared to other license plate holders available on the market, it is visually much more appealing! Scope of delivery : - 1x side license plate holder - 1x LED license plate light incl. E-test mark (pre-assembled!) - 1x special stainless steel nut with collar M24x1.5 - 4x screws including nuts for license plate attachment THE ASSEMBLY INSTRUCTIONS AND THE PARTS CERTIFICATE ARE AVAILABLE A LITTLE DOWN IN THE "AVAILABLE DOWNLOADS" SECTION!!!

€309.00*
License plate holder with TÜV (suitable for Harley-Davidson models: Breakout 2013 - 2017) License plate holder with TÜV (suitable for Harley-Davidson models: Breakout 2013 - 2017)

Average rating of 0 out of 5 stars

License plate holder with TÜV (suitable for Harley-Davidson models: Breakout 2013 - 2017)
Prod. no.: HD-BRO020-A
The Cult-Werk side license plate holder with GTú parts certificate for the listed license plate sizes and countries. Suitable for all Harley-Davidson Breakout models from 2013 to 2017 as well as suitable for Harley-Davidson Rocker models from 2008 to 2011 ! The shortest license plate holder on the market guarantees you a TOP look! The Cult-Werk license plate holder is made of high-quality steel, CNC lasered and then powder-coated black! Incl. LED license plate lighting with E-test mark. License plate size: W-180xH-200 mm (suitable for √ºfor Germany) or W-210xH-170 mm (suitable for √Austria) or W-180xH-140 mm (suitable for Switzerland) or W-170xH- 170 mm (suitable for Italy) orW-210xH-130 mm (variant 2 suitable for France) orW-210xH-140 mm (suitable for the Netherlands) < p class="MsoNormal">The installation is very simple, the license plate holder is screwed onto the rear axle. This requires a special nut with collar, which is of course included in the scope of delivery. Since the Cult-Werk license plate holder has an extra short mounting foot compared to other license plate holders available on the market, it is visually much more appealing! Scope of delivery : - 1x side license plate holder - 1x LED license plate light incl. E-test mark (pre-assembled!) - 1x special stainless steel nut with collar M24x1.5 - 4x screws including nuts for license plate attachment THE ASSEMBLY INSTRUCTIONS AND THE PARTS CERTIFICATE ARE AVAILABLE A LITTLE DOWN IN THE "AVAILABLE DOWNLOADS" SECTION!!!

€309.00*
License plate holder with TÜV (suitable for Harley-Davidson models: Breakout 2013 - 2017) License plate holder with TÜV (suitable for Harley-Davidson models: Breakout 2013 - 2017)

Average rating of 0 out of 5 stars

License plate holder with TÜV (suitable for Harley-Davidson models: Breakout 2013 - 2017)
Prod. no.: HD-BRO020-I
The Cult-Werk side license plate holder with GTú parts certificate for the listed license plate sizes and countries. Suitable for all Harley-Davidson Breakout models from 2013 to 2017 as well as suitable for Harley-Davidson Rocker models from 2008 to 2011 ! The shortest license plate holder on the market guarantees you a TOP look! The Cult-Werk license plate holder is made of high-quality steel, CNC lasered and then powder-coated black! Incl. LED license plate lighting with E-test mark. License plate size: W-180xH-200 mm (suitable for √ºfor Germany) or W-210xH-170 mm (suitable for √Austria) or W-180xH-140 mm (suitable for Switzerland) or W-170xH- 170 mm (suitable for Italy) orW-210xH-130 mm (variant 2 suitable for France) orW-210xH-140 mm (suitable for the Netherlands) < p class="MsoNormal">The installation is very simple, the license plate holder is screwed onto the rear axle. This requires a special nut with collar, which is of course included in the scope of delivery. Since the Cult-Werk license plate holder has an extra short mounting foot compared to other license plate holders available on the market, it is visually much more appealing! Scope of delivery : - 1x side license plate holder - 1x LED license plate light incl. E-test mark (pre-assembled!) - 1x special stainless steel nut with collar M24x1.5 - 4x screws including nuts for license plate attachment THE ASSEMBLY INSTRUCTIONS AND THE PARTS CERTIFICATE ARE AVAILABLE A LITTLE DOWN IN THE "AVAILABLE DOWNLOADS" SECTION!!!

€309.00*
License plate holder including insert frame with TÜV (suitable for Harley-Davidson models: Breakout 2013 - 2017) License plate holder including insert frame with TÜV (suitable for Harley-Davidson models: Breakout 2013 - 2017)

Average rating of 0 out of 5 stars

License plate holder including insert frame with TÜV (suitable for Harley-Davidson models: Breakout 2013 - 2017)
Prod. no.: HD-BRO020-D-F
The Cult-Werk side license plate holder with GTú parts certificate for the listed license plate sizes and countries as well as a milled plate including insert frame for the license plate!Suitable for all Harley-Davidson Breakout models from 2013 to 2017 and also suitable for Harley-Davidson< sup> Rocker models from 2008 to 2011! The shortest license plate holder on the market guarantees you a TOP look! The license plate holder from Cult-Werk is made of high-quality steel, CNC lasered and then powder-coated black! Incl. LED license plate lighting with E-test mark. License plate size:  W-180xH-200 mm (suitable for √ºfor Germany) orW-210xH-170 mm (suitable for √Austria) other sizes with slide-in frames will follow... Installation is very simple, the license plate holder is screwed onto the rear axle. This requires a special nut with collar, which is of course included in the scope of delivery. Since the Cult-Werk license plate holder has an extra short mounting foot compared to other license plate holders available on the market, it is visually much more appealing! Scope of delivery : - 1x side license plate holder incl. insert frame - 1x LED license plate light incl. E-test mark (pre-assembled!) - 1x special stainless steel nut with collar M24x1.5 - 2x grub screws for license plate attachment THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!! < /p>

€365.00*