The long belt guard from Cult-Werk is delivered in black and gives your motorcycle a cool look. All holes and millings are milled on state-of-the-art 5-axis CNC machining centers and the part is then powder-coated black!

100% precisely fitting metal part made of high-quality steel, CNC lasered & black powder coated. Complete mounting material is included. Is screwed into the threaded inserts in the frame. No adjustment work necessary! IMPORTANT: The front spoiler will be delivered with the new logo as shown in the raw part pictures!!

The front fender from Cult-Werk is a 100% precisely fitting ABS plastic part - NOT GRP! No adjustment work necessary! Suitable for all Harley-Davidson Sportster 48 up to 2015! This fender can be painted. Minimal painting effort due to perfect surface quality. All holes and millings are milled on the most modern 5-axis CNC machining centers, so that the fender only needs to be exchanged for the original fender. The fender is top-notch, fits perfectly and provides a clear view of the front wheel. Original fit - New design. ATTENTION - Also available in black and glossy! This means you no longer have to have the fender painted. (Item number: HD-SPO075) THE ASSEMBLY INSTRUCTIONS AND THE PARTS ARE APPROVED AVAILABLE IN THE DOWNLOADS TAB!!!

The Cult-Werk foot pegs "Racing" (2 pieces as shown) suitable for Harley-Davidson Sportster models from 2004 to the present! The footrests were milled from an aluminum part and then powder-coated with a glossy black finish. In addition, an elaborately designed rubber with Cult-Werk lettering was produced to ensure a perfect grip and to round off the set visually perfectly! The footrests are attached to the motorcycle just like the original parts!

The Cult-Werk fork cover kit (6 pieces) consisting of the top fork cover, fork caps and folding linings. Fork caps: Very flat design üHung, therefore also fits in conjunction with drag bar handlebars! The Cult-Werk fork caps cover the fork tubes (chrome) above the fork clamp. The caps are securely fastened with a hidden set screw. Made from high-quality aluminum, CNC milled on the most modern 5-axis machining centers. Glossy black powder-coated! Upper fork cover: This 2-piece fork cover kit from Cult-Werk covers the upper fork tubes between the upper and lower fork clamps. The entire fork appears beefier and completely black. Easy construction. The fork covers are simply pushed over the fork tubes and fixed with a set screw. The fork covers are flush with the upper and lower fork bridges. Made from high-quality aluminum, CNC milled on the most modern 5-axis machining centers. Glossy black powder-coated! Folding pads: 1 pair of folding pads in black, suitable for all Harley-Davidson Sportster models with 49mm fork tubes. e.g.: 48, Iron etc. These bobber boots protect and cover the fork tubes below the lower fork clamp. This is how you achieve a completely black and beefier fork look!

The Cult-Werk side license plate holder with silent block bearing as well as GTü parts certificate for the listed license plate sizes and countries. Suitable for all Harley-Davidson Sportster models! (IMPORTANT: The holder is 100% suitable for Sportster models from the year 2000 onwards. For older models, please check beforehand whether the model is listed based on the area of use so that no problems arise when registering!) /p> Since the unsprung masses of Sportster models are particularly high, many of the license plate holders available on the market break. The silent block reduces these to a minimum and a long service life is guaranteed! The shortest license plate holder on the market guarantees you a TOP look! The Cult-Werk license plate holder is made of high-quality steel, CNC lasered and then powder-coated black! Incl. LED license plate lighting with E-test mark. License plate size:  W-180xH-200 mm (suitable for Germany) or  ; W-210xH-170 mm (suitable for Austria) or  W-180xH-140 mm (suitable for Switzerland) or  W-170xH-170 mm (suitable for √ºfor Italy) orW-210xH-130 mm (suitable for France) orW-210xH-140 mm (suitable for Netherlands) Assembly is very easy , the license plate holder is screwed into the lower shock absorber mounting screw. This requires a longer screw, which is of course included in the scope of delivery (screw must be shortened if necessary). Since the Cult-Werk license plate holder has an extra short mounting foot compared to other license plate holders available on the market, it is visually much more appealing! Scope of delivery: - 1x side license plate holder - 1x LED license plate light incl. E-test mark (pre-assembled!) - 1x pan head screw, similar. ISO7380 ¬Ω‚Äú-20UNFx3.5‚Äú, 10.9 - 4x screws incl. nuts for license plate fastening THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!

The headlight from Cult-Werk is suitable for all Harley-Davidson models where it is attached to the middle of the lower fork bridge with a screw. In addition, our side speedometer holder (HD-SPO037) must be used on models to create enough space for the significantly larger headlight! 7" H4 headlight in a black matt metal housing with prism reflector and clear lens for optimal light output. Very simple and quick installation, simply exchange for the original Harley headlight! < p class="MsoNormal">Includes 12V H4 60/55 W bulb and parking light. Total diameter 205 mm and depth 120 mm. Dimensions of bracket: 20x32x60 mm. With ECE / T√úV. Cable assignment:H4 bulb 4 cables in black case: Thick black cable = ground Yellow cable = low beam White cable = high beam Thin black cable  = additional lighting ( if necessary) Separate yellow cable for the H4 bulb for connection as an additional light (if necessary) 2 cables for Parking light: Black cable = ground Yellow cable = plus

The mirror set 'ÄûRound'Äú from Cult-Werk in black gives your motorcycle a super cool look. It is made of aluminum and black anodized! The elegant universal mirrors are very well adjustable thanks to various joints and are suitable for mounting above or below the handlebars. Come E-test mark ‚Äì therefore FREE OF REGISTRATION ! Product specifications: Diameter = 102mm, stem length to joint = 150mm & Handle length to threaded bolt: 180mm Scope of delivery: 2 pieces (left and right) incl. adapter pieces for fastening