%
Rear conversion RACING (suitable for Harley-Davidson models: Breakout from 2023) €1,930.50* €2,145.00*
Prod. no.: HD-BRO137
Complete rear conversion "Racing" in the 1-seater or 2-seater version including ABS rear fender, mounting material, inner fender made of metal, wiring harness and genuine leather seat suitable for Harley-Davidson Breakout models from 2023 onwards! This Cult-Werk rear conversion is an ABS plastic part and is CNC milled on the most modern 5-axis machining centers! This ensures that this part is of original equipment quality. It's not a cheap GRP! The rear fender "Racing" was visually very elaborately designed and the rear is characterized by its very easy assembly. All you have to do is remove the original rear section and replace it with our metal inner fender. The lighting in the rear fender must then be wired using the wiring harness provided (the lighting units must be glued in - e.g. use silicone or other adhesive) and finally the ABS plastic part is placed on top and screwed to the metal inner fender! The rear can be used for tires up to 280 mm and the narrow construction gives it a very beefy look. In the photos you can see a 280 tire that was mounted on a widened rim! The matching seats (main seat + pillion pad) in the shape to match the rear are of course included. These are made of genuine leather (smooth outside & alcantara inside) in black with diamond stitching (black seams) and embossed Cult workmanship. Logo manufactured. It is simply exchanged for the original seat and is attached exactly like the original seat! If you have any questions, please contact us at any time! IMPORTANT: The spring travel and the freedom of movement of the fender must be checked and if necessary limit! The required suspension travel limiters are included in delivery! The following two surface variants are available for this rear conversion: - Can be painted (Minimal painting effort because the surface is perfect! The fender is delivered ready for painting and can basically be painted immediately!) - Glossy black (no longer required painted - so you save the entire painting costs! Remove the protective film and the fender shines in glossy black!) The scope of delivery includes the following parts Included: - ABS plastic rear fender - Metal inner fender - Wiring harness including lighting for "plug and play" connection - Genuine leather seat and pillion pad (depending on selection) - Mounting material- 2x spring travel limiters THE INSTALLATION INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!
Variants from €1,732.50*
%
Rear conversion RACING (suitable for Harley-Davidson models: Breakout from 2013 - 2017)
Prod. no.: HD-BRO071
Complete rear conversion "Racing" from Cult-Werk in the 1-seater or 2-seater version including ABS rear fender, mounting material, inner fender made of metal, lighting and genuine leather seat suitable for Harley-Davidson Breakout models from 2013 to 2017! This Cult-Werk rear conversion is an ABS plastic part and is CNC milled on the most modern 5-axis machining centers! This ensures that this part is of original equipment quality. It's not a cheap GRP! The rear fender "Racing" was visually very elaborately designed and the rear is characterized by its very easy assembly. All you have to do is remove the original rear section and replace it with our metal inner fender. The lighting in the rear fender must then be wired using the lighting provided (the lighting units must be glued in - e.g. use silicone or other adhesive) and finally the ABS plastic part is placed on top and screwed to the metal inner fender! The rear can be used for tires up to 280 mm and the narrow construction gives it a very beefy look. In the photos you can see a 280 tire that was mounted on a widened rim! The matching seats (1-seater or with pillion pad) in the shape to match the rear are of course included. These are made of genuine leather (smooth outside & alcantara inside) in black with diamond stitching (black seams) and embossed Cult workmanship. Logo manufactured. It is simply exchanged for the original seat and is attached exactly like the original seat! If you have any questions, please contact us at any time! IMPORTANT: The spring travel and the freedom of movement of the fender are Be sure to check and limit if necessary! The required suspension travel limiters are included in delivery! The following two surface variants are available for this rear conversion: - Can be painted (Minimal painting effort because the surface is perfect! The fender is delivered ready for painting and can basically be painted immediately!) - Glossy black (No longer needs to be painted - so you save the entire painting costs! Remove the protective film and the fender shines in glossy black!) Im The scope of delivery includes the following parts: - ABS plastic rear fender - Metal inner fender - Lighting equipment - Real leather seat and pillion pad (depending on selection) - Mounting material- 2x suspension travel limiters THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!
