Skip to main content

Average rating of 4 out of 5 stars

1 Review

License plate holder with TÜV (suitable for Harley-Davidson models: all Sportster)

Country & Size: Austria 210 x 170 mm | Productquality: perfect Cult-Werk quality
The Cult-Werk side license plate holder with silent block bearing as well as GTü parts certificate for the listed license plate sizes and countries.

Product information "License plate holder with TÜV (suitable for Harley-Davidson models: all Sportster)"

The Cult-Werk side license plate holder with silent block bearing as well as GTü parts certificate for the listed license plate sizes and countries. Suitable for all Harley-Davidson Sportster models! (IMPORTANT: The holder is 100% suitable for Sportster models from the year 2000 onwards. For older models, please check beforehand whether the model is listed based on the area of use so that no problems arise when registering!) /p>

Since the unsprung masses of Sportster models are particularly high, many of the license plate holders available on the market break. The silent block reduces these to a minimum and a long service life is guaranteed! The shortest license plate holder on the market guarantees you a TOP look! The Cult-Werk license plate holder is made of high-quality steel, CNC lasered and then powder-coated black! Incl. LED license plate lighting with E-test mark.

License plate size: 
W-180xH-200 mm (suitable for Germany) or  ;
W-210xH-170 mm (suitable for Austria) or 
W-180xH-140 mm (suitable for Switzerland) or 
W-170xH-170 mm (suitable for üfor Italy) or
W-210xH-130 mm (suitable for France) or
W-210xH-140 mm (suitable for Netherlands)

Assembly is very easy , the license plate holder is screwed into the lower shock absorber mounting screw. This requires a longer screw, which is of course included in the scope of delivery (screw must be shortened if necessary). Since the Cult-Werk license plate holder has an extra short mounting foot compared to other license plate holders available on the market, it is visually much more appealing!

Scope of delivery:
- 1x side license plate holder
- 1x LED license plate light incl. E-test mark (pre-assembled!)
- 1x pan head screw, similar. ISO7380 ½“-20UNFx3.5“, 10.9
- 4x screws incl. nuts for license plate fastening

THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!

GTü Approved

Cult-Werk

The team of Cult Werk, is composed of qualified, dedicated and dynamic employees and engineers, whose experience, in part over 25 years, creates a solid foundation for our company. Renowned companies from the vehicle and motorcycle sector rely on the quality of Cult Werk!
Manufacturer website

1 of 1 reviews

Average rating of 4 out of 5 stars


0%

100%

0%

0%

0%


Leave a review!

Share your experiences with other customers.


5 April 2020 09:16

Review with rating of 4 out of 5 stars

Super Halter

Der Halter an sich ist sehr gut. Bei der Montage drückt dieser leider gegen den Stoßdämpfer und der Lack ist abgeplatzt. Montageanleitung muss berichtigt werden. Gerade weil es LED Technik ist muss auf die polung geachtet werden. Sonst leuchtet da nichts.

Important note


Cult-werk.com and MEC Engineering GmbH, Cult-Werk® are not sponsored, associated, authorized, endorsed by, or affiliated in any way with Harley-Davidson Motor Company, LLC or Harley-Davidson Retail B.V. (www.harley-davidson.com). The Harley-Davidson name and, for example, the "Harley", "Sportster", "Softail" and "Nightster" marks are trademarks of Harley-Davidson Motor Company, LLC and all other products mentioned on this website are trademarks of their respective owners. Any mention of a brand name or other third party trademark is intended only to indicate that the Cult-Werk® units are intended as accessories or replacement parts for new/used Cult-Werk® units and is not an indication of an original product. Copyright / trademark infringements are not intended or implied. Translated with DeepL.com (free version)

