Insertion frame AT

The Cult-Werk slide-in frame for the license plate for the listed license plate sizes and countries! Suitable for various Harley-Davidson models. The Cult-Werk slide-in frame is made of high-quality steel, CNC laser-cut and then powder-coated in black! License plate size: W-180xH-200 mm (suitable for Germany) or W-210xH-170 mm (suitable for Austria) Scope of delivery: - 1x slide-in frame in the selected size - 1x adapter for license plate illumination incl. 2 screws PLEASE SPECIFY WHEN ORDERING WHETHER THE ADAPTER PIECE IS REQUIRED FOR THE LICENSE PLATE LIGHT OR NOT!

License plate holder witha milled plate including insert frame for the license plate. Suitable for allHarley-Davidson Sportster S models from 2021 including GTü partial report! The shortest license plate holder on the market guarantees you a TOP look! The Cult-Werk license plate holder is made of high-quality steel, CNC lasered and then powder-coated black! Incl. LED license plate lighting with E-test mark. License plate size:  W-180xH-200 mm (suitable for Germany) or W-210xH-170 mm (suitable for Austria) other sizes with insert frames will follow... The assembly is very easy, the license plate holder is included of the swing arm attached to the top hole of the original lighting bracket. A suitable screw is required, which is of course included in the scope of delivery! Since the Cult-Werk license plate holder has an extra short mounting foot compared to other license plate holders available on the market, it is visually much more appealing! Scope of delivery: - 1x side license plate holder - 1x LED license plate light incl. E-test mark (pre-assembled!) - 1x M8 screw - 4x screws incl. nuts for license plate fastening THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!

The Cult-Werk side license plate holder with GT√ú parts certificate for the listed license plate reasons and countries as well as a milled plate including insert frame for the license plate.  Suitable for all Harley-Davidson Dyna models (Street Bob, Street Bob Special, Low Rider, Wide Glide, Fat Bob & Switchback) from the year of manufacture 2008 to the last year of manufacture 2017! The shortest license plate holder on the market guarantees you a TOP look! The Cult-Werk license plate holder is made of high-quality steel, CNC lasered and then powder-coated black! Incl. LED license plate lighting with E-test mark. License plate size:  W-180xH-200 mm (suitable for √ºfor Germany) orW-210xH-170 mm (suitable for √Austria) other sizes with slide-in frames will follow... Installation is very simple, the license plate holder is screwed onto the rear axle. This requires a special nut with collar, which is of course included in the scope of delivery. Since the Cult-Werk license plate holder has an extra short mounting foot compared to other license plate holders available on the market, it is visually much more appealing! Scope of delivery : - 1x side license plate holder with insert frame - 1x LED license plate light incl. E-test mark (pre-assembled!) - 1x special stainless steel nut with collar M24x2- 1x Anti-twist protection using a worm screw - 2x grub screws for license plate attachment THE ASSEMBLY INSTRUCTIONS AND THE PARTS APPROVAL ARE IN THE DOWNLOADS TAB PROVIDED!!!

The Cult-Werk side license plate holder including GTú parts certificate for the listed license plate sizes and countries and milled plate including insert frame for the license plate strong>. The holder is suitable for all Harley-Davidson FXDR from 2019 onwards! The shortest license plate holder on the market guarantees you a TOP look! The license plate holder from Cult-Werk is made of high-quality steel, CNC lasered and then powder-coated black! Incl. LED license plate lighting with E-test mark. License plate size:  W-180xH-200 mm (suitable for √ºfor Germany) orW-210xH-170 mm (suitable for √Austria) other sizes with slide-in frames will follow... Installation is very simple, the license plate holder is attached to the swing arm instead of the original bracket that goes around the rear wheel. The required assembly material is of course included in the scope of delivery. Since the Cult-Werk license plate holder has an extra short mounting foot compared to other license plate holders available on the market, it is visually much more appealing! Scope of delivery : - 1x side license plate holder incl. insert frame - 1x LED license plate light incl. E-test mark (pre-assembled!) - 2x grub screws for license plate fastening- 3x pan head screw 5 /16" THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!< /strong>

The Cult-Werk side license plate holder suitable for all Indian Scout models from year 2015 to current for the listed license plate sizes and L√ §nder and a milled plate including insert frame for the license plate and GTü parts certificate. The shortest license plate holder on the market guarantees you a TOP look! The license plate holder from Cult-Werk is made of high-quality steel, CNC lasered and then powder-coated black! Incl. LED license plate lighting with E-test mark. License plate size:  W-180xH-200 mm (suitable for √ºfor Germany) orW-210xH-170 mm (suitable for √Austria) other sizes with slide-in frames will follow... Installation is relatively easy because the license plate holder is screwed onto the rear axle. To do this, jack up the Indian and loosen the axle nut on the right side. Pull out the axle and then remove the original rectangular washer (only on the left side)! Attach our license plate holder with the axle and screw it back on the right side with the original washer and axle nut. We always recommend using some medium-strength screw locking material! Since the Cult-Werk license plate holder has an extra short mounting foot compared to other license plate holders available on the market, it is visually much more appealing! Scope of delivery : - 1x side license plate holder incl. insert frame - 1x LED license plate light incl. E-test mark (pre-assembled!)  - 2x grub screws for license plate attachment THE PARTS REPORT IS AVAILABLE IN THE "DOWNLOADS" TAB!!!

