Cult-Werk® | suitable for CRUISER Models!

1
2
3
4

%

Clutch cover "VISION" (suitable for Harley-Davidson models: Softail from 2019)

Prod. no.: HD-BRO158

Suitable for all Harley-Davidson Softail models built from 2019 (FXDR 114, Sport Glide, Street Bob, Fat Bob, Low Rider, Breakout, Slim, Fat Boy, Deluxe, Standard & Heritage Classic). Milled and laser-cut from high-quality aluminum on state-of-the-art 5-axis machining centers. Its special highlight: an integrated inspection glass that offers a permanent view of the inner workings. This not only allows you to keep an eye on the condition of the inside at all times, but also gives your bike an unmistakable look. It can be easily replaced with the original part.

€179.99* €219.00*

Lighting Units 3in1 incl. Holder milled (suitable for Central License Plate Holder)

Prod. no.: HD-BRO157

This is a pair of lighting units for our original center license plate holder suitable for Harley-Davidson Softail models. The units are supplied incl. permanently mounted 3in1 LED lighting and can be used to convert the center bracket to direct lighting at a later date!

Content: 2 Stück (€69.50* / 1 Stück)

€139.00*

Standard Slide-In Frame (suitable for: Cult-Werk license plate holder or rear conversion)

Prod. no.: HD-UNI054

The Cult-Werk slide-in frame for the license plate for the listed license plate sizes and countries! Suitable for various Harley-Davidson models. The Cult-Werk slide-in frame is made of high-quality steel, CNC laser-cut and then powder-coated in black! License plate size: W-180xH-200 mm (suitable for Germany) or W-210xH-170 mm (suitable for Austria) Scope of delivery: - 1x slide-in frame in the selected size - 1x adapter for license plate illumination incl. 2 screws PLEASE SPECIFY WHEN ORDERING WHETHER THE ADAPTER PIECE IS REQUIRED FOR THE LICENSE PLATE LIGHT OR NOT!

€179.00*

Mirror set FERRARA (incl. E-Number)

Prod. no.: HD-UNI057

The "Ferrara" mirror set in black gives your motorcycle a super cool look. Handlebar mirror with an aluminum head and adjustable stem. Thanks to the use of a second joint on the stem, there are additional adjustment options for your safety. WITH EC / ABE - E-number! Product specifications: Head width = 120mm, head height = 85mm, total width: 200, total height: 150 mm, head depth: 24 mm length, arm to joint: 150 mm length, arm to threaded bolt: 180 mm Scope of delivery: 2 pieces (left and right) incl. adapter pieces for mounting Translated with DeepL.com (free version)

Content: 2 Stück (€49.95* / 1 Stück)

€99.90*

Mirror Set WAVE (with E-Number)

Prod. no.: HD-UNI056

The "Wave" mirror set in black gives your motorcycle a super cool look. Small color accents between the mirror head and arm add color to your machine. The asymmetrical shape and the CNC-milled lines of the housing create both a modern and a classic look. WITH EC / ABE - E-approved!Product specifications: Head width = 124 mm, head height = 86 mm, total width: 225 mm, total height: 175 mm Handlebar length: 55 mm to the bend, then 130 mm to the joint and another 40 mm to the threaded bolt, (without adapter 29 mm)Scope of delivery: 2 pieces (left and right) incl. adapter pieces for mounting

Content: 2 Stück (€64.98* / 1 Stück)

€129.95*

Tip

License Plate Center V2, without 3in1 Lighting (suitable for Harley-Davidson models: Low Rider & Heritage Classic from 2018)

Prod. no.: HD-BRO156-A

Original Cult-Werk license plate center V2 suitable for all Harley-Davidson Low Rider models (Low Rider, Low Rider S & Low Rider ST) from model year 2018 and Harley-Davidson Heritage Classic models from 2018! License plate size: W-210xH-170 mm (suitable for standard Austrian license plates) B-180xH-200 mm (suitable for standard license plates Germany) The Cult-Werk slide-in frame V1 gives your Harley-Davidson a clean and cool look! This is a 100% custom-fit aftermarket product which can be replaced with the original lighting unit on the fender and the license plate without any adjustments! All holes and millings are milled on state-of-the-art 5-axis CNC machining centers, so that the frame only needs to be replaced with the supplied mounting material! Included in delivery: - 1x milled slide-in frame (matt black) - 1x LED license plate light incl. E-mark and milled mount - 1x bracket for perfect mounting on the rear fender - Mounting material

