Accessoires

Prod. no.: HD-UNI057

The "Ferrara" mirror set in black gives your motorcycle a super cool look. Handlebar mirror with an aluminum head and adjustable stem. Thanks to the use of a second joint on the stem, there are additional adjustment options for your safety. WITH EC / ABE - E-number! Product specifications: Head width = 120mm, head height = 85mm, total width: 200, total height: 150 mm, head depth: 24 mm length, arm to joint: 150 mm length, arm to threaded bolt: 180 mm Scope of delivery: 2 pieces (left and right) incl. adapter pieces for mounting Translated with DeepL.com (free version)

Content: 2 Stück (€49.95* / 1 Stück)

€99.90*

Tip

Kellermann i.LOAD - IL 1

Prod. no.: HD-UNI051

Use of Kellermann LED indicators with original LED indicators (12V) - 1 set for 2 indicators (front or rear). Ensures perfect function of the indicator light, e.g. suitable for Harley-Davidson models with HD LAN! When retrofitting the original indicators, the flashing frequency of the indicators or the indicator light may increase. Load-independent flasher relays (e.g. R2) or multifunctional assistance systems (e.g. CR4) can provide a remedy. If this use is not possible or desired, an i.LOAD can provide a remedy. Translated with DeepL.com (free version)

€24.95*

LED indicator TINY (dark optics, incl. E-mark)

Prod. no.: HD-UNI049

SHIN YO LED indicator TINY! State-of-the-art lighting technology packed in extremely small dimensions. A visual highlight on every motorcycle. Mini indicator with plastic housing and transparent glass, E-Approved.Length approx. 24 mm, width approx. 17 mm & Height approx. 12 mm (threaded bolt: M8, length approx . 17 mm)Scope of delivery: 1 pairMaterial: PlasticBrand: Shin Yo

Content: 2 Stück (€32.45* / 1 Stück)

€64.90*

LED license plate light (incl. E-mark)

Prod. no.: HD-UNI046

Universal license plate lighting with LED lighting - suitable for all of our Cult-Werk side license plate holders! Also perfect for use with other holders. The exact measurements below.Product specifications: L Length = 56mm x width = 20mm x height = 25mmHole spacing for fastening = 46mmCable length = 450mmScope of delivery = 1 pieceE-test mark

€13.90*

Peg set RACING (suitable for Harley-Davidson models: Sportster from 2004, Cult-Werk® design)

Prod. no.: HD-SPO112

The Cult-Werk peg set "Racing" including foot pegs and shift peg suitable for Harley-Davidson Sportster models from 2004 to the present! The set was milled from an aluminum part and then powder-coated with a glossy black finish. In addition, an elaborately designed rubber with Cult-Werk lettering was produced to ensure a perfect grip and to round off the set visually perfectly! The footrests and the gearshift peg are attached to the motorcycle just like the original parts!

Content: 2 Stück (€84.50* / 1 Stück)

€169.00*

Handlebar clamp (suitable for Harley-Davidson models: all Sportster)

Prod. no.: HD-SPO029

The Cult-Werk handlebar clamp in black suitable for 1 inch handlebars, super cool look! The handlebar clamp is suitable for almost all Harley-Davidson Sportster models. The scope of delivery includes 4 screw covers. Black powder coated!

€42.00*

RACING footrests (suitable for Harley-Davidson models: Sportster from 2004, Cult-Werk® design)

Prod. no.: HD-SPO111

The Cult-Werk foot pegs "Racing" (2 pieces as shown) suitable for Harley-Davidson Sportster models from 2004 to the present! The footrests were milled from an aluminum part and then powder-coated with a glossy black finish. In addition, an elaborately designed rubber with Cult-Werk lettering was produced to ensure a perfect grip and to round off the set visually perfectly! The footrests are attached to the motorcycle just like the original parts!

Content: 2 Stück (€69.50* / 1 Stück)

Variants from €97.30*

€139.00*

%

Short belt guard (suitable for Harley-Davidson models: all Sportster)

Details

Short belt guard (suitable for Harley-Davidson models: all Sportster)

Prod. no.: HD-SPO047-B

The short belt guard from Cult-Werk is delivered in black and gives your motorcycle a cool look. All holes and millings are milled on state-of-the-art 5-axis CNC machining centers and the part is then powder-coated black!

