The dash cover from Cult-Werk fits all Harley-Davidson Low Rider S, Low Rider ST from year of manufacture 2018 and on Breakout 117 from year of manufacture 2023!The part gives your motorcycle a clean, cool and flatter look on the tank and is needed as a replacement for the original cover if the fittings are relocated to the headlight mask with our offset! This cover is a 100% precisely fitting ABS plastic part - NOT a cheap GRP! All holes and millings are milled on the most modern 5-axis CNC machining centers! When installing models from 2018 to 2020, it is necessary to shorten the holders for the original dash cover and then holes must be drilled - then the cover is included attached to the new bracket supplied (Details can be found in the assembly instructions!). On the newer models there is an additional retaining bracket that is screwed to the original bracket so that the screw connection goes further up! The following surfaces The following variants are available for this dash cover:- Can be painted (Minimal painting effort, because the surface is perfect! The cover is delivered ready for painting and can basically be used immediately be painted!)- Glossy black (No longer needs to be painted - so you save the entire painting costs! Remove the protective film and the cover shines in glossy black!) THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!

The front fender from Cult-Werk suitable for Harley-Davidson Low Rider S models from 2018 helps create a sportier look . It is shorter, narrower and clears the view of the front wheel. The part gives your motorcycle a clean and cool look! This fender is a 100% precisely fitting ABS plastic part - NOT a cheap GRP! No adjustment work required! All holes and millings are milled on the most modern 5-axis CNC machining centers, so that the fender only needs to be exchanged for the original. Original fit - new design with indicated air inlets including grilles to cover the openings. The following surface variant is available for this front fender:- Can be painted (Minimal painting effort because the surface is perfect! The front spoiler is delivered ready for painting and can basically be painted immediately!) - Glossy black (no longer required painted - so you save the entire painting costs! Remove the protective film and the front spoiler shines in glossy black!) THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!!

The Cult-Werk peg set "Racing" including foot pegs and shift pegs suitable for Harley-Davidson Softail models from 2018 to the present (NOT SUITABLE: for models with running boards)! The Footrests & The shift pegs were milled from an aluminum part and then powder-coated with a glossy black finish. In addition, an elaborately designed rubber with Cult-Werk lettering was produced to ensure a perfect grip and to round off the set visually perfectly! The footrests and the gearshift peg are attached to the motorcycle just like the original parts!

Suitable for all Harley-Davidson Softail models built from 2019 (FXDR 114, Sport Glide, Street Bob, Fat Bob, Low Rider, Breakout, Slim, Fat Boy, Deluxe, Standard & Heritage Classic).< /p> Milled and lasered from high-quality aluminum on the most modern 5-axis machining centers. The Cult-Werk clutch cover (Derby Cover) is anodized black. The look and design is then milled and lasered into the finished anodized part on state-of-the-art 5-axis machining centers. It can easily be exchanged for the original part and thus greatly enhances your Harley.

The Cult-Werk front spoiler "Bobber" suitable for all Harley-Davidson Softail models from 2018 (Breakout, Fat Bob, Fat Boy, FXDR 114, Street Bob, Softail Slim, Low Rider, Standard, etc...)! 100% precisely fitting ABS plastic part - NO GRP! No adjustment work required. All holes and millings are milled on the most modern 5-axis CNC machining centers, so that the front spoiler only needs to be screwed onto the supplied metal bracket. Complete mounting material is included. The metal bracket is screwed into the threaded inserts in the frame. The following two surface variants are available for this spoiler: - Painting available hig (Minimal painting effort because of perfect surface quality! The front spoiler is delivered ready for painting and can basically be painted immediately!) - Glossy black (No longer needs to be painted - thus saving Remove the entire painting costs! Remove the protective film and the front spoiler shines in glossy black!) THE PARTS APPROVAL WILL BE AVAILABLE IN THE "DOWNLOADS" TAB!!!

