Original Cult-Werk milled license plate suitable for all “Custom” & “Bagger” rear fenders from us! License plate size: W-180xH-200 mm (suitable for standard license plates Germany)License plate mounting: We recommend sticking the sealing strip at the bottom of the rear of the license plate as damping and using the Velcro strips on the upper corners. This way the license plate should fit perfectly and can also be removed again! The Cult-Werk plate is perfect for attaching the license plate to one of our touring fenders! Of course, the plate can also be used for other rear fenders as long as they have a straight surface for the 3-point mounting. This is a 100% custom-fit aftermarket product which can be fitted to a fender very easily without any adjustments! All holes and millings are milled on the latest 5-axis CNC machining centers, so that the plate has a very high quality! Included in delivery: - 1x license plate - 1x Velcro strip set - 1x sealing strip - mounting material

Original Cult-Werk milled license plate suitable for all “Custom” & “Bagger” rear fenders from us! License plate size: W-180xH-200 mm (suitable for standard license plates Germany)License plate mounting: We recommend sticking the sealing strip at the bottom of the rear of the license plate as damping and using the Velcro strips on the upper corners. This way the license plate should fit perfectly and can also be removed again! The Cult-Werk plate is perfect for attaching the license plate to one of our touring fenders! Of course, the plate can also be used for other rear fenders as long as they have a straight surface for the 3-point mounting. This is a 100% custom-fit aftermarket product which can be fitted to a fender very easily without any adjustments! All holes and millings are milled on the latest 5-axis CNC machining centers, so that the plate has a very high quality! Included in delivery: - 1x license plate - 1x Velcro strip set - 1x sealing strip - mounting material

Original Cult-Werk license plate in the middle suitable for all Harley-Davidson CVO models from year 2023 as well as Harley-Davidson Street Glide & Road Glide from year of manufacture 2024! License plate size:  W-180xH-200 mm ( suitable for standard license plates Germany)The Cult-Werk plate gives your Harley-Davidson a clean and cool look! This is a 100% custom-fit aftermarket product that can be replaced with the original license plate light and license plate plate without any adjustments! All holes and millings are milled on state-of-the-art 5-axis CNC machining centers, so that the plate only needs to be replaced with the included mounting material! The plate comes with contour milling to pick up the milled elements of the CVO models! Included in delivery:- 1x milled license plate holder (glossy black)- 1x LED license plate light incl. E-mark and milled holder - Mounting bracket for one reflector + reflector with E-number - Mounting material

Original Cult-Werk license plate in the middle suitable for all Harley-Davidson CVO models from year 2023 as well as Harley-Davidson Street Glide & Road Glide from year of manufacture 2024!V1 - All Black variant V2 - Black with contour milling License plate size:  W-180xH-200 mm ( suitable for standard license plates Germany)The Cult-Werk plate gives your Harley-Davidson a clean and cool look! This is a 100% custom-fit aftermarket product that can be replaced with the original license plate light and license plate plate without any adjustments! All holes and millings are milled on state-of-the-art 5-axis CNC machining centers, so that the plate only needs to be replaced with the included mounting material!  Included in delivery:- 1x black powder-coated license plate holder - 1x LED license plate light incl. E-mark and milled holder - Mounting bracket for one reflector + reflector with E-number - mounting material

Complete Cult-Werk rear fender "Bagger" V1 incl. mounting kit suitable for Harley-Davidson models: Touring CVO from 2023 & Touring from 2024   The rear fender is plug & play and must be fitted over the original. The original rear lights can still be used as well as the original license plate light!   This Cult-Werk rear fender is an ABS plastic part and is CNC milled on state-of-the-art 5-axis machining centers! This ensures that these parts are of OEM quality. No cheap GRP! You can have the plastic part painted immediately in a paintable version, which in turn is very inexpensive, as it is a perfect surface! The complete conversion kit consists of a rear fender incl. mounting kit as well as integrated LED rear and brake lights and indicators.   The rear fender "Bagger" V1 has a very elaborate design! The Cult-Werk rear fender is very easy to fit. It is best to remove the side cases at the rear before fitting, then the ABS rear fender is fitted over the original metal fender and fastened with the original screws on the seat! In addition, the sheet metal brackets supplied are screwed on to secure the fender to the frame.   The following two surface variants are available for this rear conversion: - Paintable (Minimal painting effort - due to perfect surface finish! The fender is delivered ready for painting and can be painted immediately!) - Glossy black (No need to paint - this saves you the entire painting costs! Remove the protective film and the fender shines in glossy black!)   The following parts are included in the scope of delivery: - ABS rear fender - mounting material - 2x brackets for reinforcement