€59.50* €85.00*

%

Details

Luggage rack OLD SCHOOL (suitable for Harley-Davidson models: all Sportster)

Prod. no.: HD-SPO064

The luggage rack from Cult-Werk is attached to the original holes in the fender struts. If you only use the luggage rack, bags etc. can be attached to it. If you want to use the luggage carrier for a second person, you can have a seat pad made with nubs on the underside with relatively little effort, which then fits nicely into the existing holes can and does not slip. For a two-seater, the footrest system should also be retrofitted.

€74.50* €160.00*

Travel limiter (12mm piston rod)

Prod. no.: HD-UNI033

Suitable for all Harley-Davidson models with external dampers and 12mm piston rod (e.g. Sportster). With these universal suspension travel limiters (4 pieces) Cult-Werk allows the deflection travel of the rear shock absorbers to be limited. The big advantage of these travel limiters is that they are made of relatively soft rubber. When touching down, no hard impacts are caused, but rather a "gentle" landing takes place. This prevents any possible landing on the tire. Assembly only takes a few seconds because the limiters are only clipped onto the piston rod. It is not necessary to remove the dampers! Dimensions: Inside √ò 12mm, outside √ò 38mm, thickness 10mm

Content: 4 Stück (€4.73* / 1 Stück)

€18.90*

Tank lift (suitable for Harley-Davidson models: all Sportster)

Prod. no.: HD-SPO011

The Cult-Werk tank lift raises the tank at the front attachment point and is height adjustable from 35 - 50mm. This means you can adjust the height of the tank to suit your own taste. By elevating the tank, the “peanut” shape is even more effective! An additional advantage of this tank lift is that there is enough space between the frame and the tank to allow the wiring harness to disappear under the tank. There is no need to change anything about the cables! Furthermore, the Cult-Werk tank lift has been visually very beautifully and elaborately designed. The holes match the look of the Sporstster perfectly and the lower edge of the tank lift forms a line with the lower edge of the tank! This also covers the cables that disappear behind the tank, creating an extremely clean look! CNC lasered, black powder-coated. Scope of delivery: 1 set of tank lift (left and right) + mounting material

€65.00*

Lowering kit (suitable for Harley-Davidson models: Sportster up to current)

Prod. no.: HD-SPO057

The lowering kit from Cult-Werk for all Harley-Davidson Sportster models from 2004 to the present gives your motorcycle a far more sporty look. The spring travel limiters (item number: HD-UNI033) are also required!

Content: 2 Stück (€79.50* / 1 Stück)

Variants from €111.30*

€159.00*

Belt guard long (suitable for Harley-Davidson models: all Sportster)

Prod. no.: HD-SPO048

The long belt guard from Cult-Werk is delivered in black and gives your motorcycle a cool look. All holes and millings are milled on state-of-the-art 5-axis CNC machining centers and the part is then powder-coated black!

Variants from €83.30*

€119.00*

Screws fender black (suitable for Harley-Davidson models: all Sportster 48)

Prod. no.: HD-SPO109

The Cult-Werk fender bolt kit in black suitable for all Harley-Davidson Sportster 48 models up to the current year of manufacture. These fender screws replace the original, galvanized screws with screws of equivalent quality. The black galvanized Cult-Werk screws are less noticeable in black and give the black front the finishing touch. 4 pieces, 2 pieces per side. Since the screws are not painted or coated, there is no flaking when screwed tight, simply permanently beautiful! Material: high-strength steel, black galvanized

Content: 4 Stück (€5.23* / 1 Stück)

