Rear conversion CUSTOM V2 (suitable for Harley-Davidson models: Touring from 2014)

Surface: paintable

Complete Cult-Werk rear conversion "Custom" including mounting kit suitable for Harley-Davidson Touring models from 2014 (Street Glide, Road Glide...

€1,380.00*

Content: 1 Stück

Prices incl. VAT plus shipping costs

Surface

black glossy

paintable

Product number: HD-TOU022

EAN: 9120083682816

Weight: 1.83 kg

Product information "Rear conversion CUSTOM V2 (suitable for Harley-Davidson models: Touring from 2014)"

Complete Cult-Werk rear conversion "Custom" including mounting kit suitable for Harley-Davidson Touring models from 2014 (Street Glide, Road Glide & Road King - also special Versions as well as Ultra and Limited)!

IMPORTANT: The rear conversion NOW comes with a wiring harness including a resistor for the correct flashing frequency! The conversion is therefore absolutely PLUG AND PLAY!
The original license plate lighting must be used and connected to the wiring harness on the existing wires (red & black)!

This one Cult-Werk rear conversion is an ABS plastic part and is CNC milled on the most modern 5-axis machining centers! This ensures that these parts are of original equipment quality. No cheap GRP! You can have the plastic part painted immediately in a paintable version, which in turn is very cheap because it is a perfect surface! The complete conversion kit consists of a rear fender including a mounting kit as well as integrated LED tail and brake lights and indicators.

The rear fender "Custom" V2 was visually very elaborately designed! The Cult-Werk rear is characterized by its very easy assembly. It is best to remove the side cases at the rear before assembly, then mount the ABS rear fender over the original metal fender and fasten it with the original seat screws! In addition, the supplied sheet metal holders are screwed on to attach the fender to the frame. Before final assembly of the ABS fender, the LED lights must be attached (these must be glued in - silicone or any other adhesive) and the wiring and laying of the cable harness must be carried out.

The following two surface variants are available for this rear conversion:
- Paintable (Minimal painting effort 'Äì as perfect surface quality! The fender is delivered ready for painting and can basically √§Can be painted immediately!)
- Glossy black (No longer needs to be painted - so you save the entire painting costs! Remove the protective film and the fender shines in glossy black!)

The scope of delivery includes the following parts:
- ABS rear fender
- 6x LED tail and brake lights 2 in 1 (already on the wiring harness)
- 4x LED Indicator (already on the wiring harness)
- Mounting material
- 2x holders for stiffening
- Wiring harness incl. resistor and plug = Plug and Play

THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!

GTü Approved

Cult-Werk

The team of Cult Werk, is composed of qualified, dedicated and dynamic employees and engineers, whose experience, in part over 25 years, creates a solid foundation for our company. Renowned companies from the vehicle and motorcycle sector rely on the quality of Cult Werk!

Manufacturer website

1 of 1 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Sort by

3 January 2022 16:46

Immer wieder

Habe mir das Heck letztes Jahr gekauft Schaut sau geil aus, Verpackung, Verarbeitung, Service Tip Top. Immer wieder

Important note

Cult-werk.com and MEC Engineering GmbH, Cult-Werk® are not sponsored, associated, authorized, endorsed by, or affiliated in any way with Harley-Davidson Motor Company, LLC or Harley-Davidson Retail B.V. (www.harley-davidson.com). The Harley-Davidson name and, for example, the "Harley", "Sportster", "Softail" and "Nightster" marks are trademarks of Harley-Davidson Motor Company, LLC and all other products mentioned on this website are trademarks of their respective owners. Any mention of a brand name or other third party trademark is intended only to indicate that the Cult-Werk® units are intended as accessories or replacement parts for new/used Cult-Werk® units and is not an indication of an original product. Copyright / trademark infringements are not intended or implied. Translated with DeepL.com (free version)

Cult-werk.com and MEC Engineering GmbH, Cult-Werk® are not sponsored, associated, authorized, endorsed or affiliated in any way with Indian Motorcycle International, LLC (www.indianmotorcycle.com). The Indian name are trademarks of Indian Motorcycle International, LLC and all other products mentioned on this website are trademarks of their respective owners. Any mention of a third party brand name or other trademark is intended only to indicate that the Cult-Werk® units are intended as accessories or replacement parts and is not an indication of an original product. Copyright / trademark infringements are not intended or implied. Translated with DeepL.com (free version)