€999.00* €1,925.00*
%
Rear conversion RACING (suitable for Harley-Davidson models: FXDR from 2019) €1,608.75* €2,145.00*
Prod. no.: HD-BRO061
Complete rear conversion "Racing" from Cult-Werk in the 1-seater or 2-seater version including ABS rear fender, mounting material, inner fender made of metal, wiring harness and genuine leather seat suitable for Harley-Davidson FXDR models from 2019 onwards! This Cult-Werk rear conversion is an ABS plastic part and is CNC milled on the most modern 5-axis machining centers! This ensures that this part is of original equipment quality. It's not a cheap GRP! The rear fender "Racing" was visually very elaborately designed and the rear is characterized by its very easy assembly. All you have to do is remove the original rear section and replace it with our metal inner fender. The lighting in the rear fender must then be wired using the wiring harness provided (the lighting units must be glued in - e.g. use silicone or other adhesive) and finally the ABS plastic part is placed on top and screwed to the metal inner fender! The rear can be used for tires up to 280 mm and the narrow construction gives it a very beefy look. In the photos you can see a 280 tire that was mounted on a widened rim! The matching seats (1-seater or with pillion pad) in the shape to match the rear are of course included. These are made of genuine leather (smooth outside & alcantara inside) in black with diamond stitching (black seams) and embossed Cult workmanship. Logo manufactured. It is simply exchanged for the original seat and is attached exactly like the original seat! If you have any questions, please contact us at any time! IMPORTANT: The spring travel and the freedom of movement of the fender are Be sure to check and limit if necessary! The required suspension travel limiters are included in delivery! The following two surface variants are available for this rear conversion: - Can be painted (Minimal painting effort because the surface is perfect! The fender is delivered ready for painting and can basically be painted immediately!) - Glossy black (No longer needs to be painted - so you save the entire painting costs! Remove the protective film and the fender shines in glossy black!) Im The scope of delivery includes the following parts: - ABS plastic rear fender - Metal inner fender - Wiring harness including lighting for "plug and play" connection - Genuine leather seat and pillion pad (depending on selection ) - Mounting material- 2x spring travel limiters < span style="color: #ff0000;">THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!! < /p>
Variants from €1,443.75*
%
Rear conversion RACING (suitable for Harley-Davidson models: Breakout from 2018) €1,930.50* €2,145.00*
Prod. no.: HD-BRO048
Complete rear conversion "Racing" in the 1-seater or 2-seater version including ABS rear fender, mounting material, inner fender made of metal, wiring harness and genuine leather seat suitable for Harley-Davidson Breakout models from 2018 onwards! This Cult-Werk rear conversion is an ABS plastic part and is CNC milled on the most modern 5-axis machining centers! This ensures that this part is of original equipment quality. It's not a cheap GRP! The rear fender "Racing" was visually very elaborately designed and the rear is characterized by its very easy assembly. All you have to do is remove the original rear section and replace it with our metal inner fender. The lighting in the rear fender must then be wired using the wiring harness provided (the lighting units must be glued in - e.g. use silicone or other adhesive) and finally the ABS plastic part is placed on top and screwed to the metal inner fender! The rear can be used for tires up to 280 mm and the narrow construction gives it a very beefy look. In the photos you can see a 280 tire that was mounted on a widened rim! The matching seats (main seat + pillion pad) in the shape to match the rear are of course included. These are made of genuine leather (smooth outside & alcantara inside) in black with diamond stitching (black seams) and embossed Cult workmanship. Logo manufactured. It is simply exchanged for the original seat and is attached exactly like the original seat! If you have any questions, please contact us at any time! IMPORTANT: The spring travel and the freedom of movement of the fender must be checked and if necessary limit! The required suspension travel limiters are included in delivery! The following two surface variants are available for this rear conversion: - Can be painted (Minimal painting effort because the surface is perfect! The fender is delivered ready for painting and can basically be painted immediately!) - Glossy black (no longer required painted - so you save the entire painting costs! Remove the protective film and the fender shines in glossy black!) The scope of delivery includes the following parts Included: - ABS plastic rear fender - Metal inner fender - Wiring harness including lighting for "plug and play" connection - Genuine leather seat and pillion pad (depending on selection) - Mounting material- 2x spring travel limiters THE INSTALLATION INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!
