With this 2-piece fork cover kit from Cult-Werk you can hide the upper fork tubes between the fork clamps. This means that the chrome-plated fork tubes are covered and the entire fork appears beefier and completely black. Suitable for all Harley-Davidson V-Rod models. The covers are attached using hidden threaded pins and thus center themselves on the fork tubes. This ensures that the covers are held securely. To ensure that the gaps between the covers and the fork bridges are exactly parallel, the covers were provided with the same bevels as the fork bridges. Our covers are made of high-quality aluminum and are milled on state-of-the-art 5-axis machining centers and then powder-coated glossy black. This guarantees absolutely the highest quality! Assembly is very simple, the cover is simply pushed over the fork tube and screwed tight. All parts required for assembly are included in the kit!

The rear axle covers from Cult-Werk in black suitable for all Harley-Davidson V-Rod + Night Rod Special + Street Rod + Muscle models. These rear axle covers hide the wheel nut on the right and the thru axle on the left side of the rear rim. The covers are attached with the lower shock absorber screw. Guarantees a secure hold and a clean look. Make the swingarm appear as if it were cast from a single piece. Delivery includes: 1 set (2 pieces) rear axle covers, glossy black THE PARTS REPORT WILL BE AVAILABLE IN THE "DOWNLOADS" TAB!!!

The swingarm covers (left + right) in black from Cult Werk, suitable for all Harley-Davidson V-Rod, Muscle and Street Rod models. These covers hide the swing axle in the swing arm and thus ensure a clean and clean look. For models of this year, a curved cover is supplied for the left side because the nut of the swing axle protrudes slightly over the swing arm. Perfect fit and absolutely highest quality! Our covers are made of high-quality aluminum and are milled on the most modern 5-axis machining centers and then glossy black powder coated. Very easy to assemble, the covers are just plugged into the swing arm, center themselves and are fixed using an O-ring. Delivery included: 2 pieces

With this 2-piece fork cover kit from Cult-Werk you can hide the upper fork tubes between the fork clamps. This means that the chrome-plated fork tubes are covered and the entire fork appears beefier and completely black. Suitable for all Harley-Davidson V-Rod, Night Rod and Night Rod Special models! The covers are attached using hidden threaded pins and thus center themselves on the fork tubes. This ensures that the covers are held securely. To ensure that the gaps between the covers and the fork bridges are exactly parallel, the covers were provided with the same bevels as the fork bridges. Our covers are made of high-quality aluminum and are milled on state-of-the-art 5-axis machining centers and then powder-coated glossy black. This guarantees absolutely the highest quality! Installation is very easy, the cover is just pushed over the fork tube and screwed tight.

This cover from Cult-Werk covers the fork tubes (chrome) below the fork bridge. Excluded on the inside to ensure freedom of movement on the original fender (during compression). Suitable for all Harley-Davidson V-Rod, Night Rod and Night Rod Special models. This lower fork cover is also suitable for the original front fender. There is no need to purchase a new, matching front fender. UNIQUE ON THE MARKET! Scope of delivery: 1 set of shock absorber covers at the bottom, also suitable for the original fender, CNC milled, aluminum, shiny black §nd powder coated.

The Cult-Werk fork caps cover the ends of the fork tubes above the fork clamp and are securely fastened with a hidden threaded pin. These caps are suitable for Harley-Davidson V-Rod / Night Rod models from 2002 to 2011, Breakout models from 2013 to 2017 as well as Dyna models from 2007 to 2017! Our covers are made of high-quality aluminum and are milled on state-of-the-art 5-axis machining centers and then powder-coated glossy black. This ensures absolutely the highest quality! 1 set = 2 pieces

With this 2-piece fork cover kit from Cult-Werk you can hide the chrome-plated fork tubes below the fork clamp. This means that the chrome-plated fork tubes are covered and the entire fork appears beefier and completely black. Suitable for all Harley-Davidson V-Rod, Night Rod Special and Muscle models. The covers are screwed onto the front fender and the brake caliper. This ensures that the covers are held securely. Of course, the standard fender can continue to be used.  Made of high-quality aluminum. Milled on the most modern 5-axis machining centers. Glossy black powder-coated!