Simular Items

Rear conversion CUSTOM V1 (suitable for Harley-Davidson models: Touring from 2014)

Prod. no.: HD-TOU020

Complete original Cult-Werk rear conversion "Custom" V1 incl. mounting kit suitable for Harley-Davidson Touring models from 2014 onwards (Street Glide‚Ñ¢, Road Glide‚Ñ¢ & Road King‚Ñ¢ - also special versions as well as Ultra and Limited)! IMPORTANT: The rear conversion NOW comes with a wiring harness including a resistor for the correct flashing frequency! The conversion is therefore absolutely PLUG AND PLAY! The original license plate lighting must be used and connected to the wiring harness on the existing wires (red & black)! This Cult-Werk rear conversion is an ABS plastic part and is made using the latest technology 5-axis machining centers CNC milled! This ensures that these parts are of original equipment quality. No cheap GRP! You can have the plastic part painted immediately in a paintable version, which in turn is very cheap because it is a perfect surface! The complete conversion kit consists of a rear fender including a mounting kit as well as integrated LED tail and brake lights and indicators. The rear fender "Custom" V1 was visually very elaborately designed! The Cult-Werk rear is characterized by its very easy assembly. It is best to remove the side cases at the rear before assembly, then mount the ABS rear fender over the original metal fender and fasten it with the original seat screws! In addition, the supplied sheet metal holders are screwed on to attach the fender to the frame. Before final assembly of the ABS fender, the LED lights must be attached (these must be glued in - silicone or any other adhesive) and the wiring and laying of the cable harness must be carried out. The following two surface variants are available for this rear conversion: - Paintable (Minimal painting effort 'Äì as perfect surface quality! The fender is delivered ready for painting and can be √§Can be painted immediately!) - Glossy black (No longer needs to be painted - so you save the entire painting costs! Remove the protective film and the fender shines in glossy black!) The scope of delivery includes the following parts:- ABS rear fender- 2x LED tail and brake lights 2 in 1 (already on the wiring harness)- 2x LED Indicator (already on the wiring harness)- Mounting material- 2x holders for stiffening- Wiring harness including resistor and plug = Plug and Play THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!! !

€1,059.00*

Headlight mask BAD LOOK (suitable for Harley-Davidson models: Road Glide from 2015)

Prod. no.: HD-TOU027

This Cult-Werk headlight mask "Bad Look" is suitable for all Harley-Davidson Touring Road Glide‚Ñ¢ models from 2015 (Road Glide‚Ñ¢, Road Glide‚Ñ¢ Special, Road Glide‚Ñ¢ Ultra & CVO‚Ñ¢ Road Glide‚Ñ¢). The mask is an ABS plastic part and is milled on the most modern 5-axis CNC machining centers! This ensures that these parts are of original equipment quality. No cheap GRP! You can have the plastic parts painted immediately, which in turn saves costs because it is a perfect surface and no preparation or reworking of the parts is required! To assemble the headlight mask: This basically gets stuck in the Fehring by itself. Nevertheless, a high-quality assembly adhesive is included with which the mask is glued to the headlight at four adhesive points. Important: The glue should dry for 12 hours at room temperature (see application images in the product images)! The following two surface variants are available for this headlight mask: - Can be painted (Minimal painting effort because the surface is perfect! The mask is delivered ready for painting and can basically be painted immediately!) - Glossy black (no longer needs to be painted - so you save the entire painting costs! Remove the protective film and the mask shines in glossy black!) THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!