Variants from €1,732.50*
%
Rear fender ORIGINAL STYLE SHORT (suitable for Harley-Davidson models: Street Bob & Softail Standard from 2018) €239.25* €319.00*
Prod. no.: HD-BRO096
The Cult-Werk rear fender in the original style suitable for the Harley-Davidson Street Bob, Softail Standardas well as on the Softail Slim from 2018 onwards! The fender is made of high-quality ABS plastic and all holes and millings are milled on the most modern 5-axis CNC machining centers. st, so that the rear fender can be exchanged for the original one and also attached to the original mounting points. The rear fender is TOP processed and fits perfectly between the original struts. All mounting material is included in the scope of delivery and no changes need to be made to the frame of the Street Bob! The following two surface variants are available for this rear fender Available: - Can be painted (Minimal painting effort - because the surface is perfect! The fender is delivered ready for painting and can basically be painted immediately!) - Glossy black (No longer needs to be painted - so you save all the painting costs! Remove the protective film and the fender shines in glossy black!) THE PARTS REPORT WILL BE AVAILABLE IN THE "DOWNLOADS" TAB!!!
Variants from €186.37*
%
Swing saddle OLD SCHOOL (suitable for Harley-Davidson models: Street Bob & Softail Standard from 2018)
Prod. no.: HD-BRO125
The swing saddle 'ÄûOld School'Äú with two seat halves covered in leather from Cult-Werk turns your motorcycle into a real eye-catcher! Especially if you want to achieve a cool old school look on your beloved motorcycle, this is the perfect part for it! All holes and millings are milled on the most modern 5-axis CNC machining centers, so the part fits perfectly and without adjustments! IMPORTANT INFORMATION: We recommend Be sure to use our frame cover (HD-BRO126)! This means that the entire frame is hidden under the saddle so that neither screw points, shock absorbers nor cables are visible! If the original struts (e.g. for the original fender) are installed in conjunction with the saddle, the frame cover at the rear corners must be adjusted!
€401.25* €535.00*
%
Frame cover (suitable for Harley-Davidson models: Street Bob & Softail Standard from 2018)
Prod. no.: HD-BRO126
100% precisely fitting ABS plastic part - NO GRP! All existing holes and millings are milled on the most modern 5-axis CNC machining centers, so that the frame cover only needs to be installed. It greatly enhances your motorcycle, as all cables, screw points and the damper are concealed! The part is delivered in glossy black! (No longer needs to be painted - so you save the entire painting costs! Remove the protective film and the cover shines in glossy black!) IMPORTANT INFORMATION: The frame cover should Can be used in conjunction with our swing saddle (HD-BRO125). If the frame cover is used with the original struts (e.g. for original fenders), you have to adjust the cover backwards at the corners!!
