Rear conversion GT (suitable for Harley-Davidson models: VRSC V-Rod from 2002 - 2006)

Complete rear conversion "Racing" from Cult-Werk with mounting kit and inner fender made of metal + seat "Racing" ready covered for V Rod and Night Rod, NRS and Muscle. This Cult-Werk rear conversion is an ABS plastic part and is CNC milled on the most modern 5-axis machining centers! This ensures that these parts are of original equipment quality. No cheap GRP! You can have the plastic parts painted immediately, which is very cheap because the surface is perfect and no preparation or reworking of the parts is required! The complete conversion kit consists of a short rear fender including mounting kit and an inner fender made of metal, as well as a ready-covered seat. The rear fender "Racing" was visually very elaborately designed! The Cult Werk Heck is characterized by its very easy assembly. Just unscrew the original rear and remove the metal inner fender. Then mount the Cult Werk metal inner fender, screw on the rear fender and clip in the seat - done! It doesn't have to be cut, drilled or adjusted!!! The entire rear conversion can be carried out by anyone in about 2 hours. The rear can be used for tires up to 280 mm. Very beefy look, because the rear was designed to be tailored, so the 240 tire appears very beefy! In the photos you can see a 260 tire on the original rim. The matching seat (1-seater, black) in the shape to match the rear (as shown) is included in the scope of delivery . It is simply exchanged for the original seat and is attached exactly like the original seat! All functions remain fully intact! If you have any questions, please contact us at any time! For the VROD Muscle, however, the conversion only fits in conjunction with our airbox cover. THE ASSEMBLY INSTRUCTIONS AND THE PARTS APPROVAL WILL BE AVAILABLE IN THE DOWNLOADS TAB!!!

Complete rear conversion "Racing" in the 1-seater or 2-seater version including ABS rear fender, mounting material, inner fender made of metal, wiring harness and genuine leather seat suitable for Harley-Davidson Breakout models from 2018 onwards! This Cult-Werk rear conversion is an ABS plastic part and is CNC milled on the most modern 5-axis machining centers! This ensures that this part is of original equipment quality. It's not a cheap GRP! The rear fender "Racing" was visually very elaborately designed and the rear is characterized by its very easy assembly. All you have to do is remove the original rear section and replace it with our metal inner fender. The lighting in the rear fender must then be wired using the wiring harness provided (the lighting units must be glued in - e.g. use silicone or other adhesive) and finally the ABS plastic part is placed on top and screwed to the metal inner fender! The rear can be used for tires up to 280 mm and the narrow construction gives it a very beefy look. In the photos you can see a 280 tire that was mounted on a widened rim! The matching seats (main seat + pillion pad) in the shape to match the rear are of course included. These are made of genuine leather (smooth outside & alcantara inside) in black with diamond stitching (black seams) and embossed Cult workmanship. Logo manufactured. It is simply exchanged for the original seat and is attached exactly like the original seat! If you have any questions, please contact us at any time! IMPORTANT: The spring travel and the freedom of movement of the fender must be checked and if necessary limit! The required suspension travel limiters are included in delivery! The following two surface variants are available for this rear conversion: - Can be painted (Minimal painting effort because the surface is perfect! The fender is delivered ready for painting and can basically be painted immediately!) - Glossy black (no longer required painted - so you save the entire painting costs! Remove the protective film and the fender shines in glossy black!) The scope of delivery includes the following parts Included: - ABS plastic rear fender - Metal inner fender - Wiring harness including lighting for "plug and play" connection - Genuine leather seat and pillion pad (depending on selection) - Mounting material- 2x spring travel limiters THE INSTALLATION INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!

Complete rear conversion "Racing" in the 1-seater or 2-seater version including ABS rear fender, mounting material, inner fender made of metal, wiring harness and genuine leather seat suitable for Harley-Davidson Breakout models from 2023 onwards! This Cult-Werk rear conversion is an ABS plastic part and is CNC milled on the most modern 5-axis machining centers! This ensures that this part is of original equipment quality. It's not a cheap GRP! The rear fender "Racing" was visually very elaborately designed and the rear is characterized by its very easy assembly. All you have to do is remove the original rear section and replace it with our metal inner fender. The lighting in the rear fender must then be wired using the wiring harness provided (the lighting units must be glued in - e.g. use silicone or other adhesive) and finally the ABS plastic part is placed on top and screwed to the metal inner fender! The rear can be used for tires up to 280 mm and the narrow construction gives it a very beefy look. In the photos you can see a 280 tire that was mounted on a widened rim! The matching seats (main seat + pillion pad) in the shape to match the rear are of course included. These are made of genuine leather (smooth outside & alcantara inside) in black with diamond stitching (black seams) and embossed Cult workmanship. Logo manufactured. It is simply exchanged for the original seat and is attached exactly like the original seat! If you have any questions, please contact us at any time! IMPORTANT: The spring travel and the freedom of movement of the fender must be checked and if necessary limit! The required suspension travel limiters are included in delivery! The following two surface variants are available for this rear conversion: - Can be painted (Minimal painting effort because the surface is perfect! The fender is delivered ready for painting and can basically be painted immediately!) - Glossy black (no longer required painted - so you save the entire painting costs! Remove the protective film and the fender shines in glossy black!) The scope of delivery includes the following parts Included: - ABS plastic rear fender - Metal inner fender - Wiring harness including lighting for "plug and play" connection - Genuine leather seat and pillion pad (depending on selection) - Mounting material- 2x spring travel limiters THE INSTALLATION INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!

The rear conversion "GT" from Cult-Werk suitable for all Harley-Davidson V-Rod & Night Rod Special models from the year of manufacture 2007 to the last year of manufacture 2017. It is delivered including a metal inner fender as well as all mounting material and also an associated seat shell!