€109.00* €269.00*

Brake and clutch cylinder cover RACING (suitable for Harley-Davidson models: Touring from 2014 with hydraulic clutch)

Details

Brake and clutch cylinder cover RACING (suitable for Harley-Davidson models: Touring from 2014 with hydraulic clutch)

Prod. no.: HD-TOU038

The Cult-Werk clutch and brake cylinder cover suitable forHarley-Davidson Touring models from 2014 with hydraulic Clutch!The covers are milled from aluminum on the most modern 5-axis CNC machines and replace the original, somewhat boring covers. Easy to assemble: Loosen the 2 screws and replace them with the Cult-Werk lid. The matching screws in black are of course included. The original seal is still used. Of course, the inside of the cover was also CNC milled, which means the inside corresponds to the original cover because there are guides for it √ºfrozen for the seal, which are still needed! The covers are approx. 25mm higher than the original covers and were milled very elaborately. Different levels, recesses and different radii make them appear extremely 3-dimensional and thus give your Harley a more aggressive and high-quality look!

Content: 2 Stück (€107.50* / 1 Stück)

€215.00*

Tip

Details

License Plate Center V2, without 3in1 Lighting (suitable for Harley-Davidson models: Low Rider & Heritage Classic from 2018)

Prod. no.: HD-BRO156-AM

Original Cult-Werk license plate center V2 suitable for all Harley-Davidson Low Rider models (Low Rider, Low Rider S & Low Rider ST) from model year 2018 and Harley-Davidson Heritage Classic models from 2018! License plate size: W-210xH-170 mm (suitable for standard Austrian license plates) B-180xH-200 mm (suitable for standard license plates Germany) The Cult-Werk slide-in frame V1 gives your Harley-Davidson a clean and cool look! This is a 100% custom-fit aftermarket product which can be replaced with the original lighting unit on the fender and the license plate without any adjustments! All holes and millings are milled on state-of-the-art 5-axis CNC machining centers, so that the frame only needs to be replaced with the supplied mounting material! Included in delivery: - 1x milled slide-in frame (matt black) - 1x LED license plate light incl. E-mark and milled mount - 1x bracket for perfect mounting on the rear fender - Mounting material

€399.00*

Tip

Details

License Plate Center V1, without 3in1 Lighting (suitable for Harley-Davidson models: Low Rider & Heritage Classic from 2018)

Prod. no.: HD-BRO155-AM

Original Cult-Werk license plate center V1 suitable for all Harley-Davidson Low Rider models (Low Rider, Low Rider S & Low Rider ST) from model year 2018 and Harley-Davidson Heritage Classic models from 2018! License plate size: W-210xH-170 mm (suitable for standard Austrian license plates) B-180xH-200 mm (suitable for standard license plates Germany) The Cult-Werk slide-in frame V1 gives your Harley-Davidson a clean and cool look! This is a 100% custom-fit aftermarket product which can be replaced with the original lighting unit on the fender and the license plate without any adjustments! All holes and millings are milled on state-of-the-art 5-axis CNC machining centers, so that the frame only needs to be replaced with the supplied mounting material! Included in delivery: - 1x milled slide-in frame (matt black) - 1x LED license plate light incl. E-mark and milled mount - 1x bracket for perfect mounting on the rear fender - Mounting material

€379.00*

Tip

License Plate Center V2 (suitable for Harley-Davidson models: CVO from 2023 & Street Glide + Road Glide from 2024)

Prod. no.: HD-TOU046-D

Original Cult-Werk license plate in the middle suitable for all Harley-Davidson CVO models from year 2023 as well as Harley-Davidson Street Glide & Road Glide from year of manufacture 2024! License plate size: W-180xH-200 mm ( suitable for standard license plates Germany)The Cult-Werk plate gives your Harley-Davidson a clean and cool look! This is a 100% custom-fit aftermarket product that can be replaced with the original license plate light and license plate plate without any adjustments! All holes and millings are milled on state-of-the-art 5-axis CNC machining centers, so that the plate only needs to be replaced with the included mounting material! The plate comes with contour milling to pick up the milled elements of the CVO models! Included in delivery:- 1x milled license plate holder (glossy black)- 1x LED license plate lighting incl. E-test mark and greatest recording - Mounting material

€299.00*

LED indicator set CLEAN STYLE (suitable for Harley-Davidson models: Street Glide from 2014, original halogen)

