Complete Cult-Werk rear conversion "Custom" including mounting kit suitable for Harley-Davidson Touring models from 2014 (Street Glide, Road Glide & Road King - also special Versions as well as Ultra and Limited)! IMPORTANT: The rear conversion NOW comes with a wiring harness including a resistor for the correct flashing frequency! The conversion is therefore absolutely PLUG AND PLAY!The original license plate lighting must be used and connected to the wiring harness on the existing wires (red & black)! This one Cult-Werk rear conversion is an ABS plastic part and is CNC milled on the most modern 5-axis machining centers! This ensures that these parts are of original equipment quality. No cheap GRP! You can have the plastic part painted immediately in a paintable version, which in turn is very cheap because it is a perfect surface! The complete conversion kit consists of a rear fender including a mounting kit as well as integrated LED tail and brake lights and indicators. The rear fender "Custom" V2 was visually very elaborately designed! The Cult-Werk rear is characterized by its very easy assembly. It is best to remove the side cases at the rear before assembly, then mount the ABS rear fender over the original metal fender and fasten it with the original seat screws! In addition, the supplied sheet metal holders are screwed on to attach the fender to the frame. Before final assembly of the ABS fender, the LED lights must be attached (these must be glued in - silicone or any other adhesive) and the wiring and laying of the cable harness must be carried out. The following two surface variants are available for this rear conversion: - Paintable (Minimal painting effort 'Äì as perfect surface quality! The fender is delivered ready for painting and can basically √§Can be painted immediately!) - Glossy black (No longer needs to be painted - so you save the entire painting costs! Remove the protective film and the fender shines in glossy black!) The scope of delivery includes the following parts:- ABS rear fender- 6x LED tail and brake lights 2 in 1 (already on the wiring harness)- 4x LED Indicator (already on the wiring harness)- Mounting material- 2x holders for stiffening- Wiring harness incl. resistor and plug = Plug and Play  THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!

The Cult-Werk side cover set "Custom" suitable for all Harley-Davidson Touring models from 2009 to the present! (Road Glide, Street Glide & Road King) The covers are ABS plastic parts and are CNC machined on the most modern 5-axis machining centers äst! This ensures that these parts are of original equipment quality. It's not a cheap GRP! All mounting material is included for assembling the set and they can be exchanged for the original small side covers in just a few minutes! This creates a nice, continuous line all the way to the cases. The following two surface variants are available for these side covers: - Painting method äable (Minimal painting effort because perfect surface finish! The side covers are delivered ready for painting and can basically be painted immediately!) - Glossy black (No longer needs to be painted - This saves you the entire cost of painting! Remove the protective film and the side covers shine in glossy black!) THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!

Suitable for all Harley-Davidsons from 2017 onwards with the Millwaukee-Eight (M8) engine (107, 114 & 117)! Milled from high-quality aluminum on the most modern 5-axis machining centers. The Cult-Werk ignition cover (timer cover) is anodized black and comes with the Cult-Werk logo. The look and design is then milled into the finished anodized part on state-of-the-art 5-axis machining centers. It can easily be exchanged for the original part and thus greatly enhances your Breakout.

This Cult-Werk "Custom" front spoiler is suitable for all Harley-Davidson Touring models from year 2021 up to now with the original small crash bar (Road Glide, Street Glide & Road King)! The spoiler is an ABS plastic part and is CNC milled on the most modern 5-axis machining centers! This ensures that these parts are of original equipment quality. It's not a cheap GRP! A new metal holder and all mounting materials are included for mounting the spoiler and it can be exchanged for the original radiator cover in just a few minutes! The following two surface variants are available Available with this front spoiler: - Can be painted (Minimal painting effort - because the surface is perfect! The front spoiler is delivered ready for painting and can basically be painted immediately! ) - Glossy black (No longer needs to be painted - so you save the entire painting costs! Remove the protective film and the front spoiler shines in glossy black!) IMPORTANT INFORMATION: - The spoiler is delivered without grille! If there are grilles, please leave a short comment on the order completion page and we will be happy to pack some for your order! THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!

Suitable for all Harley-Davidson models with 1 inch handlebars and electronic throttle pickup! The handlebar grips from Cult-Werk are delivered in black and give your Motorcyle a cool look. All holes and millings are milled on the most modern 5-axis CNC machining centers and the part is then powder-coated black! The following two versions are available for these handlebar grips Available: - without milling (the handles are supplied with pure black end caps) - can be found in the shop with the item number HD-UNI006 - with Milling (the handles are delivered with the CWC logo milled into the end caps)

The air filter cover „Racing“ from Cult-Werk is suitable for all Harley-Davidson Touring models from 2017 with Millwaukee-Eight 107 engine and makes a difference Add a style element to the ugly original air filter! This saves you a new air filter and also the TÜV registration. This cover is designed to fit exactly onto the original air filter. 100% precisely fitting ABS plastic part - NO GRP! No adjustment work necessary! All holes and millings are milled on the most modern 5-axis CNC machining centers, so that the air filter cover only needs to be replaced with the original air filter cover. The air filter cover is TOP processed, fits perfectly and turns the boring original air filter into a cool part in the popular old school style with fins! The following two surface variants are available for this cover :- Can be painted (Minimal painting effort because the surface is perfect! The lid is delivered ready for painting and can basically be painted immediately!) - Black glossy änzend (No longer needs to be painted - so you save the entire painting costs! Remove the protective film and the lid shines in glossy black! THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!< /span>

Suitable for all Harley-Davidson Touring models from 2018 onwards (Street Glide, Street Glide Special, Road Glide, Road Glide Special, Road King, Road King Special, Ultra Limited, etc. ...)! Milled and lasered from high-quality aluminum on the most modern 5-axis machining centers. The Cult-Werk clutch cover (Derby Cover) is anodized black. The look and design is then milled and lasered into the finished anodized part on state-of-the-art 5-axis machining centers. It can easily be exchanged for the original part and thus greatly enhances your Harley.

