Skip to main content

Average rating of 0 out of 5 stars

Create review

License plate holder in the middle with TÜV (suitable for Harley-Davidson models: Fat Bob from 2018)

Version: incl. license plate light & 2 in 1 (rear- & breaklight)
The Cult-Werk central license plate holder including T√úV parts certificate suitable for all Harley-Davidson Fat Bob models from 2018!

Product information "License plate holder in the middle with TÜV (suitable for Harley-Davidson models: Fat Bob from 2018)"

The Cult-Werk central license plate holder incl. T√úV parts certificate suitable for all Harley-Davidson Fat Bob models from 2018 onwards! The holder adapts exactly in the middle to the shape of the original rear fender and therefore the original bracket can be removed! The license plate holder from Cult-Werk is made of high-quality steel, CNC lasered and then powder-coated black! The element in which the lighting is located is made of high-quality ABS plastic and milled on 5-axis CNC machines. Installation is very easy because the license plate holder is screwed into the original fender mounting points! This requires slightly longer screws, which are of course included in the scope of delivery.

IMPORTANT: Depending on the license plate size When adjusting and adjusting the holder, it is necessary to check the spring travel and limit it if necessary! The required spring travel limiters are included in delivery!

The following two versions are available for this central license plate holder:
- Version 1 = incl. LED license plate lighting with E-test mark, suitable for all license plate sizes
- Version 2 = incl. LED license plate lighting and LED 2 in 1 reverse & Brake light and small LED indicators on the outside (all with E-mark), suitable for all license plate sizes

THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!

GTú Approved

Cult-Werk

The team of Cult Werk, is composed of qualified, dedicated and dynamic employees and engineers, whose experience, in part over 25 years, creates a solid foundation for our company. Renowned companies from the vehicle and motorcycle sector rely on the quality of Cult Werk!
Manufacturer website

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Important note


Cult-werk.com and MEC Engineering GmbH, Cult-Werk® are not sponsored, associated, authorized, endorsed by, or affiliated in any way with Harley-Davidson Motor Company, LLC or Harley-Davidson Retail B.V. (www.harley-davidson.com). The Harley-Davidson name and, for example, the "Harley", "Sportster", "Softail" and "Nightster" marks are trademarks of Harley-Davidson Motor Company, LLC and all other products mentioned on this website are trademarks of their respective owners. Any mention of a brand name or other third party trademark is intended only to indicate that the Cult-Werk® units are intended as accessories or replacement parts for new/used Cult-Werk® units and is not an indication of an original product. Copyright / trademark infringements are not intended or implied. Translated with DeepL.com (free version)

Cult-werk.com and MEC Engineering GmbH, Cult-Werk® are not sponsored, associated, authorized, endorsed or affiliated in any way with Indian Motorcycle International, LLC (www.indianmotorcycle.com). The Indian name are trademarks of Indian Motorcycle International, LLC and all other products mentioned on this website are trademarks of their respective owners. Any mention of a third party brand name or other trademark is intended only to indicate that the Cult-Werk® units are intended as accessories or replacement parts and is not an indication of an original product. Copyright / trademark infringements are not intended or implied. Translated with DeepL.com (free version)

Simular Items

License plate holder with TÜV (suitable for Harley-Davidson models: Breakout 2013 - 2017) License plate holder with TÜV (suitable for Harley-Davidson models: Breakout 2013 - 2017)

Average rating of 0 out of 5 stars

License plate holder with TÜV (suitable for Harley-Davidson models: Breakout 2013 - 2017)
Prod. no.: HD-BRO020-A
The Cult-Werk side license plate holder with GTú parts certificate for the listed license plate sizes and countries. Suitable for all Harley-Davidson Breakout models from 2013 to 2017 as well as suitable for Harley-Davidson Rocker models from 2008 to 2011 ! The shortest license plate holder on the market guarantees you a TOP look! The Cult-Werk license plate holder is made of high-quality steel, CNC lasered and then powder-coated black! Incl. LED license plate lighting with E-test mark. License plate size: W-180xH-200 mm (suitable for √ºfor Germany) or W-210xH-170 mm (suitable for √Austria) or W-180xH-140 mm (suitable for Switzerland) or W-170xH- 170 mm (suitable for Italy) orW-210xH-130 mm (variant 2 suitable for France) orW-210xH-140 mm (suitable for the Netherlands) < p class="MsoNormal">The installation is very simple, the license plate holder is screwed onto the rear axle. This requires a special nut with collar, which is of course included in the scope of delivery. Since the Cult-Werk license plate holder has an extra short mounting foot compared to other license plate holders available on the market, it is visually much more appealing! Scope of delivery : - 1x side license plate holder - 1x LED license plate light incl. E-test mark (pre-assembled!) - 1x special stainless steel nut with collar M24x1.5 - 4x screws including nuts for license plate attachment THE ASSEMBLY INSTRUCTIONS AND THE PARTS CERTIFICATE ARE AVAILABLE A LITTLE DOWN IN THE "AVAILABLE DOWNLOADS" SECTION!!!

