Fork caps (suitable for Indian Motorcycle models: Scout Bobber from 2018)

Complete 6-piece fork cover kit "Long Version" in black with the lower covers made of aluminum or with folding linings suitable for Indian Scout Bobber models from 2018 onwards. With this kit from Cult -You can cover the fork tubes above, between and below the fork clamps as long as the original mask and the original turn signals including holder are removed! This way the fork tubes are covered and the entire fork appears beefier and completely black! This fork cover kit can be used with the original front fender or custom fenders. The individual covers are attached using hidden threaded pins and thus center themselves on the fork tubes. This ensures that the covers are held securely. So that the gaps between the covers and the fork bridges are exactly parallel, the covers were provided with the same bevels as the fork bridges. Our covers are made of high-quality aluminum and are manufactured using the most modern 5 -Axle machining centers milled and then powder-coated glossy black. This guarantees absolutely the highest quality! Installation is very simple, the upper and lower covers are simply pushed over the fork tube and screwed tight. On the inside of the lower cover there is a cutout for access to the fender and is therefore hardly visible. The following two variants are available for this 6-piece kit: - Kit made of pure aluminum (2x fork caps with milling, 2x upper fork cover "Long Version" & 2x lower fork cover) - Kit with folding linings (2x fork caps with Milling, 2x upper fork cover "Long Version" & 2x 41mm folding linings)

Complete 6-piece fork cover kit "Short Version" in black with the lower covers made of aluminum or with folding linings suitable for Indian Scout Bobber models from 2018 onwards. With this kit from Cult - Factory cover the fork tubes above, between and below the fork clamps as long as the original mask remains, but the original indicators including holders are removed! This way the fork tubes are covered and the entire fork appears beefier and completely black! This fork cover kit can be used with the original front fender or custom fenders. The individual covers are attached using hidden threaded pins and thus center themselves on the fork tubes. This ensures that the covers are held securely. So that the gaps between the covers and the fork bridges are exactly parallel, the covers were provided with the same bevels as the fork bridges. Our covers are made of high-quality aluminum and are manufactured using the most modern 5 -Axle machining centers milled and then powder-coated glossy black. This guarantees absolutely the highest quality! Installation is very simple, the upper and lower covers are simply pushed over the fork tube and screwed tight. On the inside of the lower cover there is a cutout for access to the fender and is therefore hardly visible. The following two variants are available for this 6-piece kit: - Kit made of pure aluminum (2x fork caps with milling, 2x upper fork cover "Short Version" & 2x lower fork covers) - Kit with folding linings (2x fork caps with Milling, 2x upper fork cover "Short Version" & 2x 41mm folding bellows)

Complete 6-piece fork cover kit "Long Version" in black with the lower covers made of aluminum or with folding linings suitable for Indian Scout Bobber models from 2018 onwards. With this kit from Cult -You can cover the fork tubes above, between and below the fork clamps as long as the original mask and the original turn signals including holder are removed! This way the fork tubes are covered and the entire fork appears beefier and completely black! This fork cover kit can be used with the original front fender or custom fenders. The individual covers are attached using hidden threaded pins and thus center themselves on the fork tubes. This ensures that the covers are held securely. So that the gaps between the covers and the fork bridges are exactly parallel, the covers were provided with the same bevels as the fork bridges. Our covers are made of high-quality aluminum and are manufactured using the most modern 5 -Axle machining centers milled and then powder-coated glossy black. This guarantees absolutely the highest quality! Installation is very simple, the upper and lower covers are simply pushed over the fork tube and screwed tight. On the inside of the lower cover there is a cutout for access to the fender and is therefore hardly visible. The following two variants are available for this 6-piece kit: - Kit made of pure aluminum (2x fork caps with milling, 2x upper fork cover "Long Version" & 2x lower fork cover) - Kit with folding linings (2x fork caps with Milling, 2x upper fork cover "Long Version" & 2x 41mm folding linings)

Complete 6-piece fork cover kit "Short Version" in black with the lower covers made of aluminum or with folding linings suitable for Indian Scout Bobber models from 2018 onwards. With this kit from Cult - Factory cover the fork tubes above, between and below the fork clamps as long as the original mask remains, but the original indicators including holders are removed! This way the fork tubes are covered and the entire fork appears beefier and completely black! This fork cover kit can be used with the original front fender or custom fenders. The individual covers are attached using hidden threaded pins and thus center themselves on the fork tubes. This ensures that the covers are held securely. So that the gaps between the covers and the fork bridges are exactly parallel, the covers were provided with the same bevels as the fork bridges. Our covers are made of high-quality aluminum and are manufactured using the most modern 5 -Axle machining centers milled and then powder-coated glossy black. This guarantees absolutely the highest quality! Installation is very simple, the upper and lower covers are simply pushed over the fork tube and screwed tight. On the inside of the lower cover there is a cutout for access to the fender and is therefore hardly visible. The following two variants are available for this 6-piece kit: - Kit made of pure aluminum (2x fork caps with milling, 2x upper fork cover "Short Version" & 2x lower fork covers) - Kit with folding linings (2x fork caps with Milling, 2x upper fork cover "Short Version" & 2x 41mm folding bellows)

Complete 6-piece fork cover kit "Mid Version" in black with the lower covers made of aluminum or with folding linings suitable for Indian Scout Bobber models from 2018 onwards. With this kit from Cult - Cover the fork tubes above, between and below the fork clamps as long as the original indicator holders remain! This way the fork tubes are covered and the entire fork appears beefier and completely black! This fork cover kit can be used with the original front fender or custom fenders. The individual covers are attached using hidden threaded pins and thus center themselves on the fork tubes. This ensures that the covers are held securely. So that the gaps between the covers and the fork bridges are exactly parallel, the covers were provided with the same bevels as the fork bridges. Our covers are made of high-quality aluminum and are manufactured using the most modern 5 -Axle machining centers milled and then powder-coated glossy black. This guarantees absolutely the highest quality! Installation is very simple, the upper and lower covers are simply pushed over the fork tube and screwed tight. On the inside of the lower cover there is a cutout for access to the fender and is therefore hardly visible. The following two variants are available for this 6-piece kit: - Kit made of pure aluminum (2x fork caps with milling, 2x upper fork cover "Short Version" & 2x lower fork covers) - Kit with folding linings (2x fork caps with Milling, 2x upper fork cover "Short Version" & 2x 41mm folding bellows)

Complete 6-piece fork cover kit "Mid Version" in black with the lower covers made of aluminum or with folding linings suitable for Indian Scout Bobber models from 2018 onwards. With this kit from Cult - Cover the fork tubes above, between and below the fork clamps as long as the original indicator holders remain! This way the fork tubes are covered and the entire fork appears beefier and completely black! This fork cover kit can be used with the original front fender or custom fenders. The individual covers are attached using hidden threaded pins and thus center themselves on the fork tubes. This ensures that the covers are held securely. So that the gaps between the covers and the fork bridges are exactly parallel, the covers were provided with the same bevels as the fork bridges. Our covers are made of high-quality aluminum and are manufactured using the most modern 5 -Axle machining centers milled and then powder-coated glossy black. This guarantees absolutely the highest quality! Installation is very simple, the upper and lower covers are simply pushed over the fork tube and screwed tight. On the inside of the lower cover there is a cutout for access to the fender and is therefore hardly visible. The following two variants are available for this 6-piece kit: - Kit made of pure aluminum (2x fork caps with milling, 2x upper fork cover "Short Version" & 2x lower fork covers) - Kit with folding linings (2x fork caps with Milling, 2x upper fork cover "Short Version" & 2x 41mm folding bellows)