The front fender from Cult-Werk suitable for Harley-Davidson Touring models from 2014 onwards for a sportier look. It is Shorter, narrower and clears the view of the front wheel. There are 3 air inlets on each side that have been adapted to the look of the motorcycle. Grilles to glue in for the air inlets are included! The part gives your motorcycle a clean and cool look! This front fender is a 100% perfect fit ABS plastic part, NOT a cheap GRP and therefore offers a 100% perfect fit! No adjustment work necessary! All holes and millings are milled on the most modern 5-axis CNC machining centers, so that the fender only needs to be exchanged for the original fender. The fender is top-notch, fits perfectly and provides a clear view of the front wheel. Original fit - new design. The following two surface variants are available for this fender: - Can be painted (minimal painting effort - perfect Surface quality! The fender is delivered ready for painting and can basically be painted immediately!) - Glossy black (No longer needs to be painted - so you save the entire painting costs! Remove the protective film and the fender shines in glossy black!) In addition, the fenders are available for different inch sizes! After you have decided on a surface variant, select the desired size. THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB PROVIDED!!!

This Cult-Werk headlight mask "Bad Look" is suitable for all Harley-Davidson Touring Road Glide‚Ñ¢ models from 2015 (Road Glide‚Ñ¢, Road Glide‚Ñ¢ Special, Road Glide‚Ñ¢ Ultra & CVO‚Ñ¢ Road Glide‚Ñ¢). The mask is an ABS plastic part and is milled on the most modern 5-axis CNC machining centers! This ensures that these parts are of original equipment quality. No cheap GRP! You can have the plastic parts painted immediately, which in turn saves costs because it is a perfect surface and no preparation or reworking of the parts is required! To assemble the headlight mask: This basically gets stuck in the Fehring by itself. Nevertheless, a high-quality assembly adhesive is included with which the mask is glued to the headlight at four adhesive points. Important: The glue should dry for 12 hours at room temperature (see application images in the product images)! The following two surface variants are available for this headlight mask: - Can be painted (Minimal painting effort because the surface is perfect! The mask is delivered ready for painting and can basically be painted immediately!) - Glossy black (no longer needs to be painted - so you save the entire painting costs! Remove the protective film and the mask shines in glossy black!) < span style="color: #ff0000;">THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!

These axle covers from Cult-Werk are suitable for all Harley-Davidson Softail models from 2008 to 2017, V-Rod / Night Rod & Muscle models from 2002 to 2017, Touring models from 2008 and Dyna models from 2007 to 2017 and cover the wheel nut on one side and the thru axle on the other side of the front rim. The covers are clamped firmly and securely using a hidden threaded pin and create a neat and clean look. Made of high-quality aluminum, CNC milled on the most modern 5-axis machining centers. Color: black-glossy powder-coated, scope of delivery: 2 pieces The following two versions are available for these axle covers: - without milling (the covers are delivered in pure black) - with milling (the covers are supplied with Delivered with frozen CWC logo)

This Cult-Werk windshield "Racing" is suitable for Harley-Davidson Touring Road Glide models built from 2015 (Road Glide, Road Glide Special, Road Glide Ultra & CVO Road Glide). < p>The windshield is an ABS plastic part and is CNC milled on the most modern 5-axis machining centers! This ensures that these parts are of original equipment quality. No cheap GRP! You can have the plastic parts painted immediately, which is very cheap because the surface is perfect and no preparation or reworking of the parts is required! Installing the shield is not complicated as it is simply exchanged for the original one! The following two surface variants are available for this windshield: - Can be painted (Minimal painting effort because the surface is perfect! The sign is delivered ready for painting and can basically be painted immediately!) - Glossy black (No longer needs to be painted - thus you save the entire painting costs! Remove the protective film and the sign shines in glossy black!) THE ASSEMBLY INSTRUCTIONS ARE IN THE TAB “DOWNLOADS” PROVIDED!!!

This pop-up tank cap in ultra-flat design with a right-hand thread and ventilation suitable for all Harley-Davidson tanks from 1996 onwards. (Dyna, Softail, Heritage, Fatboy, Touring etc. ...) (The exception is models that have a ventilation pipe in the tank neck, which rests against the locking of the pop-up function in the middle of the lid. It's best to check beforehand, the R may have to be used ötube can be flexed. Most of the time it is enough to move the locking pin on the side where it touches the tube a little so that it is flush with the guide there. Or you can Grind the split pin a little at both ends so that it doesn't protrude over the guide!) The special thing about the high-quality lid equipped with a seal is the retractable knurled screw with pop -Up function. If you press the closed tank cap with your thumb, the knurled screw can be recessed by turning it 90°. The lid is now ultra-flat and has a classic smooth look. Ma ße: external diameter 60 mm, height with countersunk knurled screw 36 mm, diameter of the knurled screw 38 mm, height of the knurled screw 9 mm. Thread diameter approx. 45 mm, thread depth approx. 28 mm