€399.00*

Tip

License Plate Center V2, incl. 3in1 Lighting (suitable for Harley-Davidson models: Low Rider & Heritage Classic from 2018)

Prod. no.: HD-BRO154-D

Original Cult-Werk license plate center V2 suitable for all Harley-Davidson Low Rider models (Low Rider, Low Rider S & Low Rider ST) from model year 2018 and Harley-Davidson Heritage Classic models from 2018! License plate size: W-210xH-170 mm (suitable for standard Austrian license plates) B-180xH-200 mm (suitable for standard license plates Germany) The Cult-Werk slide-in frame V1 gives your Harley-Davidson a clean and cool look! This is a 100% custom-fit aftermarket product which can be replaced with the original lighting unit on the fender and the license plate without any adjustments! All holes and millings are milled on state-of-the-art 5-axis CNC machining centers, so that the frame only needs to be replaced with the supplied mounting material! Included in delivery: - 1x milled slide-in frame (matt black) - 1x LED license plate light incl. E-mark and milled mount - 1x bracket for perfect mounting on the rear fender - Mounting material

€519.00*

Tip

License Plate Center V1, incl. 3in1 Lighting (suitable for Harley-Davidson models: Low Rider & Heritage Classic from 2018)

Prod. no.: HD-BRO153-D

Original Cult-Werk license plate center V1 suitable for all Harley-Davidson Low Rider models (Low Rider, Low Rider S & Low Rider ST) from model year 2018 and Harley-Davidson Heritage Classic models from 2018! License plate size: W-210xH-170 mm (suitable for standard Austrian license plates) B-180xH-200 mm (suitable for standard Germany license plates) The Cult-Werk slide-in frame V1 gives your Harley-Davidson a clean and cool look! This is a 100% custom-fit aftermarket product which can be replaced with the original lighting unit on the fender and the license plate without any adjustments! All holes and millings are milled on state-of-the-art 5-axis CNC machining centers, so that the frame only needs to be replaced with the supplied mounting material! Included in delivery: - 1x milled slide-in frame (matt black) - 1x LED license plate light incl. E-mark and milled mount - 1x bracket for perfect mounting on the rear fender - Mounting material

€499.00*

Tip

License Plate Center V1, without 3in1 Lighting (suitable for Harley-Davidson models: Low Rider & Heritage Classic from 2018)

Prod. no.: HD-BRO155-A

Original Cult-Werk license plate center V1 suitable for all Harley-Davidson Low Rider models (Low Rider, Low Rider S & Low Rider ST) from model year 2018 and Harley-Davidson Heritage Classic models from 2018! License plate size: W-210xH-170 mm (suitable for standard Austrian license plates) B-180xH-200 mm (suitable for standard license plates Germany) The Cult-Werk slide-in frame V1 gives your Harley-Davidson a clean and cool look! This is a 100% custom-fit aftermarket product which can be replaced with the original lighting unit on the fender and the license plate without any adjustments! All holes and millings are milled on state-of-the-art 5-axis CNC machining centers, so that the frame only needs to be replaced with the supplied mounting material! Included in delivery: - 1x milled slide-in frame (matt black) - 1x LED license plate light incl. E-mark and milled mount - 1x bracket for perfect mounting on the rear fender - Mounting material

€379.00*

Tip

Crash Bar End Caps V2 (suitable for Cult-Werk Crash Bars)

Prod. no.: HD-BRO148

This is a pair of end caps V2 for our original Cult-Werk crash bars. Supplied with black aluminum end caps in black with subsequent "Cult-Werk Clubstyle" design milling. These caps are perfect in combination with the golden spacers to achieve a high-quality clubstyle look on the motorcycle! Scope of delivery: 2 pieces / milled black Length: 45mm

Content: 2 Stück (€34.50* / 1 Stück)

€69.00*

Tip

Crash Bar End Caps V1 (suitable for Cult-Werk Crash Bars)

Prod. no.: HD-BRO147

This is a pair of V1 end caps for our original Cult-Werk crash bars. Supplied with black plastic end caps in black which serve as "pomps" for the crash bar in the event of a fall! Scope of delivery: 2 pieces / black Length: 50mm

Content: 2 Stück (€11.45* / 1 Stück)

€22.90*

Tip

Crash Bar Distances Gold (suitable for Cult-Werk Crash Bars)