Prod. no.: HD-TOU044

Suitable for all Harley-Davidson Touring Street Glide models (Street Glide & Street Glide Special) from 2014 onwards! IMPORTANT: THIS SET FITS ALL MODELS THAT HAVE ORIGINAL HALOGEN LIGHTING EQUIPMENT!The indicator set NOW comes with a wiring harness including resistor f √ºr the right flashing frequency! The set is therefore absolutely PLUG AND PLAY! The Cult-Werk indicator set gives your motorcycle a clean and cool look! This is a 100% precisely fitting ABS plastic part, NOT a cheap GRP and therefore offers a 100% perfect fit! No adjustment work necessary! All holes and millings are milled on the most modern 5-axis CNC machining centers, so that the indicator set only needs to be exchanged for the original. Original fit - new design. Included in delivery:- 2x ABS plastic indicator holder (glossy black) - 2x LED indicators including E-test mark and therefore registration-free!- Wiring harness including resistor and plug = Plug and Play

Content: 2 Stück (€124.50* / 1 Stück)

€249.00*

Tip

Details

License Plate Center V2, incl. 3in1 Lighting (suitable for Harley-Davidson models: Low Rider & Heritage Classic from 2018)

Prod. no.: HD-BRO154-AM

€519.00*

Tip

License Plate Center V2 (suitable for Harley-Davidson models: CVO from 2023 & Street Glide + Road Glide from 2024)

Prod. no.: HD-TOU045-D

Original Cult-Werk license plate in the middle suitable for all Harley-Davidson CVO models from year 2023 as well as Harley-Davidson Street Glide & Road Glide from year of manufacture 2024!V1 - All Black variant V2 - Black with contour milling License plate size: W-180xH-200 mm ( suitable for standard license plates Germany)The Cult-Werk plate gives your Harley-Davidson a clean and cool look! This is a 100% custom-fit aftermarket product that can be replaced with the original license plate light and license plate plate without any adjustments! All holes and millings are milled on state-of-the-art 5-axis CNC machining centers, so that the plate only needs to be replaced with the included mounting material! Included in delivery:- 1x black license plate holder (glossy black)- 1x LED license plate lighting incl. E-test mark and greatest recording - Mounting material

€279.00*

Tip

Details

License Plate Center V1, incl. 3in1 Lighting (suitable for Harley-Davidson models: Low Rider & Heritage Classic from 2018)

Prod. no.: HD-BRO153-AM

Original Cult-Werk license plate center V1 suitable for all Harley-Davidson Low Rider models (Low Rider, Low Rider S & Low Rider ST) from model year 2018 and Harley-Davidson Heritage Classic models from 2018! License plate size: W-210xH-170 mm (suitable for standard Austrian license plates) B-180xH-200 mm (suitable for standard Germany license plates) The Cult-Werk slide-in frame V1 gives your Harley-Davidson a clean and cool look! This is a 100% custom-fit aftermarket product which can be replaced with the original lighting unit on the fender and the license plate without any adjustments! All holes and millings are milled on state-of-the-art 5-axis CNC machining centers, so that the frame only needs to be replaced with the supplied mounting material! Included in delivery: - 1x milled slide-in frame (matt black) - 1x LED license plate light incl. E-mark and milled mount - 1x bracket for perfect mounting on the rear fender - Mounting material

€499.00*

Front fender CUSTOM V1 (suitable for Harley-Davidson models: Touring from 2014)

Prod. no.: HD-TOU009

The front fender from Cult-Werk suitable for Harley-Davidson Touring models from 2014 onwards gives a sportier look. It is shorter, narrower and clears the view of the front wheel. The part gives your motorcycle a clean and cool look! This front fender is a 100% perfect fit ABS plastic part, NOT a cheap GRP and therefore offers a 100% perfect fit! No adjustment work necessary! All holes and millings are milled on the most modern 5-axis CNC machining centers, so that the fender only needs to be exchanged for the original fender. The fender is top-notch, fits perfectly and provides a clear view of the front wheel. Original fit - new design. The following two surface variants are available for this fender: - Can be painted (minimal painting effort - perfect Surface quality! The fender is delivered ready for painting and can basically be painted immediately!) - Glossy black (No longer needs to be painted - so you save the entire painting costs! Remove the protective film and the fender shines in glossy black!) In addition, the fenders are available for different inch sizes! After you have decided on a surface variant, select the desired size. THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB PROVIDED!!!

€266.25* €355.00*