Cult-werk.com and MEC Engineering GmbH, Cult-Werk® are not sponsored, associated, authorized, endorsed or affiliated in any way with Indian Motorcycle International, LLC (www.indianmotorcycle.com). The Indian name are trademarks of Indian Motorcycle International, LLC and all other products mentioned on this website are trademarks of their respective owners. Any mention of a third party brand name or other trademark is intended only to indicate that the Cult-Werk® units are intended as accessories or replacement parts and is not an indication of an original product. Copyright / trademark infringements are not intended or implied. Translated with DeepL.com (free version)

Simular Items

%
License plate holder with TÜV (suitable for Harley-Davidson models: Breakout 2013 - 2017)License plate holder with TÜV (suitable for Harley-Davidson models: Breakout 2013 - 2017)

Average rating of 0 out of 5 stars

License plate holder with TÜV (suitable for Harley-Davidson models: Breakout 2013 - 2017)
Prod. no.: HD-BRO020-A
The Cult-Werk side license plate holder with GTú parts certificate for the listed license plate sizes and countries. Suitable for all Harley-Davidson Breakout models from 2013 to 2017 as well as suitable for Harley-Davidson Rocker models from 2008 to 2011 ! The shortest license plate holder on the market guarantees you a TOP look! The Cult-Werk license plate holder is made of high-quality steel, CNC lasered and then powder-coated black! Incl. LED license plate lighting with E-test mark. License plate size: W-180xH-200 mm (suitable for √ºfor Germany) or W-210xH-170 mm (suitable for √Austria) or W-180xH-140 mm (suitable for Switzerland) or W-170xH- 170 mm (suitable for Italy) orW-210xH-130 mm (variant 2 suitable for France) orW-210xH-140 mm (suitable for the Netherlands) < p class="MsoNormal">The installation is very simple, the license plate holder is screwed onto the rear axle. This requires a special nut with collar, which is of course included in the scope of delivery. Since the Cult-Werk license plate holder has an extra short mounting foot compared to other license plate holders available on the market, it is visually much more appealing! Scope of delivery : - 1x side license plate holder - 1x LED license plate light incl. E-test mark (pre-assembled!) - 1x special stainless steel nut with collar M24x1.5 - 4x screws including nuts for license plate attachment THE ASSEMBLY INSTRUCTIONS AND THE PARTS CERTIFICATE ARE AVAILABLE A LITTLE DOWN IN THE "AVAILABLE DOWNLOADS" SECTION!!!

€278.10* €309.00*
%
License plate holder with TÜV (suitable for Harley-Davidson models: Dyna from 2008)License plate holder with TÜV (suitable for Harley-Davidson models: Dyna from 2008)

Average rating of 0 out of 5 stars

License plate holder with TÜV (suitable for Harley-Davidson models: Dyna from 2008)
Prod. no.: HD-DYN014-A
The Cult-Werk side license plate holder with GT√ú parts certificate for the listed license plate sizes and countries. Suitable for all Harley-Davidson Dyna models (Street Bob, Street Bob Special, Low Rider, Wide Glide, Fat Bob & Switchback) from the year of manufacture 2008 to the last year of manufacture 2017! The shortest license plate holder on the market guarantees you a TOP look! The Cult-Werk license plate holder is made of high-quality steel, CNC lasered and then powder-coated black! Incl. LED license plate lighting with E-test mark. License plate size: W-180xH-200 mm (suitable for √ºfor Germany) or W-210xH-170 mm (suitable for √Austria) or W-180xH-140 mm (suitable for Switzerland) or W-170xH- 170 mm (suitable for Italy) orW-210xH-130 mm (suitable for France) orW-210xH-140 mm (suitable for Netherlands) The installation is very simple, the license plate holder is screwed onto the rear axle. This requires a special nut with collar, which is of course included in the scope of delivery. Since the Cult-Werk license plate holder has an extra short mounting foot compared to other license plate holders available on the market, it is visually much more appealing! Scope of delivery : - 1x side license plate holder - 1x LED license plate light incl. E-test mark (pre-assembled!) - 1x special stainless steel nut with collar M24x2- 1x anti-twist device using a worm screw - 4x screws including nuts for license plate fastening THE ASSEMBLY INSTRUCTIONS AND THE PARTS APPROVAL ARE IN THE TAB "DOWNLOADS" PROVIDED!!!