Prod. no.: HD-BRO146

This is a pair of spacers for our original Cult-Werk crash bars. They are supplied in gold anodized and can be mounted on the crash bar as an eye-catcher for the perfect look! Scope of delivery: 2 pieces / gold anodized Thickness: 15mm

Content: 2 Stück (€12.50* / 1 Stück)

€25.00*

Tip

Rear Crash Bar "Clubstyle" (suitable for Harley-Davidson models: Softail from 2018)

Prod. no.: HD-BRO144

The original Cult-Werk "Clubstyle" crash bar for the rear is suitable for all Harley-Davidson Softail models from model year 2018 onwards and gives your motorcycle the perfect clubstyle performance look. It not only serves as an important design object in the Clubstyle area, but can also absorb damage to the motorcycle in the event of a crash!All drillings and millings are milled on the most modern 5-axis CNC machining centers, so that the crash bar has a TOP fitting accuracy and can be attached to the original mounting points on the frame of the motorcycle!The bar is TOP processed and is available in the following surface variants and materials: - Steel with glossy black powder coating and Cult-Werk footrest rubber - Stainless steel without coating for a TOP performance look and Cult-Werk footrest rubber The crash bar is supplied with black plastic end caps as standard, but other options and additional gold spacers are also available for the perfect look (see under accessories)!

Content: 2 Stück (€99.50* / 1 Stück)

€199.00*

Tip

Crash bar front "Clubstyle" X1 (suitable for Harley-Davidson models: all Softail with Mid-Controls)

Prod. no.: HD-BRO149

The original Cult-Werk "Clubstyle" crash bar for the front is suitable for all Harley-Davidson Softail models with Mid Controls from model year 2018 and gives your motorcycle the perfect Clubstyle performance look. It not only serves as an important design object in the Clubstyle area, but can also absorb damage to the motorcycle in the event of a crash!All drillings and millings are milled on the most modern 5-axis CNC machining centers, so that the crash bar has a TOP fitting accuracy and can be attached to the original mounting points on the frame of the motorcycle! The bar is TOP processed and is available in the following surface variants and materials: - Steel with glossy black powder coating - Stainless steel without coating for a TOP performance look The crash bar is supplied with black milled aluminum end caps but other options and additional gold spacers are also available for the perfect look (see under accessories)!

€399.00*

Tip

Crash bar front "Clubstyle" (suitable for Harley-Davidson models: all Softail with Mid-Controls)

Prod. no.: HD-BRO142

The original Cult-Werk "Clubstyle" crash bar for the front is suitable for all Harley-Davidson Softail models with Mid Controls from model year 2018 and gives your motorcycle the perfect Clubstyle performance look. It not only serves as an important design object in the Clubstyle area, but can also absorb damage to the motorcycle in the event of a crash!All drillings and millings are milled on the most modern 5-axis CNC machining centers, so that the crash bar has a TOP fitting accuracy and can be attached to the original mounting points on the frame of the motorcycle! The bar is TOP processed and is available in the following surface variants and materials: - Steel with glossy black powder coating - Stainless steel without coating for a TOP performance look The crash bar is supplied with black plastic end caps as standard, but other options and additional gold spacers are also available for the perfect look (see under accessories)!

€349.00*

Tip

Rear Crash Bar "Clubstyle" X1 (suitable for Harley-Davidson models: Softail from 2018)

Prod. no.: HD-BRO151

The original Cult-Werk "Clubstyle" X1 crash bar for the rear is suitable for all Harley-Davidson Softail models from model year 2018 onwards and gives your motorcycle the perfect clubstyle performance look. It not only serves as an important design object in the Clubstyle area, but can also absorb damage to the motorcycle in the event of a crash!All drillings and millings are milled on the most modern 5-axis CNC machining centers, so that the crash bar has a TOP fitting accuracy and can be attached to the original mounting points on the frame of the motorcycle!The bar is TOP processed and is available in the following surface variants and materials: - Steel with glossy black powder coating and Cult-Werk footrest rubber - Stainless steel without coating for a TOP performance look and Cult-Werk footrest rubber The crash bar is supplied with black aluminum end caps but other options and additional gold spacers are also available for the perfect look (see under accessories)!