The Cult-Werk side cover set "Racing" in two different versions (clean for airride or with cutout for damper adjustment) suitable for almost all Harley-Davidsons Softail models from 2018 onwards and of course also suitable for the FXDR 114 from 2019 onwards (on the FXDR the covers are absolutely necessary in conjunction with our rear conversion "Racing")! IMPORTANT: To mount the left side cover on the FXDR, an additional threaded retaining bracket is required to fasten the side cover √∂nen. You can find this bracket in our shop with the item number HD-UNI013 or directly here on the detail page under accessories items! These lids are an ABS plastic part and are CNC milled on the most modern 5-axis machining centers! This ensures that these parts are of original equipment quality. It's not a cheap GRP! The side covers ÄûRacing‚Äú have been elaborately designed and create a cool and clean look after installation on your motorcycle! As with the original, the covers can be ordered with a cutout for damper adjustment or with a clean look for airride systems. The following two surfaces Variants of surfaces are available for this side cover set: - Can be painted (Minimal painting effort - because the surface is perfect! The side covers are delivered ready for painting and can in principle can be painted immediately!) - Glossy black (no need to be painted anymore - so you save the entire painting costs! Remove the protective film and the lids shine in glossy black!) < p>THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!! !

Suitable for Harley-Davidson FXDR, Low Rider S and Fat Bob models from 2018 onwards. IMPORTANT: It is absolutely necessary to remove the cat eyes on the fork so that the fork can move freely can immerse yourself in the covers! It's best to put them back on the fork covers! With this 2-piece fork cover kit from Cult-Werk you can cover the lower fork tubes. This covers the chrome-plated fork tubes and the entire fork appears beefier and completely black! The covers are screwed together with the brake calipers. This ensures that the covers are held securely. Our covers are made of high-quality steel and are milled on the most modern 5-axis machining centers and then powder-coated with a glossy black finish. This ensures absolutely the highest quality! Installation is very simple, the cover is just pushed over the fork tube and screwed tight. The kit is suitable for the original front fender as well as for our custom fenders. All parts required for assembly are included!

The Cult-Werk side license plate holder with GTú parts certificate for the listed countries as well as greens and a milled plate including insert frame for ºfor the license plate. Suitable for all Harley-Davidson Softail models - not for the FXDR 114 - from Year of construction 2018! (Street Bob, Low Rider, Fat Bob, Softail Slim, Softail Deluxe, Breakout, Fat Boy, Sport Glide & Heritage Classic - IMPORTANT: With the Sport Glide & Heritage Classic, the license plate holder can only be used without the cases be used!) The shortest license plate holder on the market guarantees you a TOP look! The license plate holder from Cult-Werk is made of high-quality steel, CNC Lasered and then powder-coated black! Incl. LED license plate lighting with E-test mark. License plate size:  W-180xH-200 mm (suitable for √ºfor Germany) orW-210xH-170 mm (suitable for √Austria) other sizes with slide-in frames will follow... Installation is very simple, the license plate holder is screwed onto the rear axle. This requires a special nut with collar, which is of course included in the scope of delivery. Since the Cult-Werk license plate holder has an extra short mounting foot compared to other license plate holders available on the market, it is visually much more appealing! Scope of delivery : - 1x side license plate holder incl. insert frame - 1x LED license plate light incl. E-test mark (pre-assembled!) - 1x special stainless steel nut with collar M24x2 - 2x grub screws for license plate attachment THE ASSEMBLY INSTRUCTIONS AND THE PARTS REPORT ARE AVAILABLE IN THE "DOWNLOADS" TAB!!! < /span>

These Cult-Werk brake caliper covers with 3D look are self-adhesive and are glued to the original silver covers of the brake caliper. When you order you will receive a set (2 pieces) of covers in glossy black with "Cult-Werk Customs" lettering and CWC logos! The covers fit all Harley-Davidson Softail models from 2000 to 2017, for Softail models from 2018 only on the front, for Dyna models from 2000 to 2017 and also for all Sportster models !

The belt protector from Cult-Werk is delivered in black and gives your motorcycle a cool look. Suitable for all Harley-Davidson Softail models from 2018 onwards (except FXDR!!). All bores and frä The parts are milled on state-of-the-art 5-axis CNC machining centers and then the part is powder-coated black! The belt guard gives your motorcycle a sportier and more subtle look than the original part thanks to the frozen elements.