Complete 6-piece Cult-Werk fork cover kit in black with the lower covers made of aluminum or with folding linings suitable for Harley-Davidson Dyna models with 49mm forks from 2007 to the present! With this kit from Cult-Werk you can cover the fork tubes above, between and below the fork clamps. This covers the fork tubes and makes the entire fork appear beefier and completely black! This fork cover kit can be used with the original front fender or custom fenders. The individual covers are attached using threaded pins and thus center themselves on the fork tubes. This ensures a secure hold! Our covers are made of high-quality aluminum and are milled on the most modern 5-axis machining centers and then powder-coated with a glossy black finish. This guarantees absolutely the highest quality! Installation is very simple, the upper and lower covers are simply pushed over the fork tube and screwed tight. On the inside of the lower cover there is a cutout for access to the fender and is therefore hardly visible. The following two variants are available for this 6-piece kit: - Kit made of pure aluminum (2x fork caps, 2x upper fork covers & 2x lower fork covers) - Kit with folding linings (2x fork caps, 2x upper fork covers & 2x 49mm folding linings)

Suitable for all Harley-Davidson Dyna models with 49 mm forks up to 2017 and for Harley-Davidson Street Bob from 2018! With this 2-piece fork cover kit from Cult-Werk you can cover the lower fork tubes below the fork clamp. This covers the chrome-plated fork tubes and the entire fork appears beefier and completely black! The covers are attached using hidden threaded pins and thus center themselves on the fork tubes. This ensures that the covers are held securely. Our covers are made of high-quality aluminum and are milled on the most modern 5-axis machining centers and then powder-coated with a glossy black finish. This ensures absolutely the highest quality! Installation is very simple, the cover is just pushed over the fork tube and screwed tight. This Gable Cover Kit is suitable for the original front fender and for custom fenders. Colour: black-glossy powder-coated, scope of delivery: 2 pieces

This 2-piece fork cover kit from Cult-Werk covers the upper chrome-plated fork tubes and is suitable for all Harley-Davidson Dyna models from 2007 to 2017. The entire fork appears beefier and completely black ! Milled from high-quality aluminum on the most modern 5-axis machining centers. Colour: black-glossy powder-coated, scope of delivery: 2 pieces

The Cult-Werk fork caps cover the ends of the fork tubes above the fork clamp and are securely fastened with a hidden threaded pin. These caps are suitable for Harley-Davidson V-Rod / Night Rod models from 2002 to 2011, Breakout models from 2013 to 2017 as well as Dyna models from 2007 to 2017! Our covers are made of high-quality aluminum and are milled on state-of-the-art 5-axis machining centers and then powder-coated glossy black. This ensures absolutely the highest quality! 1 set = 2 pieces

These Cult-Werk brake caliper covers with 3D look are self-adhesive and are glued to the original silver covers of the brake caliper. When you order you will receive a set (2 pieces) of covers in glossy black with "Cult-Werk Customs" lettering and CWC logos! The covers fit all Harley-Davidson Softail models from 2000 to 2017, for Softail models from 2018 only on the front, for Dyna models from 2000 to 2017 and also for all Sportster models !

Suitable for all Harley-Davidson Twin Cam Softail models from 1999 to 2017 as well as for all Harley-Davidson Softail Millwaukee-Eight models from 2017 to 2018 and also suitable for Harley-Davidson Davidson Dyna models from 2007 to 2017. Milled and lasered from high-quality aluminum on state-of-the-art 5-axis machining centers. The Cult-Werk clutch cover (Derby Cover) is anodized black. The look and design is then milled and lasered into the finished anodized part on state-of-the-art 5-axis machining centers. It can easily be exchanged for the original part and thus greatly enhances your Breakout.

These bobber boots from Cult-Werk protect and cover the fork tubes below the lower fork clamp to achieve a completely black and compact fork look. They basically fit all Harley-Davidson models that have 49mm fork tubes. You will also find fork covers in our range to cover the fork tube between the fork clamps. Exact product specifications: top diameter = 49mm, bottom diameter = 65mm & Length original = 180mm Scope of delivery: 2x folding sheets and 2x cable ties

Suitable for all Harley-Davidson models with the Twin-Cam engine (88, 96, 103 & 110) from 1999 onwards (Softail, Dyna & Touring models, not for Milwaukee-Eight models) . Milled from high-quality aluminum on the most modern 5-axis machining centers. The Cult-Werk ignition cover (timer cover) is anodized black and comes with the Cult-Werk logo. The look and design is then milled into the finished anodized part on state-of-the-art 5-axis machining centers. It can easily be exchanged for the original part and thus greatly enhances your Harley.

These axle covers from Cult-Werk are suitable for all Harley-Davidson Softail models from 2008 to 2017, V-Rod / Night Rod & Muscle models from 2002 to 2017, Touring models from 2008 and Dyna models from 2007 to 2017 and cover the wheel nut on one side and the thru axle on the other side of the front rim. The covers are clamped firmly and securely using a hidden threaded pin and create a neat and clean look. Made of high-quality aluminum, CNC milled on the most modern 5-axis machining centers. Color: black-glossy powder-coated, scope of delivery: 2 pieces The following two versions are available for these axle covers: - without milling (the covers are delivered in pure black) - with milling (the covers are supplied with Delivered with frozen CWC logo)