The Cult-Werk side license plate holder with GTú parts certificate for the listed license plate sizes and countries as well as a milled plate including insert frame for the license plate!Suitable for all Harley-Davidson Breakout models from 2013 to 2017 and also suitable for Harley-Davidson< sup> Rocker models from 2008 to 2011! The shortest license plate holder on the market guarantees you a TOP look! The license plate holder from Cult-Werk is made of high-quality steel, CNC lasered and then powder-coated black! Incl. LED license plate lighting with E-test mark. License plate size:  W-180xH-200 mm (suitable for √ºfor Germany) orW-210xH-170 mm (suitable for √Austria) other sizes with slide-in frames will follow... Installation is very simple, the license plate holder is screwed onto the rear axle. This requires a special nut with collar, which is of course included in the scope of delivery. Since the Cult-Werk license plate holder has an extra short mounting foot compared to other license plate holders available on the market, it is visually much more appealing! Scope of delivery : - 1x side license plate holder incl. insert frame - 1x LED license plate light incl. E-test mark (pre-assembled!) - 1x special stainless steel nut with collar M24x1.5 - 2x grub screws for license plate attachment THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!! < /p>

The Cult-Werk side license plate holder with silent block bearing as well as GTü parts certificate for the listed license plate sizes and countries - including insert frame. Suitable for all Harley-Davidson Nightster models from 2022 onwards! The shortest license plate holder on the market guarantees you a TOP look! The license plate holder from Cult-Werk is Made of high-quality steel, CNC lasered and then black powder-coated! Incl. LED license plate lighting with E-test mark. License plate size:  W-180xH-200 mm (suitable for Germany) or W-210xH-170 mm (suitable for Austria) other sizes with insert frames will follow... The assembly is very easy, the license plate holder is included screwed to the lower shock absorber mounting screw. This requires a longer screw, which is of course included in the scope of delivery (screw must be shortened if necessary). Since the Cult-Werk license plate holder has an extra short mounting foot compared to other license plate holders available on the market, it is visually much more appealing! Scope of delivery: - 1x side license plate holder incl. insert frame - 1x LED license plate light incl. E-test mark (pre-assembled!) - 1x pan head screw, similar. ISO7380 70.9 M12x70 - 2x grub screws for license plate fastening THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!

The Cult-Werk side license plate holder with GTú parts certificate for the listed license plate sizes and countries as well as a milled plate including insert frame for the license plate!Suitable for all Harley-Davidson Breakout models from 2013 to 2017 and also suitable for Harley-Davidson< sup> Rocker models from 2008 to 2011! The shortest license plate holder on the market guarantees you a TOP look! The license plate holder from Cult-Werk is made of high-quality steel, CNC lasered and then powder-coated black! Incl. LED license plate lighting with E-test mark. License plate size:  W-180xH-200 mm (suitable for √ºfor Germany) orW-210xH-170 mm (suitable for √Austria) other sizes with slide-in frames will follow... Installation is very simple, the license plate holder is screwed onto the rear axle. This requires a special nut with collar, which is of course included in the scope of delivery. Since the Cult-Werk license plate holder has an extra short mounting foot compared to other license plate holders available on the market, it is visually much more appealing! Scope of delivery : - 1x side license plate holder incl. insert frame - 1x LED license plate light incl. E-test mark (pre-assembled!) - 1x special stainless steel nut with collar M24x1.5 - 2x grub screws for license plate attachment THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!! < /p>

The Cult-Werk side license plate holder with GTü parts certificate for the listed license plate sizes and countries and a milled plate including insert frame for the license plate. Suitable for all Harley-Davidson V Rod & Night Rod Special models from 2002 to 2017! The shortest license plate holder on the market guarantees you a TOP look! The Cult-Werk license plate holder is made of high-quality steel, CNC lasered and then powder-coated black! Incl. LED license plate lighting with E-test mark. License plate size:  W-180xH-200 mm (suitable for Germany) or W-210xH-170 mm (suitable for Austria) other sizes with insert frames will follow... The assembly is very easy, the license plate holder is included screwed to the lower shock absorber mounting screw. This requires a longer screw, which is of course included in the scope of delivery (screw must be shortened if necessary). Since the Cult-Werk license plate holder has an extra short mounting foot compared to other license plate holders available on the market, it is visually much more appealing! Scope of delivery: - 1x side license plate holder incl. plate with insert frame - 1x LED license plate light incl. E-test mark (pre-assembled!) - 1x M12 screw - 2x grub screws for license plate fastening THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!

The Cult-Werk side license plate holder with GTú parts certificate for the listed countries as well as greens and a milled plate including insert frame for ºfor the license plate. Suitable for all Harley-Davidson Softail models - not for the FXDR 114 - from Year of construction 2018! (Street Bob, Low Rider, Fat Bob, Softail Slim, Softail Deluxe, Breakout, Fat Boy, Sport Glide & Heritage Classic - IMPORTANT: With the Sport Glide & Heritage Classic, the license plate holder can only be used without the cases be used!) The shortest license plate holder on the market guarantees you a TOP look! The license plate holder from Cult-Werk is made of high-quality steel, CNC Lasered and then powder-coated black! Incl. LED license plate lighting with E-test mark. License plate size:  W-180xH-200 mm (suitable for √ºfor Germany) orW-210xH-170 mm (suitable for √Austria) other sizes with slide-in frames will follow... Installation is very simple, the license plate holder is screwed onto the rear axle. This requires a special nut with collar, which is of course included in the scope of delivery. Since the Cult-Werk license plate holder has an extra short mounting foot compared to other license plate holders available on the market, it is visually much more appealing! Scope of delivery : - 1x side license plate holder incl. insert frame - 1x LED license plate light incl. E-test mark (pre-assembled!) - 1x special stainless steel nut with collar M24x2 - 2x grub screws for license plate attachment THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!! < /span>