€187.85* €289.00*
%
License plate holder with TÜV (suitable for Harley-Davidson models: VRSC V-Rod & Night Rod Special from 2002 - 2017)

Average rating of 0 out of 5 stars

License plate holder with TÜV (suitable for Harley-Davidson models: VRSC V-Rod & Night Rod Special from 2002 - 2017)
Prod. no.: HD-ROD012-A
The Cult-Werk side license plate holder with GTü parts certificate for the listed license plate sizes and countries or FAKT test report for the Swiss license plate holder.  Suitable for all Harley-Davidson V Rod & Night Rod Special models from 2002 to 2017! The shortest license plate holder on the market guarantees you a TOP look! The license plate holder from Cult-Werk is made of high-quality steel, CNC lasered and then powder-coated black! Incl. LED license plate lighting with E-test mark. License plate size:  W-180xH-200 mm (suitable for Germany) or  ; W-210xH-170 mm (suitable for Austria) or  W-180xH-140 mm (suitable for Switzerland) or  W-170xH-170 mm (suitable for √ºfor Italy) orW-210xH-130 mm (variant 2 suitable for France) orW-210xH-140 mm (suitable for Netherlands) The assembly is very simple, the license plate holder is screwed into the lower shock absorber mounting screw. This requires a longer screw, which is of course included in the scope of delivery (screw must be shortened if necessary). Since the Cult-Werk license plate holder has an extra short mounting foot compared to other license plate holders available on the market, it is visually much more appealing! Scope of delivery: - 1x side license plate holder - 1x LED license plate light incl. E-test mark (pre-assembled!) - 1x M12 screw - 4x screws incl. nuts for license plate fastening THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!! INFO: The FAKT test report will be sent to you signed by us upon request and is therefore not available in the download area! < img src="https://www.cult-werk.com/media/98/22/cb/1688374191/pic_TUV-approved_02.png" alt="GTü Approved">

Variants from €151.72*
€216.75* €289.00*
%
License plate holder with TÜV (suitable for Harley-Davidson models: Softail from 2018)License plate holder with TÜV (suitable for Harley-Davidson models: Softail from 2018)

Average rating of 0 out of 5 stars

License plate holder with TÜV (suitable for Harley-Davidson models: Softail from 2018)
Prod. no.: HD-BRO038-A
The Cult-Werk side license plate holder with GTú parts certificate for the listed countries and reasons. Suitable for all Harley-Davidson Softail models - not for the FXDR 114 - from 2018 onwards! (Street Bob, Low Rider, Fat Bob, Softail Slim, Softail Deluxe, Breakout, Fat Boy, Sport Glide & Heritage Classic - IMPORTANT: With the Sport Glide & Heritage Classic, the license plate holder can only be used without the cases be used!) The shortest license plate holder on the market guarantees you a TOP look! The license plate holder from Cult-Werk is made of high-quality steel, CNC Lasered and then powder-coated black! Incl. LED license plate lighting with E-test mark. License plate size: W-180xH-200 mm (suitable for √ºfor Germany) or W-210xH-170 mm (suitable for √Austria) or W-180xH-140 mm (suitable for Switzerland) or W-170xH- 170 mm (suitable for Italy) orW-210xH-130 mm (suitable for France) orW-210xH-140 mm (suitable for Netherlands) The installation is very simple, the license plate holder is screwed onto the rear axle. This requires a special nut with collar, which is of course included in the scope of delivery. Since the Cult-Werk license plate holder has an extra short mounting foot compared to other license plate holders available on the market, it is visually much more appealing! Scope of delivery : - 1x side license plate holder  - 1x LED license plate light incl. E-test mark (pre-assembled!) - 1x special stainless steel nut with collar M24x2 - 4x screws Includes nuts for license plate attachment < strong>THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!

Variants from €194.67*
€278.10* €309.00*