With this 6-piece fork cover kit from Cult-Werk you can cover the fork tubes above, between and below the fork clamps. This covers the chrome-plated fork tubes and the entire fork appears beefier and completely black! This 6-piece fork cover kit can be used with the original front fender or custom fender. The individual covers are attached using hidden threaded pins and thus center themselves on the fork tubes. This ensures that the covers are held securely. To ensure that the gaps between the covers and the fork bridges are exactly parallel, the covers were provided with the same bevels as the fork bridges. Our covers are made of high-quality aluminum and are milled on state-of-the-art 5-axis machining centers and then powder-coated glossy black. This guarantees absolutely the highest quality! Installation is very simple, the upper and lower covers are simply pushed over the fork tube and screwed tight. On the inside of the lower cover there is a cutout for access to the fender and is therefore hardly visible. Material: aluminum/glossy black powder-coated Scope of delivery: - 2x fork caps - 2x fork covers above - 2x fork covers below

With this 2-piece fork cover kit from Cult-Werk you can hide the lower fork tubes below the fork bridge. This covers the chrome-plated fork tubes and the entire fork appears beefier and completely black! Suitable for all Harley-Davidson V-Rod models. The covers are attached using hidden threaded pins and thus center themselves on the fork tubes. This ensures that the covers are held securely. So that the gaps between the covers and the fork bridge are exactly parallel, the covers were provided with the same bevels as the fork bridge. Our covers are made of high-quality aluminum and are milled on state-of-the-art 5-axis machining centers and then powder-coated glossy black. This ensures absolutely the highest quality! Installation is very simple, the cover is just pushed over the fork tube and screwed tight. This Gable Cover Kit is suitable for the original front fender and for custom fenders. All parts required for assembly are included!

The Cult-Werk radiator cover "Racing" made in 3D design gives all V-Rod/Night Rod and Muscle models a sportier look! This radiator cover is a 100% precisely fitting ABS plastic part, NOT a cheap GRP! The radiator cover therefore offers a 100% perfect fit! No adjustment work necessary! Minimal painting effort due to perfect surface quality. All holes and millings are milled on the most modern 5-axis CNC machining centers. You will receive a metal holder onto which the cooler and the voltage regulator are screwed. A holder for the brake fluid reservoir is also included. Everything stays original! No need to convert the brake fluid reservoir! Side covers are also included so that everything is neatly covered and the cooler is not visible. Grilles for the air inlets are also included in the scope of delivery! The entire assembly takes a maximum of 20 minutes! THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB PLACED!!!

The Cult-Werk fork cover kit 6 pieces in black  is suitable for all Harley-Davidson V-Rod & Night Rod models also with standard front fender. With this 6-piece fork cover kit you can cover the fork tubes above, between and below the fork clamps. This covers the chrome-plated fork tubes and the entire fork appears beefier and completely black! This 6-piece fork cover kit can be used with the original front fender or custom fender. The individual covers are attached using hidden threaded pins and thus center themselves on the fork tubes. This ensures that the covers are held securely. To ensure that the gaps between the covers and the fork bridges are exactly parallel, the covers were provided with the same bevels as the fork bridges. Our covers are made of high-quality aluminum and are milled on state-of-the-art 5-axis machining centers and then powder-coated glossy black. This guarantees absolutely the highest quality! Installation is very simple, the upper and lower covers are simply pushed over the fork tube and screwed tight. On the inside of the lower cover there is a cutout for access to the fender and is therefore hardly visible. All parts required for assembly are included in the kit! This 6-piece fork cover kit can be used with the original front fender or custom fender. Material: aluminum/glossy black powder-coated Scope of delivery: - 2x fork caps - 2x fork covers above - 2 x fork covers below - mounting material

The Cult-Werk clutch and brake cylinder cover suitable for Harley-Davidson V-Rod, Night Rod and Night Rod Special models from the year of construction 2007 to 2017! The lids are milled from aluminum on the most modern 5-axis CNC machines and replace the original, somewhat boring lids. Easy to assemble: Loosen the 2 screws and replace them with the Cult-Werk lid. The matching screws in black are of course included. The original seal is still used. Of course, the inside of the cover was also CNC milled, which means the inside corresponds to the original cover because there are guides for it üfrozen for the seal, which are still needed! The lids are approx. 25mm higher than the original lids and were milled very elaborately. Different levels, depressions and different radii make them appear extremely 3-dimensional and thus give your motorcycle a more aggressive and high-quality look!

These axle covers from Cult-Werk are suitable for all Harley-Davidson Softail models from 2008 to 2017, V-Rod / Night Rod & Muscle models from 2002 to 2017, Touring models from 2008 and Dyna models from 2007 to 2017 and cover the wheel nut on one side and the thru axle on the other side of the front rim. The covers are clamped firmly and securely using a hidden threaded pin and create a neat and clean look. Made of high-quality aluminum, CNC milled on the most modern 5-axis machining centers. Color: black-glossy powder-coated, scope of delivery: 2 pieces The following two versions are available for these axle covers: - without milling (the covers are delivered in pure black) - with milling (the covers are supplied with Delivered with frozen CWC logo)