€309.00*
License plate holder with TÜV (suitable for Harley-Davidson models: Softail from 2018) License plate holder with TÜV (suitable for Harley-Davidson models: Softail from 2018)

Average rating of 0 out of 5 stars

License plate holder with TÜV (suitable for Harley-Davidson models: Softail from 2018)
Prod. no.: HD-BRO038-A
The Cult-Werk side license plate holder with GTú parts certificate for the listed countries and reasons. Suitable for all Harley-Davidson Softail models - not for the FXDR 114 - from 2018 onwards! (Street Bob, Low Rider, Fat Bob, Softail Slim, Softail Deluxe, Breakout, Fat Boy, Sport Glide & Heritage Classic - IMPORTANT: With the Sport Glide & Heritage Classic, the license plate holder can only be used without the cases be used!) The shortest license plate holder on the market guarantees you a TOP look! The license plate holder from Cult-Werk is made of high-quality steel, CNC Lasered and then powder-coated black! Incl. LED license plate lighting with E-test mark. License plate size: W-180xH-200 mm (suitable for √ºfor Germany) or W-210xH-170 mm (suitable for √Austria) or W-180xH-140 mm (suitable for Switzerland) or W-170xH- 170 mm (suitable for Italy) orW-210xH-130 mm (suitable for France) orW-210xH-140 mm (suitable for Netherlands) The installation is very simple, the license plate holder is screwed onto the rear axle. This requires a special nut with collar, which is of course included in the scope of delivery. Since the Cult-Werk license plate holder has an extra short mounting foot compared to other license plate holders available on the market, it is visually much more appealing! Scope of delivery : - 1x side license plate holder  - 1x LED license plate light incl. E-test mark (pre-assembled!) - 1x special stainless steel nut with collar M24x2 - 4x screws Includes nuts for license plate attachment < strong>THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!

Variants from €216.30*
€309.00*
License plate holder with TÜV (suitable for Harley-Davidson models: FXDR from 2019) License plate holder with TÜV (suitable for Harley-Davidson models: FXDR from 2019)

Average rating of 0 out of 5 stars

License plate holder with TÜV (suitable for Harley-Davidson models: FXDR from 2019)
Prod. no.: HD-BRO059-A
The Cult-Werk side license plate holder incl. GTú parts certificate for the listed license plate sizes and countries. The holder is suitable for all Harley-Davidson FXDR from 2019 onwards! The shortest license plate holder on the market guarantees you a TOP look! The license plate holder from Cult-Werk is made of high-quality steel, CNC lasered and then powder-coated black! Incl. LED license plate lighting with E-test mark. License plate size: W-180xH-200 mm (suitable for √ºfor Germany) or W-210xH-170 mm (suitable for √Austria) or W-180xH-140 mm (suitable for Switzerland) or W-170xH- 170 mm (suitable for Italy) orW-210xH-130 mm (suitable for France) orW-210xH-140 mm (suitable for Netherlands) The installation is very simple, the license plate holder is attached to the swing arm instead of the original bracket that goes around the rear wheel. The required assembly material is of course included in the scope of delivery. Since the Cult-Werk license plate holder has an extra short mounting foot compared to other license plate holders available on the market, it is visually much more appealing! Scope of delivery : - 1x side license plate holder - 1x LED license plate light incl. E-test mark (pre-assembled!) - 4x screws incl. nuts for license plate fastening- 1x pan head screw 5/16" THE ASSEMBLY INSTRUCTIONS AND THAT PARTS REPORTS ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!

€319.00*