License plate holder with TÜV (suitable for Indian Motorcycle models: Scout models from 2015)

The Cult-Werk side license plate holder suitable for all Indian Scout models from year 2015 to current for the listed license plate sizes and L√ §nder and a milled plate including insert frame for the license plate and GTü parts certificate. The shortest license plate holder on the market guarantees you a TOP look! The license plate holder from Cult-Werk is made of high-quality steel, CNC lasered and then powder-coated black! Incl. LED license plate lighting with E-test mark. License plate size:  W-180xH-200 mm (suitable for √ºfor Germany) orW-210xH-170 mm (suitable for √Austria) other sizes with slide-in frames will follow... Installation is relatively easy because the license plate holder is screwed onto the rear axle. To do this, jack up the Indian and loosen the axle nut on the right side. Pull out the axle and then remove the original rectangular washer (only on the left side)! Attach our license plate holder with the axle and screw it back on the right side with the original washer and axle nut. We always recommend using some medium-strength screw locking material! Since the Cult-Werk license plate holder has an extra short mounting foot compared to other license plate holders available on the market, it is visually much more appealing! Scope of delivery : - 1x side license plate holder incl. insert frame - 1x LED license plate light incl. E-test mark (pre-assembled!) - 1x special stainless steel nut with collar M24x2 - 2x grub screws for license plate attachment THE PARTS REPORT IS AVAILABLE IN THE "DOWNLOADS" TAB!!!

The Cult-Werk side license plate holder with GTú parts certificate for the listed license plate sizes and countries. Suitable for all Harley-Davidson Breakout models from 2013 to 2017 as well as suitable for Harley-Davidson Rocker models from 2008 to 2011 ! The shortest license plate holder on the market guarantees you a TOP look! The Cult-Werk license plate holder is made of high-quality steel, CNC lasered and then powder-coated black! Incl. LED license plate lighting with E-test mark. License plate size: W-180xH-200 mm (suitable for √ºfor Germany) or W-210xH-170 mm (suitable for √Austria) or W-180xH-140 mm (suitable for Switzerland) or W-170xH- 170 mm (suitable for Italy) orW-210xH-130 mm (variant 2 suitable for France) orW-210xH-140 mm (suitable for the Netherlands) < p class="MsoNormal">The installation is very simple, the license plate holder is screwed onto the rear axle. This requires a special nut with collar, which is of course included in the scope of delivery. Since the Cult-Werk license plate holder has an extra short mounting foot compared to other license plate holders available on the market, it is visually much more appealing! Scope of delivery : - 1x side license plate holder - 1x LED license plate light incl. E-test mark (pre-assembled!) - 1x special stainless steel nut with collar M24x1.5 - 4x screws including nuts for license plate attachment THE ASSEMBLY INSTRUCTIONS AND THE PARTS CERTIFICATE ARE AVAILABLE A LITTLE DOWN IN THE "AVAILABLE DOWNLOADS" SECTION!!!

The Cult-Werk side license plate holder with silent block bearing as well as GTü parts certificate for the listed license plate sizes and countries. Suitable for all Harley-Davidson Sportster models! (IMPORTANT: The holder is 100% suitable for Sportster models from the year 2000 onwards. For older models, please check beforehand whether the model is listed based on the area of use so that no problems arise when registering!) /p> Since the unsprung masses of Sportster models are particularly high, many of the license plate holders available on the market break. The silent block reduces these to a minimum and a long service life is guaranteed! The shortest license plate holder on the market guarantees you a TOP look! The Cult-Werk license plate holder is made of high-quality steel, CNC lasered and then powder-coated black! Incl. LED license plate lighting with E-test mark. License plate size:  W-180xH-200 mm (suitable for Germany) or  ; W-210xH-170 mm (suitable for Austria) or  W-180xH-140 mm (suitable for Switzerland) or  W-170xH-170 mm (suitable for √ºfor Italy) orW-210xH-130 mm (suitable for France) orW-210xH-140 mm (suitable for Netherlands) Assembly is very easy , the license plate holder is screwed into the lower shock absorber mounting screw. This requires a longer screw, which is of course included in the scope of delivery (screw must be shortened if necessary). Since the Cult-Werk license plate holder has an extra short mounting foot compared to other license plate holders available on the market, it is visually much more appealing! Scope of delivery: - 1x side license plate holder - 1x LED license plate light incl. E-test mark (pre-assembled!) - 1x pan head screw, similar. ISO7380 ¬Ω‚Äú-20UNFx3.5‚Äú, 10.9 - 4x screws incl. nuts for license plate fastening THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!