€20.90*

Tank cap PopUp Ultraflat

Prod. no.: HD-UNI009

This pop-up tank cap in ultra-flat design with a right-hand thread and ventilation suitable for all Harley-Davidson tanks from 1996 onwards. (Dyna, Softail, Heritage, Fatboy, Touring etc. ...) (The exception is models that have a ventilation pipe in the tank neck, which rests against the locking of the pop-up function in the middle of the lid. It's best to check beforehand, the R may have to be used √∂tube can be flexed. Most of the time it is enough to move the locking pin on the side where it touches the tube a little so that it is flush with the guide there. Or you can Grind the split pin a little at both ends so that it doesn't protrude over the guide!) The special thing about the high-quality lid equipped with a seal is the retractable knurled screw with pop -Up function. If you press the closed tank cap with your thumb, the knurled screw can be recessed by turning it 90¬∞. The lid is now ultra-flat and has a classic smooth look. Ma √üe: external diameter 60 mm, height with countersunk knurled screw 36 mm, diameter of the knurled screw 38 mm, height of the knurled screw 9 mm. Thread diameter approx. 45 mm, thread depth approx. 28 mm

€65.00*

Screws handlebar clamp black (suitable for Harley-Davidson models: all Sportster)

Prod. no.: HD-SPO110

The Cult-Werk screw kit for the handlebar clamp in black suitable for all Harley-Davidson Sportster models up to the current year of manufacture. These handlebar clamp screws replace the original, galvanized screws with screws of equivalent quality. The black galvanized Cult-Werk screws are less noticeable in black and give the black front the finishing touch. 4 pieces, 2 pieces per side. Since the screws are not painted or coated, there is no flaking when screwed tight, simply permanently beautiful! Material: high-strength steel, black galvanized

Content: 4 Stück (€5.23* / 1 Stück)

€20.90*

Handlebar grip set (1", throttle cable models, with milling)

Prod. no.: HD-UNI017

Suitable for all Harley-Davidson models with 1 inch handlebars and throttle cable mount! The handlebar grips from Cult-Werk are delivered in black and give your motorcycle a cool look. All holes and millings are milled on the most modern 5-axis CNC machining centers and the part is then powder-coated black! The following two versions are available for these handlebar grips Available: - without milling (the handles are supplied with pure black end caps) - can be found in the shop with the item number HD-UNI016 - with Milling (the handles are delivered with the CWC logo milled into the end caps)

Content: 2 Stück (€97.50* / 1 Stück)

€195.00*

Screws for fork bridge black (suitable for Harley-Davidson models: Sportster from 2016 to current)

Prod. no.: HD-SPO108

The Cult-Werk fork bridge screw kit in black suitable for all Harley-Davidson Sportster models from 2016 onwards. These fork bridge screws replace the original, galvanized screws with screws of equivalent quality. The black galvanized Cult-Werk screws are less noticeable in black and give the black fork the finishing touch. 6 pieces, for the upper fork clamp 2 pieces ºck and 4 pieces for the lower triple clamp. Since the screws are not painted or coated, there is no flaking when tightening, simply permanently beautiful! Material: high-strength steel, black galvanized< /p>

Content: 6 Stück (€3.48* / 1 Stück)

€20.90*

LED taillight / indicator 3 in 1 (black with tinted glass)

Prod. no.: HD-UNI005

The LED set 3 in 1 (turn signals, taillight and brake light) suitable for all Harley-Davidson models! Innovative LED technology is hidden here in the smallest of spaces - a total of 5 powerful SMDs give the turn signal, tail light and brake light functions of this tiny tail light/turn signal unit their bright light. The whole thing is packed in a high-quality black metal housing with tinted glass, E-tested for rear installation.IMPORTANT : We recommend using the mini resistor offered (HD-UNI029) so that the display and the flashing frequency work properly!!Dimension: Width 75 mm, H√∂he 13 mm & depth 15.5 mm (threaded bolt: M8 x 1.25 mm, Length approx. 20 mm)Connections:Black cable = ground (-)White cable= turn signal (+)Yellow cable = taillight (+)Red cable = brake light (+) Scope of delivery: 1 pairMaterial: metalApproval: E-tested and therefore registration-free!! Brand: Highsider

Content: 2 Stück (€49.50* / 1 Stück)

€99.00*

Headlight grille KAMIKAZE (suitable for Harley-Davidson models: all Sportster 48)

Prod. no.: HD-SPO009

Easy installation, the grill from Cult-Werk is only screwed together with the headlight! Made from high quality steel. All holes and millings are milled and lasered on the most modern 5-axis CNC machining centers. Black powder coated. Perforated, thus matching the look of the Sportster and exactly adapted to the curvature of the headlight. Gives the Sportster a super cool retro style!