Content: 2 Stück (€124.50* / 1 Stück)

€249.00*

Tip

Kellermann i.BOS - CL1

Prod. no.: HD-UNI050

Kellermann i.BOS systems (intelligent boxing operation system) provide a remedy if the indicator light lights up too quickly or other indicator lights light up in the cockpit after the blinker conversion. Used to rectify faulty displays in the cockpit. i.BOS-CL1 ensures that the indicator and warning lights function correctly when using DF combinations* e.g. suitable for Harley Davidson models with HD-LAN. *In addition, the "LED indicators" option may have to be activated in the software. Requires 1 set for 2 indicators / 2 DF indicators (blinker, tail light, brake light) Functional features: Blinker, brake light & tail light Vehicle make: suitable for Harley-Davidson Vehicle models: with HD LAN Problem report: indicator indicator lights, warning lights

€34.95*

Tip

Kellermann i.LOAD - IL 1

Prod. no.: HD-UNI051

Use of Kellermann LED indicators with original LED indicators (12V) - 1 set for 2 indicators (front or rear). Ensures perfect function of the indicator light, e.g. suitable for Harley-Davidson models with HD LAN! When retrofitting the original indicators, the flashing frequency of the indicators or the indicator light may increase. Load-independent flasher relays (e.g. R2) or multifunctional assistance systems (e.g. CR4) can provide a remedy. If this use is not possible or desired, an i.LOAD can provide a remedy. Translated with DeepL.com (free version)

€24.95*

LED indicator TINY (dark optics, incl. E-mark)

Prod. no.: HD-UNI049

SHIN YO LED indicator TINY! State-of-the-art lighting technology packed in extremely small dimensions. A visual highlight on every motorcycle. Mini indicator with plastic housing and transparent glass, E-Approved.Length approx. 24 mm, width approx. 17 mm & Height approx. 12 mm (threaded bolt: M8, length approx . 17 mm)Scope of delivery: 1 pairMaterial: PlasticBrand: Shin Yo

Content: 2 Stück (€32.45* / 1 Stück)

€64.90*

KOSO Mini LED license plate light (incl. E-mark)

Prod. no.: HD-UNI048

Universal license plate lighting with LED lighting - suitable for our central license plate holder (HD-BRO078 & HD-BRO079)! Also perfect for use with other holders. The exact dimensions below.Product specifications: Length = 43mm x width = 10mm x height = 12mm Thread spacing f √ºr Fastening = 27mm Cable length = 250mm Scope of delivery = 1 piece E-test mark

€13.90*

LED license plate light (incl. E-mark)

Prod. no.: HD-UNI046

Universal license plate lighting with LED lighting - suitable for all of our Cult-Werk side license plate holders! Also perfect for use with other holders. The exact measurements below.Product specifications: L Length = 56mm x width = 20mm x height = 25mmHole spacing for fastening = 46mmCable length = 450mmScope of delivery = 1 pieceE-test mark

€13.90*

Pillion footrests RACING (suitable for Harley-Davidson models: Softail from 2018)

Prod. no.: HD-BRO134

The Cult-Werk pillion footrests "Racing" (2 pieces as shown) suitable for Harley-Davidson Softail 2-seater models from 2018 to current! The footrests were milled from an aluminum part and then powder-coated with a glossy black finish. In addition, an elaborately designed rubber with Cult-Werk lettering was produced to ensure a perfect grip and to round off the set visually perfectly! The footrests are attached to the motorcycle just like the original parts!

Content: 2 Stück (€102.50* / 1 Stück)

€205.00*

Rear conversion RACING (suitable for Harley-Davidson models: Breakout from 2023)