The Cult-Werk side license plate holder with silent block bearing as well as GTü parts certificate for the listed license plate sizes and countries. Suitable for all Harley-Davidson Nightster models from 2022 onwards! The shortest license plate holder on the market guarantees you a TOP look! The license plate holder from Cult-Werk is Made of high-quality steel, CNC lasered and then black powder-coated! Incl. LED license plate lighting with E-test mark. License plate size:  W-180xH-200 mm (suitable for Germany) or  ; W-210xH-170 mm (suitable for Austria) or  W-180xH-140 mm (suitable for Switzerland) or  W-170xH-170 mm (suitable for √ºfor Italy) orW-210xH-130 mm (suitable for France) orW-210xH-140 mm (suitable for Netherlands) Assembly is very easy , the license plate holder is screwed into the lower shock absorber mounting screw. This requires a longer screw, which is of course included in the scope of delivery (screw must be shortened if necessary). Since the Cult-Werk license plate holder has an extra short mounting foot compared to other license plate holders available on the market, it is visually much more appealing! Scope of delivery: - 1x side license plate holder - 1x LED license plate light incl. E-test mark (pre-assembled!) - 1x pan head screw, similar. ISO7380 10.9 M12x70 - 4x screws incl. nuts for license plate fastening THE ASSEMBLY INSTRUCTIONS AND THE PARTS CERTIFICATE ARE AVAILABLE IN THE "DOWNLOADS" TAB PROVIDED!!!

The Cult-Werk side license plate holder with GT√ú parts certificate for the listed license plate sizes and countries. Suitable for all Harley-Davidson Dyna models (Street Bob, Street Bob Special, Low Rider, Wide Glide, Fat Bob & Switchback) from the year of manufacture 2008 to the last year of manufacture 2017! The shortest license plate holder on the market guarantees you a TOP look! The Cult-Werk license plate holder is made of high-quality steel, CNC lasered and then powder-coated black! Incl. LED license plate lighting with E-test mark. License plate size: W-180xH-200 mm (suitable for √ºfor Germany) or W-210xH-170 mm (suitable for √Austria) or W-180xH-140 mm (suitable for Switzerland) or W-170xH- 170 mm (suitable for Italy) orW-210xH-130 mm (suitable for France) orW-210xH-140 mm (suitable for Netherlands) The installation is very simple, the license plate holder is screwed onto the rear axle. This requires a special nut with collar, which is of course included in the scope of delivery. Since the Cult-Werk license plate holder has an extra short mounting foot compared to other license plate holders available on the market, it is visually much more appealing! Scope of delivery : - 1x side license plate holder - 1x LED license plate light incl. E-test mark (pre-assembled!) - 1x special stainless steel nut with collar M24x2- 1x anti-twist device using a worm screw - 4x screws including nuts for license plate fastening THE ASSEMBLY INSTRUCTIONS AND THE PARTS APPROVAL ARE IN THE TAB "DOWNLOADS" PROVIDED!!!

The Cult-Werk side license plate holder with GTü parts certificate for the listed license plate sizes and countries or FAKT test report for the Swiss license plate holder.  Suitable for all Harley-Davidson V Rod & Night Rod Special models from 2002 to 2017! The shortest license plate holder on the market guarantees you a TOP look! The license plate holder from Cult-Werk is made of high-quality steel, CNC lasered and then powder-coated black! Incl. LED license plate lighting with E-test mark. License plate size:  W-180xH-200 mm (suitable for Germany) or  ; W-210xH-170 mm (suitable for Austria) or  W-180xH-140 mm (suitable for Switzerland) or  W-170xH-170 mm (suitable for √ºfor Italy) orW-210xH-130 mm (variant 2 suitable for France) orW-210xH-140 mm (suitable for Netherlands) The assembly is very simple, the license plate holder is screwed into the lower shock absorber mounting screw. This requires a longer screw, which is of course included in the scope of delivery (screw must be shortened if necessary). Since the Cult-Werk license plate holder has an extra short mounting foot compared to other license plate holders available on the market, it is visually much more appealing! Scope of delivery: - 1x side license plate holder - 1x LED license plate light incl. E-test mark (pre-assembled!) - 1x M12 screw - 4x screws incl. nuts for license plate fastening THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!! INFO: The FAKT test report will be sent to you signed by us upon request and is therefore not available in the download area! < img src="https://www.cult-werk.com/media/98/22/cb/1688374191/pic_TUV-approved_02.png" alt="GTü Approved">

The Cult-Werk side license plate holder with GTú parts certificate for the listed countries and reasons. Suitable for all Harley-Davidson Softail models - not for the FXDR 114 - from 2018 onwards! (Street Bob, Low Rider, Fat Bob, Softail Slim, Softail Deluxe, Breakout, Fat Boy, Sport Glide & Heritage Classic - IMPORTANT: With the Sport Glide & Heritage Classic, the license plate holder can only be used without the cases be used!) The shortest license plate holder on the market guarantees you a TOP look! The license plate holder from Cult-Werk is made of high-quality steel, CNC Lasered and then powder-coated black! Incl. LED license plate lighting with E-test mark. License plate size: W-180xH-200 mm (suitable for √ºfor Germany) or W-210xH-170 mm (suitable for √Austria) or W-180xH-140 mm (suitable for Switzerland) or W-170xH- 170 mm (suitable for Italy) orW-210xH-130 mm (suitable for France) orW-210xH-140 mm (suitable for Netherlands) The installation is very simple, the license plate holder is screwed onto the rear axle. This requires a special nut with collar, which is of course included in the scope of delivery. Since the Cult-Werk license plate holder has an extra short mounting foot compared to other license plate holders available on the market, it is visually much more appealing! Scope of delivery : - 1x side license plate holder  - 1x LED license plate light incl. E-test mark (pre-assembled!) - 1x special stainless steel nut with collar M24x2 - 4x screws Includes nuts for license plate attachment < strong>THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!