€129.00*

Drag bar handlebar 820mm (incl. TÜV, 3x perforated)

Prod. no.: HD-UNI026

This 1" drag bar handlebar in black is 3x perforated for cable routing and comes with a T√úV partial certificate. It is 820 mm wide and suitable for Harley-Davidson models from the year of manufacture 1984. The cables and lines do NOT need to be extended! The handlebars were installed on almost all Cult-Werk bikes, see pictures.

€139.00*

Handlebar grip set (1", throttle cable models)

Prod. no.: HD-UNI016

Suitable for all Harley-Davidson models with 1 inch handlebars and throttle cable mount! The handlebar grips from Cult-Werk are delivered in black and give your motorcycle a cool look. All holes and millings are milled on the most modern 5-axis CNC machining centers and the part is then powder-coated black! The following two versions are available for these handlebar grips Available: - without milling (the handles are supplied with pure black end caps) - with milling (the handles are supplied with the CWC logo milled into the End caps supplied) - can be found in the shop with the item number HD-UNI017

Content: 2 Stück (€59.50* / 1 Stück)

€119.00*

Mirror set ROUND (incl. E-mark)

Prod. no.: HD-UNI022

The mirror set 'ÄûRound'Äú from Cult-Werk in black gives your motorcycle a super cool look. It is made of aluminum and black anodized! The elegant universal mirrors are very well adjustable thanks to various joints and are suitable for mounting above or below the handlebars. Come E-test mark ‚Äì therefore FREE OF REGISTRATION ! Product specifications: Diameter = 102mm, stem length to joint = 150mm & Handle length to threaded bolt: 180mm Scope of delivery: 2 pieces (left and right) incl. adapter pieces for fastening

Content: 2 Stück (€49.50* / 1 Stück)

€99.00*

Screws for fork bridge black (suitable for Harley-Davidson models: all Sportster up to 2015)

Prod. no.: HD-SPO107

The Cult-Werk fork bridge screw kit in black suitable for all Harley-Davidson Sportster models up to 2015. These fork bridge screws replace the original, galvanized screws with screws of equivalent quality. The black galvanized Cult-Werk screws are less noticeable in black and give the black fork the finishing touch. 4 pieces, 2 pieces each for the upper triple clamp and 2 pieces for the for the lower triple clamp. Since the screws are not painted or coated, there is no flaking when tightened,¬ñ simply permanently beautiful! Material: high-strength steel, black galvanized

Content: 4 Stück (€5.23* / 1 Stück)

€20.90*

Shift peg RACING (suitable for Harley-Davidson models: various models)

Prod. no.: HD-UNI031

The Cult-Werk shift peg "Racing" suitable for Harley-Davidson Sportster models from 2004 onwards, V-Rod / Night Rod / Muscle models, Softail models from 2018 onwards as well as touring models! The shifter was milled from an aluminum part and then powder-coated with a glossy black finish. In addition, an elaborately designed rubber with Cult-Werk lettering was produced to ensure a perfect grip and to round off the product visually perfectly! The shift peg is simply replaced with the original part and attached to the motorcycle!

€45.00*

Drag bar handlebar 820mm (incl. TÜV)

Prod. no.: HD-UNI025

This 1" drag bar handlebar in black makes your motorcycle deep and wide and comes with a T√úV partial certificate. It is 820 mm wide and fits Harley-Davidson models from 1984 onwards. The cables and lines DO NOT need to be extended! The handlebars were installed on almost all Cult-Werk bikes, see pictures.

€105.00*

Ignition coil holder (suitable for Harley-Davidson models: all Sportster)

Prod. no.: HD-SPO027

This Cult-Werk ignition coil holder relocates the ignition coil from the steering head under the tank, creating a very clean look and clearing the view of the valve covers. Suitable for all Harley-Davidson Sportster models from 2006 onwards. Super cool look and nothing needs to be changed on the cables. Made from high quality steel. Easiest installation as only 4 screws! All holes and millings are milled and lasered on the most modern 5-axis CNC machining centers. Black powder coated!

€55.00*