Prod. no.: HD-BRO137

Complete rear conversion "Racing" in the 1-seater or 2-seater version including ABS rear fender, mounting material, inner fender made of metal, wiring harness and genuine leather seat suitable for Harley-Davidson Breakout models from 2023 onwards! This Cult-Werk rear conversion is an ABS plastic part and is CNC milled on the most modern 5-axis machining centers! This ensures that this part is of original equipment quality. It's not a cheap GRP! The rear fender "Racing" was visually very elaborately designed and the rear is characterized by its very easy assembly. All you have to do is remove the original rear section and replace it with our metal inner fender. The lighting in the rear fender must then be wired using the wiring harness provided (the lighting units must be glued in - e.g. use silicone or other adhesive) and finally the ABS plastic part is placed on top and screwed to the metal inner fender! The rear can be used for tires up to 280 mm and the narrow construction gives it a very beefy look. In the photos you can see a 280 tire that was mounted on a widened rim! The matching seats (main seat + pillion pad) in the shape to match the rear are of course included. These are made of genuine leather (smooth outside & alcantara inside) in black with diamond stitching (black seams) and embossed Cult workmanship. Logo manufactured. It is simply exchanged for the original seat and is attached exactly like the original seat! If you have any questions, please contact us at any time! IMPORTANT: The spring travel and the freedom of movement of the fender must be checked and if necessary limit! The required suspension travel limiters are included in delivery! The following two surface variants are available for this rear conversion: - Can be painted (Minimal painting effort because the surface is perfect! The fender is delivered ready for painting and can basically be painted immediately!) - Glossy black (no longer required painted - so you save the entire painting costs! Remove the protective film and the fender shines in glossy black!) The scope of delivery includes the following parts Included: - ABS plastic rear fender - Metal inner fender - Wiring harness including lighting for "plug and play" connection - Genuine leather seat and pillion pad (depending on selection) - Mounting material- 2x spring travel limiters THE INSTALLATION INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!

Variants from €1,925.00*

€2,145.00*

Speedometer offset kit (suitable for Harley-Davidson models: Low Rider S from 2022)

Prod. no.: HD-BRO139

With this kit from Cult-Werk suitable for all Harley-Davidson Low Rider S models from 2022 onwards the speedometer can be relocated to the original headlight mask! The offset can only be used in conjunction with a new handlebar clamp, such as: HD-SPO029! It is made of steel and then powder-coated in glossy black! No cables need to be extended during assembly, it is enough to reroute the cables to get to the right position! In principle, the holder replaces the original holder of the mask and the mask can then be attached to the new holder again! A cover is included for the speedometer, which serves as splash protection from below and for fastening!

Variants from €143.50*

€205.00*

%

Rear conversion RACING (suitable for Harley-Davidson models: Breakout from 2013 - 2017)

Details

Rear conversion RACING (suitable for Harley-Davidson models: Breakout from 2013 - 2017)

Prod. no.: HD-BRO071

Complete rear conversion "Racing" from Cult-Werk in the 1-seater or 2-seater version including ABS rear fender, mounting material, inner fender made of metal, lighting and genuine leather seat suitable for Harley-Davidson Breakout models from 2013 to 2017! This Cult-Werk rear conversion is an ABS plastic part and is CNC milled on the most modern 5-axis machining centers! This ensures that this part is of original equipment quality. It's not a cheap GRP! The rear fender "Racing" was visually very elaborately designed and the rear is characterized by its very easy assembly. All you have to do is remove the original rear section and replace it with our metal inner fender. The lighting in the rear fender must then be wired using the lighting provided (the lighting units must be glued in - e.g. use silicone or other adhesive) and finally the ABS plastic part is placed on top and screwed to the metal inner fender! The rear can be used for tires up to 280 mm and the narrow construction gives it a very beefy look. In the photos you can see a 280 tire that was mounted on a widened rim! The matching seats (1-seater or with pillion pad) in the shape to match the rear are of course included. These are made of genuine leather (smooth outside & alcantara inside) in black with diamond stitching (black seams) and embossed Cult workmanship. Logo manufactured. It is simply exchanged for the original seat and is attached exactly like the original seat! If you have any questions, please contact us at any time! IMPORTANT: The spring travel and the freedom of movement of the fender are Be sure to check and limit if necessary! The required suspension travel limiters are included in delivery! The following two surface variants are available for this rear conversion: - Can be painted (Minimal painting effort because the surface is perfect! The fender is delivered ready for painting and can basically be painted immediately!) - Glossy black (No longer needs to be painted - so you save the entire painting costs! Remove the protective film and the fender shines in glossy black!) Im The scope of delivery includes the following parts: - ABS plastic rear fender - Metal inner fender - Lighting equipment - Real leather seat and pillion pad (depending on selection) - Mounting material- 2x suspension travel limiters THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!

€999.00* €1,925.00*

Front fender CUSTOM V2 (suitable for Harley-Davidson models: Low Rider Sab 2018)

Prod. no.: HD-BRO118

The front fender from Cult-Werk suitable for Harley-Davidson Low Rider S models from 2018 helps create a sportier look . It is shorter, narrower and clears the view of the front wheel. The part gives your motorcycle a clean and cool look! This fender is a 100% precisely fitting ABS plastic part - NOT a cheap GRP! No adjustment work required! All holes and millings are milled on the most modern 5-axis CNC machining centers, so that the fender only needs to be exchanged for the original. Original fit - new design with indicated air inlets including grilles to cover the openings. The following surface variant is available for this front fender:- Can be painted (Minimal painting effort because the surface is perfect! The front spoiler is delivered ready for painting and can basically be painted immediately!) - Glossy black (no longer required painted - so you save the entire painting costs! Remove the protective film and the front spoiler shines in glossy black!) THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!