Complete Cult-Werk rear conversion kit "Bagger" V1, including rear fender with cut-out for original rear lights, long case and side cover set suitable for Harley-Davidson Touring models Touring - CVO models from 2023 and Touring models from 2024!   With this kit, the original rear lights and the original license plate lighting are reused without changing the connection.   This Cult-Werk KIT consists of several ABS plastic parts and is CNC milled on state-of-the-art 5-axis machining centers! This ensures that these parts are of OEM quality. No cheap GRP! You can have the plastic part painted immediately in a paintable version, which in turn is very inexpensive, as it is a perfect surface!   The excavator kit V1 has a very elaborate design! The Cult-Werk rear end is very easy to fit. It is best to remove the side cases at the rear before fitting, then the ABS rear fender is fitted over the original metal fender and fastened with the original screws on the seat! In addition, the sheet metal brackets supplied are screwed on to secure the fender to the frame. Before final assembly of the ABS fender, the LED lights must be attached (these must be glued in - silicone or any other adhesive) and the wiring and routing of the wiring harness must be carried out.   The following two surface variants are available for this rear conversion: - Paintable (ATTENTION: Cases are always delivered in glossy black!!!! Minimal painting effort - due to perfect surface finish! The fender is delivered ready for painting and can be painted immediately!) - Glossy black (does not need to be painted - this saves you the entire painting costs! Remove the protective film and the fender shines in glossy black!)   The following parts are included in the scope of delivery: - ABS rear fender - Side case in glossy black - Mounting material (mounting bracket for rear lights) - 2x brackets for reinforcement

Complete original Cult-Werk rear conversion "Custom" V1 incl. mounting kit suitable for Harley-Davidson Touring models from 2014 onwards (Street Glide‚Ñ¢, Road Glide‚Ñ¢ & Road King‚Ñ¢ - also special versions as well as Ultra and Limited)! IMPORTANT: The rear conversion NOW comes with a wiring harness including a resistor for the correct flashing frequency! The conversion is therefore absolutely PLUG AND PLAY! The original license plate lighting must be used and connected to the wiring harness on the existing wires (red & black)! This Cult-Werk rear conversion is an ABS plastic part and is made using the latest technology 5-axis machining centers CNC milled! This ensures that these parts are of original equipment quality. No cheap GRP! You can have the plastic part painted immediately in a paintable version, which in turn is very cheap because it is a perfect surface! The complete conversion kit consists of a rear fender including a mounting kit as well as integrated LED tail and brake lights and indicators. The rear fender "Custom" V1 was visually very elaborately designed! The Cult-Werk rear is characterized by its very easy assembly. It is best to remove the side cases at the rear before assembly, then mount the ABS rear fender over the original metal fender and fasten it with the original seat screws! In addition, the supplied sheet metal holders are screwed on to attach the fender to the frame. Before final assembly of the ABS fender, the LED lights must be attached (these must be glued in - silicone or any other adhesive) and the wiring and laying of the cable harness must be carried out. The following two surface variants are available for this rear conversion: - Paintable (Minimal painting effort 'Äì as perfect surface quality! The fender is delivered ready for painting and can be √§Can be painted immediately!) - Glossy black (No longer needs to be painted - so you save the entire painting costs! Remove the protective film and the fender shines in glossy black!) The scope of delivery includes the following parts:- ABS rear fender- 2x LED tail and brake lights 2 in 1 (already on the wiring harness)- 2x LED Indicator (already on the wiring harness)- Mounting material- 2x holders for stiffening- Wiring harness including resistor and plug = Plug and Play THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!! !

Complete Cult-Werk rear conversion "Custom" including mounting kit suitable for Harley-Davidson Touring models from 2014 (Street Glide, Road Glide & Road King - also special Versions as well as Ultra and Limited)! IMPORTANT: The rear conversion NOW comes with a wiring harness including a resistor for the correct flashing frequency! The conversion is therefore absolutely PLUG AND PLAY!The original license plate lighting must be used and connected to the wiring harness on the existing wires (red & black)! This one Cult-Werk rear conversion is an ABS plastic part and is CNC milled on the most modern 5-axis machining centers! This ensures that these parts are of original equipment quality. No cheap GRP! You can have the plastic part painted immediately in a paintable version, which in turn is very cheap because it is a perfect surface! The complete conversion kit consists of a rear fender including a mounting kit as well as integrated LED tail and brake lights and indicators. The rear fender "Custom" V2 was visually very elaborately designed! The Cult-Werk rear is characterized by its very easy assembly. It is best to remove the side cases at the rear before assembly, then mount the ABS rear fender over the original metal fender and fasten it with the original seat screws! In addition, the supplied sheet metal holders are screwed on to attach the fender to the frame. Before final assembly of the ABS fender, the LED lights must be attached (these must be glued in - silicone or any other adhesive) and the wiring and laying of the cable harness must be carried out. The following two surface variants are available for this rear conversion: - Paintable (Minimal painting effort 'Äì as perfect surface quality! The fender is delivered ready for painting and can basically √§Can be painted immediately!) - Glossy black (No longer needs to be painted - so you save the entire painting costs! Remove the protective film and the fender shines in glossy black!) The scope of delivery includes the following parts:- ABS rear fender- 6x LED tail and brake lights 2 in 1 (already on the wiring harness)- 4x LED Indicator (already on the wiring harness)- Mounting material- 2x holders for stiffening- Wiring harness incl. resistor and plug = Plug and Play  THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!