€186.75* €249.00*
%
Rear conversion RACING (suitable for Harley-Davidson models: Fat Boy from 2018) €1,930.50* €2,145.00*
Prod. no.: HD-BRO111
Complete rear conversion "Racing" in the 1-seater or 2-seater version including ABS rear fender, mounting material, inner fender made of metal, wiring harness and genuine leather seat suitable for Harley-Davidson FAT BOY models from 2018 onwards! This Cult-Werk rear conversion is an ABS plastic part and is CNC milled on the most modern 5-axis machining centers! This ensures that this part is of original equipment quality. It's not a cheap GRP! The rear fender "Racing" was visually very elaborately designed and the rear is characterized by its very easy assembly. All you have to do is remove the original rear section and replace it with our metal inner fender. The lighting in the rear fender must then be wired using the wiring harness provided (the lighting units must be glued in - e.g. use silicone or other adhesive) and finally the ABS plastic part is placed on top and screwed to the metal inner fender! The rear can be used for tires up to 280 mm and the narrow construction gives it a very beefy look. In the photos you can see a 280 tire that was mounted on a widened rim! The matching seats (1-seater or with pillion pad) in the shape to match the rear are of course included. These are made of genuine leather (smooth outside & alcantara inside) in black with diamond stitching (black seams) and embossed Cult workmanship. Logo manufactured. It is simply exchanged for the original seat and is attached exactly like the original seat! If you have any questions, please contact us at any time! IMPORTANT: The spring travel and the freedom of movement of the fender are Be sure to check and limit if necessary! The required suspension travel limiters are included in delivery! The following two surface variants are available for this rear conversion: - Can be painted (Minimal painting effort because the surface is perfect! The fender is delivered ready for painting and can basically be painted immediately!) - Glossy black (No longer needs to be painted - so you save the entire painting costs! Remove the protective film and the fender shines in glossy black!) Im The scope of delivery includes the following parts: - ABS plastic rear fender - Metal inner fender - Wiring harness including lighting for "plug and play" connection - Genuine leather seat and pillion pad (depending on selection ) - Mounting material- 2x spring travel limiters < span style="color: #ff0000;">THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!
Variants from €1,732.50*
%
Swinging rear fender (suitable for Harley-Davidson models: Street Bob & Softail Standard from 2018)
Prod. no.: HD-BRO127
The swinging rear fender 'ÄûOld School'Äú from Cult-Werk suitable for Harley-Davidson Softail a real eye-catcher! Especially if you want to achieve a cool old-school look on your motorcycle, this is the perfect part for it! All holes and millings are milled on the most modern 5-axis CNC machining centers, so the part fits perfectly and without adjustments! The fender can be installed in different lengths to remain T√úV compliant and then it can simply be shortened at the desired point when attaching it to the swingarm! IMPORTANT INFORMATION: We definitely recommend our frame cover (HD-BRO126) as well as our "Old School" Sching saddle (HD-BRO125) for the rear fender! This completes the entire look of the bike! The frame cover also hides everything under the swing saddle so that neither screw points, dampers nor cables can be seen! The following two Surface variants are available for this front fender: - Paintable (Minimal painting effort 'Äì as perfect surface quality! The fender is delivered ready for painting and can basically be painted immediately!) - Glossy black (No longer needs to be painted - so you save the entire painting costs! Remove the protective film and the fender shines in glossy black!) THE PARTS CERTIFICATE IS IN THE TAB "DOWNLOADS" PROVIDED!!!
€769.50* €855.00*
%
Rear conversion kit "Old School" (suitable for Harley-Davidson models: Street Bob & Softail Standard from 2018)
Prod. no.: HD-BRO128
The rear conversion kit 'ÄûOld School‚Äú from Cult-Werk suitable for Harley-Davidson Softail is a real eye-catcher! Especially if you want to achieve a cool old-school look on your beloved motorcycle, this is the perfect kit for it! All holes and millings are milled on the most modern 5-axis CNC machining centers, so the part fits perfectly and without adjustments! The fender can be installed in different lengths to remain T√úV compliant and then it can simply be shortened at the desired point when attaching it to the swingarm! IMPORTANT INFORMATION: The frame cover also hides everything under the swing saddle so that neither screw points, dampers nor cables can be seen! THE SADDLE will be shipped as shown in the raw part picture! Following Two surface variants are available for this front fender:- Can be painted (Minimal painting effort because perfect surface finish! The fender can be painted Delivered quickly and can basically be painted immediately!) - Glossy black (No longer needs to be painted - so you save the entire painting costs! Remove the protective film and the fender shines in glossy black. nzend!) THE PARTS REPORT WILL BE AVAILABLE IN THE "DOWNLOADS" TAB!!!
€1,395.00* €1,550.00*