Kellermann i.BOS systems (intelligent boxing operation system) provide a remedy if the indicator light lights up too quickly or other indicator lights light up in the cockpit after the blinker conversion. Used to rectify faulty displays in the cockpit. i.BOS-CL1 ensures that the indicator and warning lights function correctly when using DF combinations* e.g. suitable for Harley Davidson models with HD-LAN. *In addition, the "LED indicators" option may have to be activated in the software. Requires 1 set for 2 indicators / 2 DF indicators (blinker, tail light, brake light) Functional features: Blinker, brake light & tail light Vehicle make: suitable for Harley-Davidson Vehicle models: with HD LAN Problem report: indicator indicator lights, warning lights

Use of Kellermann LED indicators with original LED indicators (12V) - 1 set for 2 indicators (front or rear). Ensures perfect function of the indicator light, e.g. suitable for Harley-Davidson models with HD LAN! When retrofitting the original indicators, the flashing frequency of the indicators or the indicator light may increase. Load-independent flasher relays (e.g. R2) or multifunctional assistance systems (e.g. CR4) can provide a remedy. If this use is not possible or desired, an i.LOAD can provide a remedy. Translated with DeepL.com (free version)

SHIN YO LED indicator TINY! State-of-the-art lighting technology packed in extremely small dimensions. A visual highlight on every motorcycle. Mini indicator with plastic housing and transparent glass, E-Approved.Length approx. 24 mm, width approx. 17 mm & Height approx. 12 mm (threaded bolt: M8, length approx . 17 mm)Scope of delivery: 1 pairMaterial: PlasticBrand: Shin Yo

Universal license plate lighting with LED lighting - suitable for all of our Cult-Werk side license plate holders! Also perfect for use with other holders. The exact measurements below.Product specifications: L Length = 56mm x width = 20mm x height = 25mmHole spacing for fastening =  46mmCable length = 450mmScope of delivery = 1 pieceE-test mark

The mini resistor is suitable for all Harley-Davidson models with turn signal relays, where LED indicators are retrofitted. In addition, it is required on new models with a control unit in order to adjust the display on the speedometer according to frequency. This ensures that the flashing frequency remains the same and that the new LED indicators work properly!

Suitable for all Harley-Davidson Sportster models as well as for V-Rod, Night Rod Special, Muscle, Street Rod and Rocker models and also for Dyna models. CNC milled and then black powder-coated. Can be combined with all common indicators, for example from Kellermann! The holders are screwed into the shock absorbers!

The "Old School" 3 in 1 LED set (rear and brake light as well as indicators) is mainly installed at Cult-Werk on the Sportster models due to its appearance, but it can also be used on various other models be used! High-quality power LEDs are installed in the black aluminum housing and all indicators are delivered with E-mark - FREE OF REGISTRATION. IMPORTANT: We recommend using the Mini on offer -Resistor (HD-UNI029) so that the display and the flashing frequency work properly!! Product specifications: 45mm x approx. 70mm, threaded bolt = M10 x 1.5 mm & Scope of delivery = 1 pairConnections: Black cable = ground (-), Blue cable = turn signal (+), Yellow cable = taillight (+) & Red cable = brake light (+)

The LED set 3 in 1 (turn signals, taillight and brake light) suitable for all Harley-Davidson models! Innovative LED technology is hidden here in the smallest of spaces - a total of 5 powerful SMDs give the turn signal, tail light and brake light functions of this tiny tail light/turn signal unit their bright light. The whole thing is packed in a high-quality black metal housing with tinted glass, E-tested for rear installation.IMPORTANT : We recommend using the mini resistor offered (HD-UNI029) so that the display and the flashing frequency work properly!!Dimension: Width 75 mm, H√∂he 13 mm & depth 15.5 mm (threaded bolt: M8 x 1.25 mm, Length approx. 20 mm)Connections:Black cable = ground (-)White cable= turn signal (+)Yellow cable = taillight (+)Red cable = brake light (+) Scope of delivery: 1 pairMaterial: metalApproval: E-tested and therefore registration-free!! Brand: Highsider

The Cult-Werk indicator mounting plates are required for converting to smaller indicators. The plates fit many Harley-Davidson models such as Sportster, Dyna or Softail! The mounting plates are designed so that the pressure points in the paint are also covered by the original indicators. Ideal for converting original indicators to smaller indicators. Suitable for all indicators with 8mm and 10mm threads. The mounting plates are screwed together with the smaller indicators and thus cover the second hole of the original indicators. CNC lasered. Colour: black-glossy powder-coated, scope of delivery: 2 pieces

The "Old School" LED indicator set at Cult-Werk is mainly installed on the Sportster models due to its appearance, but it can be used on various other models! High-quality power LEDs are installed in the black aluminum housing and all indicators are delivered with E-mark - FREE OF REGISTRATION. IMPORTANT: We recommend using the Mini on offer -Resistor (HD-UNI029) so that the display and the flashing frequency work properly!! Product specifications: 45mm x approx. 70mm, threaded bolt = M10 x 1.5 mm & Scope of delivery = 1 pair

Suitable for all Harley-Davidson Softail models from 2008 onwards as well as for V-Rod, Night Rod Special, Muscle, Street Rod and Rocker models and also for Dyna models. CNC milled and then black powder-coated. Can be combined with all common indicators, for example from Kellermann! The holders are mounted on the handle fittings and simply screwed onto the mirrors!