€215.00*

SET Dash Cover including speedometer offset (suitable for Harley-Davidson models: Low Rider S from 2018 to 2021)

Prod. no.: HD-BRO123

The dash cover including the speedometer offset from Cult-Werk fits all Harley-Davidson Low Rider S models from 2018 to 2021! The kit gives your motorcycle a clean, cool and flatter look on the tank and is required as a replacement for the original cover if the fittings are relocated to the headlight mask with our offset! This cover is a 100% precisely fitting ABS plastic part - NOT a cheap GRP! All holes and millings are milled on the most modern 5-axis CNC machining centers! During assembly it is necessary to shorten the holders for the original dash cover and then holes must be drilled - then the cover is attached with the new bracket supplied attached (Details can be found in the assembly instructions!). The following surface variants are available for this dash cover:- Can be painted (Minimal painting effort because the surface is perfect! The cover is delivered ready for painting and can basically be painted immediately!)- Glossy black (No longer needs to be painted - so you save the entire painting costs! Remove the protective film and the cover shines in glossy black) THE ASSEMBLY INSTRUCTIONS ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!

€429.00*

Front fender CUSTOM V1 (suitable for Harley-Davidson models: Low Rider Sab 2018)

Prod. no.: HD-BRO116

The front fender from Cult-Werk suitable for Harley-Davidson Low Rider S models from 2018 gives a sportier look . It is shorter, narrower and clears the view of the front wheel. The part gives your motorcycle a clean and cool look! This fender is a 100% precisely fitting ABS plastic part - NOT a cheap GRP! No adjustment work required! All holes and millings are milled on the most modern 5-axis CNC machining centers, so that the fender only needs to be exchanged for the original. Original fit - new design. The following surface variants are available for this front fender:- Can be painted (minimal painting effort because the perfect surface √§chen quality! The front spoiler is delivered ready for painting and can basically be painted immediately!)- Glossy black (No longer needs to be painted - so you save the entire painting costs! Remove the protective film and The original front spoiler shines in glossy black!) THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!

€205.00*

Dash Cover (suitable for Harley-Davidson models: Low Rider from 2018 & Breakout from 2023)

Prod. no.: HD-BRO120

The dash cover from Cult-Werk fits all Harley-Davidson Low Rider S, Low Rider ST from year of manufacture 2018 and on Breakout 117 from year of manufacture 2023!The part gives your motorcycle a clean, cool and flatter look on the tank and is needed as a replacement for the original cover if the fittings are relocated to the headlight mask with our offset! This cover is a 100% precisely fitting ABS plastic part - NOT a cheap GRP! All holes and millings are milled on the most modern 5-axis CNC machining centers! When installing models from 2018 to 2020, it is necessary to shorten the holders for the original dash cover and then holes must be drilled - then the cover is included attached to the new bracket supplied (Details can be found in the assembly instructions!). On the newer models there is an additional retaining bracket that is screwed to the original bracket so that the screw connection goes further up! The following surfaces The following variants are available for this dash cover:- Can be painted (Minimal painting effort, because the surface is perfect! The cover is delivered ready for painting and can basically be used immediately be painted!)- Glossy black (No longer needs to be painted - so you save the entire painting costs! Remove the protective film and the cover shines in glossy black!) THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!

€269.00*

License plate holder with TÜV (suitable for Harley-Davidson models: FXDR from 2019)

Prod. no.: HD-BRO059-A

The Cult-Werk side license plate holder incl. GTú parts certificate for the listed license plate sizes and countries. The holder is suitable for all Harley-Davidson FXDR from 2019 onwards! The shortest license plate holder on the market guarantees you a TOP look! The license plate holder from Cult-Werk is made of high-quality steel, CNC lasered and then powder-coated black! Incl. LED license plate lighting with E-test mark. License plate size: W-180xH-200 mm (suitable for √ºfor Germany) or W-210xH-170 mm (suitable for √Austria) or W-180xH-140 mm (suitable for Switzerland) or W-170xH- 170 mm (suitable for Italy) orW-210xH-130 mm (suitable for France) orW-210xH-140 mm (suitable for Netherlands) The installation is very simple, the license plate holder is attached to the swing arm instead of the original bracket that goes around the rear wheel. The required assembly material is of course included in the scope of delivery. Since the Cult-Werk license plate holder has an extra short mounting foot compared to other license plate holders available on the market, it is visually much more appealing! Scope of delivery : - 1x side license plate holder - 1x LED license plate light incl. E-test mark (pre-assembled!) - 4x screws incl. nuts for license plate fastening- 1x pan head screw 5/16" THE ASSEMBLY INSTRUCTIONS AND THAT PARTS REPORTS ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!

€319.00*

Front fender CUSTOM V1 (suitable for Harley-Davidson models: FXDR from 2019)

Prod. no.: HD-BRO057

The front fender from Cult-Werk suitable for Harley-Davidson FXDR models from 2019 for a sportier look. It is shorter, narrower and clears the view of the front wheel. The part gives your motorcycle a clean and cool look! This fender is a 100% custom-fit ABS plastic part - NOT a cheap GRP! The fender therefore offers a 100% perfect fit! No adjustment work necessary! All holes and millings are milled on the most modern 5-axis CNC machining centers, so that the fender only needs to be exchanged for the original. It is TOP processed, fits perfectly and makes the view better onto the front wheel. Original fit - new design. The following surface variants are available for this front fender: - Can be painted (minimal painting effort because the perfect surface The fender is delivered ready for painting and can basically be painted immediately!) THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!! < p>

€205.00*

%

Clip-on handlebar RACING (suitable for Harley-Davidson models: FXDR from 2019, without EC / ABE)

Prod. no.: HD-BRO056-B

Suitable for all Harley-Davidson FXDR models from 2019 onwards as well as for other models with 55mm fork legs. The clip-on handlebars from Cult-Werk can be installed at two different heights by simply turning them! Our clip-on handlebars are made of high-quality aluminum and are milled on the most modern 5-axis machining centers and then powder-coated matt black. This ensures absolutely the highest quality! Installation is very easy, as the handlebars are simply replaced with the original ones and then the handlebar tubes with all switches and handles are screwed back on! The clip-on handlebars do not have EC / ABE!! All parts required for assembly are included!

Content: 2 Stück (€225.75* / 1 Stück)

€451.50* €645.00*

Front fender CUSTOM V2 (suitable for Harley-Davidson models: FXDR from 2019)

Prod. no.: HD-BRO058

The front fender from Cult-Werk suitable for Harley-Davidson FXDR models from 2019 for a sportier look. It is shorter, narrower and clears the view of the front wheel. There are 3 air inlets on each side that have been adapted to the look of the motorcycle. Grilles to glue in for the air inlets are included! The part gives your motorcycle a clean and cool look! This fender is a 100% custom-fit ABS plastic part - NOT a cheap GRP! The fender therefore offers a 100% perfect fit! No adjustment work necessary! All holes and millings are milled on the most modern 5-axis CNC machining centers, so that the fender only needs to be exchanged for the original. It is TOP processed, fits perfectly and makes the view better onto the front wheel. Original fit - new design. The following surface variants are available for this front fender: - Can be painted (minimal painting effort because the perfect surface The fender is delivered ready for painting and can basically be painted immediately!) THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!! < p>

€215.00*

Rear conversion RACING (suitable for Harley-Davidson models: FXDR from 2019)

Prod. no.: HD-BRO061

Complete rear conversion "Racing" from Cult-Werk in the 1-seater or 2-seater version including ABS rear fender, mounting material, inner fender made of metal, wiring harness and genuine leather seat suitable for Harley-Davidson FXDR models from 2019 onwards! This Cult-Werk rear conversion is an ABS plastic part and is CNC milled on the most modern 5-axis machining centers! This ensures that this part is of original equipment quality. It's not a cheap GRP! The rear fender "Racing" was visually very elaborately designed and the rear is characterized by its very easy assembly. All you have to do is remove the original rear section and replace it with our metal inner fender. The lighting in the rear fender must then be wired using the wiring harness provided (the lighting units must be glued in - e.g. use silicone or other adhesive) and finally the ABS plastic part is placed on top and screwed to the metal inner fender! The rear can be used for tires up to 280 mm and the narrow construction gives it a very beefy look. In the photos you can see a 280 tire that was mounted on a widened rim! The matching seats (1-seater or with pillion pad) in the shape to match the rear are of course included. These are made of genuine leather (smooth outside & alcantara inside) in black with diamond stitching (black seams) and embossed Cult workmanship. Logo manufactured. It is simply exchanged for the original seat and is attached exactly like the original seat! If you have any questions, please contact us at any time! IMPORTANT: The spring travel and the freedom of movement of the fender are Be sure to check and limit if necessary! The required suspension travel limiters are included in delivery! The following two surface variants are available for this rear conversion: - Can be painted (Minimal painting effort because the surface is perfect! The fender is delivered ready for painting and can basically be painted immediately!) - Glossy black (No longer needs to be painted - so you save the entire painting costs! Remove the protective film and the fender shines in glossy black!) Im The scope of delivery includes the following parts: - ABS plastic rear fender - Metal inner fender - Wiring harness including lighting for "plug and play" connection - Genuine leather seat and pillion pad (depending on selection ) - Mounting material- 2x spring travel limiters < span style="color: #ff0000;">THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!! < /p>

Variants from €1,925.00*

€2,145.00*

Rear conversion RACING (suitable for Harley-Davidson models: Breakout from 2018)

Prod. no.: HD-BRO048

Complete rear conversion "Racing" in the 1-seater or 2-seater version including ABS rear fender, mounting material, inner fender made of metal, wiring harness and genuine leather seat suitable for Harley-Davidson Breakout models from 2018 onwards! This Cult-Werk rear conversion is an ABS plastic part and is CNC milled on the most modern 5-axis machining centers! This ensures that this part is of original equipment quality. It's not a cheap GRP! The rear fender "Racing" was visually very elaborately designed and the rear is characterized by its very easy assembly. All you have to do is remove the original rear section and replace it with our metal inner fender. The lighting in the rear fender must then be wired using the wiring harness provided (the lighting units must be glued in - e.g. use silicone or other adhesive) and finally the ABS plastic part is placed on top and screwed to the metal inner fender! The rear can be used for tires up to 280 mm and the narrow construction gives it a very beefy look. In the photos you can see a 280 tire that was mounted on a widened rim! The matching seats (main seat + pillion pad) in the shape to match the rear are of course included. These are made of genuine leather (smooth outside & alcantara inside) in black with diamond stitching (black seams) and embossed Cult workmanship. Logo manufactured. It is simply exchanged for the original seat and is attached exactly like the original seat! If you have any questions, please contact us at any time! IMPORTANT: The spring travel and the freedom of movement of the fender must be checked and if necessary limit! The required suspension travel limiters are included in delivery! The following two surface variants are available for this rear conversion: - Can be painted (Minimal painting effort because the surface is perfect! The fender is delivered ready for painting and can basically be painted immediately!) - Glossy black (no longer required painted - so you save the entire painting costs! Remove the protective film and the fender shines in glossy black!) The scope of delivery includes the following parts Included: - ABS plastic rear fender - Metal inner fender - Wiring harness including lighting for "plug and play" connection - Genuine leather seat and pillion pad (depending on selection) - Mounting material- 2x spring travel limiters THE INSTALLATION INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!

Variants from €1,925.00*

€2,145.00*

Air filter cover RACING (suitable for Harley-Davidson models: Softail from 2018 & Touring from 2021)

Prod. no.: HD-BRO040

The air filter cover ‚ÄûRacing‚Äú from Cult-Werk suitable for all Harley-Davidson Softail models from 2018 with Millwaukee-Eight 114 engine as well as Touring models from 2021 with Millwaukee-Eight 114 and turns the ugly original air filter into a style element! This saves you a new air filter and also the T√úV registration. The cover is designed to fit exactly onto the original air filter. 100% precisely fitting ABS plastic part - NO GRP! No adjustment work necessary! All holes and millings are milled on the most modern 5-axis CNC machining centers, so that the air filter cover only needs to be replaced with the original air filter cover. The air filter cover is TOP processed, fits perfectly and turns the boring original air filter into a cool part in the popular old school style with fins! The following two surface variants are available for this air filter cover : - Can be painted (Minimal painting effort because the surface is perfect! The lid is delivered ready for painting and can basically be painted immediately!) - Black glossy √§nzend (No longer needs to be painted - so you save the entire painting costs! Remove the protective film and the lid shines in glossy black!) THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!

€159.00*

1
2
3
4